검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 977

        61.
        2020.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 주행부, 주반송부, 동력전달부 등으로 구성된 배추를 인발하여 수확할 수 있는 궤도형의 자주식 인발형 배추수확기 개발, 인발기능과 이송기능을 갖는 주이송부의 설계 요인에 따른 포장 수확 성능 평가, 우리나라 품종별 재배작형에 따른 배추 물리적 특성 분석 및 시작기의 인발 및 반송 성능 향상을 위한 전처리부 설계를 수행하였다. 수확기 설계를 위한 기초 자료로 활용하기 위해서 우리나라 계절별 대표 품종(봄배추: 대통배추, 가을배추: 노랑배추, 월동배추: 겨울왕국)에 대해 수확시기의 물리적 특성을 조사하였다. 겉잎을 제거하지 않은 상태에서 크기를 품종별 평균값으로 나타냈을 때 3가지 품종에 있어서 폭은 22.7 ~ 30.6 cm, 높이 29.9 ~ 33.8 cm 범위로 나타났으며, 수직인발력은 평균 90.8~159.5 N으로 다양하게 나타났다. 인발각도, 속도비를 인발성능 요인으로 고려한 인발성능 평가에서 인발각도 35°, 수확기 주행 속도가 0.4 m/s 이고 인발벨트 속도 0.61 m/s 일 때의 속도비 1 : 1.22에서 인발률 80%로 인발정도가 가장 높게 나타났으나, 보다 향상된 배추 인발성능을 확보하기 위해서는 인발 시 배추를 안정적으로 전달할 수 있는 메카니즘이 추가로 요구되어 배추수확기 주이송부의 전방에 부착할 수 있는 유인부와 보조반송부로 구성된 전처리부를 전장 88 cm, 전폭 60 cm, 전고 15 cm의 치수로 설계・제시하였다.
        4,000원
        62.
        2020.01 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study earthquake records were collected for rock conditions that do not reflect seismic amplification by soil from global earthquake databases such as PEER, USGS, and ESMD. The collected earthquake records were classified and analyzed based on the magnitude and distance of earthquakes. Based on the analyzed earthquakes, the design response spectrum shape, effective ground acceleration, and amplification ratios for each period band are presented. In addition, based on the analyzed data, the story shear force for 5F, 10F, 15F, and 20F were derived through an analysis of the elastic time history for multi-DOF structures. The results from analyzing the rock earthquake record show that the seismic load tends to be amplified greatly in the short period region, which is similar to results observed from the Gyeongju and Pohang earthquakes. In addition, the results of the multi-DOF structure analysis show that existing seismic design criteria can be underestimated and designed in the high-order mode of short- and medium-long cycle structures.
        4,000원
        64.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, the shape optimization of the injector according to fuel and tip was conducted through analytical techniques. As an analysis condition, a flow rate of 0.08 kg / s was applied to the inlet and the outlet was given a condition of 0 Bar. The working fluid for each fuel was applied. As a result of the analysis, it can be seen that the pressure and velocity of model with the modified tip become higher than that of the base model in diesel. Compared with the base model in the case of gasoline, the modified model of the tip was found to have more stable injection when the pressure inside the combustion chamber and the straightness of the fuel were observed. Finally, in case of LPG injector, the same modified tip as gasoline was found to be the more stable injection. On the basis of this study result, the shape parameters of the injector can be inferred.
        4,000원
        65.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 바이오매스 폐기물인 Corynebacterium glutamium을 Alg를 이용한 고정화와 PEI 표면개질 과정을 통하여 유해 미세조류인 Microcystis aeruginosa를 제거할 수 있는 흡착소재인 PEI-AlgBF를 개발하였다. 녹조의 발생단계에 상관없이 PEI-AlgBF는 수계로부터 M. aeruginosa를 성공적으로 제거할 수 있었으며 유해조류 제거과정에서 M. aeruginosa 세포의 파괴를 유발하지 않았다. 흡착소재의 표면적은 M. aeruginosa의 제거효율에 매우 큰 영향을 주는 주요인자로 확인할 수 있었다. PEI-AlgBF를 사용한 M. aeruginosa 흡착/제거 방식은 기존 기술에 비하여 환경영 향성이 낮기 때문에 보다 안전하고 안정적인 유해조류의 제어 방식이 될 것이다.
        4,000원
        66.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 계룡산국립공원 공원문화유산지구로 지정된 동학사, 갑사, 신원사를 대상으로 식물사회학적 식생조사자료를 바탕으로 식생구조를 파악하여 생태적 특성을 구명하여 사찰림의 생태적 보전관리 방안을 마련하는데 기초 자료를 제공하고자 2018년 9월부터 2019년 5월까지 총 29개소의 산림식생조사를 수행하였다. 계층적 군집분석 결과, 느티나무-으름덩굴-황매화 군락(VU1), 졸참나무-작살나무-까치박달군락(VU2), 소나무-산벚나무-쇠물푸레나무군락(VU3)으로 식생유형이 각각 구분되 었으며, 각 식생단위별 지표종은 각각 12분류군, 8분류군, 6분류군으로 나타났다. 중요치 분석 결과, 모든 식생단위에서 느티나무의 중요치가 가장 높게 나타났으며, 종다양도 분석 결과, 식생단위 3의 종다양도가 0.939으로 다른 식생단위와 비교하였을 때 상대적으로 높게 나타났다. 식생유형과 무생물적입지환경, 생물적입지환경과의 상관관계분석을 CCA를 통해 분석한 결과, 무생물적 환경인자와의 관계는 식생단위 2와 해발고도가 음의 상관관계를 가지는 경향을 보였으며, 생물적 환경인자와의 관계에서는 뚜렷한 상관관계가 나타나지 않았다.
        4,300원
        67.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 울릉도 너도밤나무림의 동태변화를 통한 유지기작을 연구하기 위하여 알봉분지에서 성인봉 사이 소능선부, 사면상부 및 계곡부를 포함한 너도밤나무가 우점하는 임분 1ha(20m×20m, 25개소)를 대상으로 흉고직경급 분포, 중요치, 종조성 분석을 통해 미세지형별 너도밤나무림의 임분구조 특성을 파악하기 위하여 실시하였다. 너도밤나무림 전체에서 흉고직 경급 10cm 미만에서는 소능선부와 사면상부가 계곡부에 비하여 개체수가 많이 나타났으며, 흉고직경급 10-25cm에서는 소능선부의 개체수가 가장 많이 나타났고, 흉고직경급 25-45cm에서는 사면상부, 45cm 이상의 계곡부의 개체수가 가장 많이 나타났다. 모든 지형에서 흉고직경급 10cm 미만의 너도밤나무가 다수 분포하고 있는 것은 종자번식이 아닌 영양번식 또는 교란에 의한 맹아갱신인 것으로 판단된다. 지표종 분석결과 소능선부에서는 솔송나무, 만병초, 호자덩굴, 섬벚나무, 마가목, 큰두루미꽃 등 8종이, 계곡부에서는 풍게나무, 관중, 난티나무, 섬노루귀, 말오줌나무, 큰연영초, 공작고사리, 황벽나무 8종이 유이하게 나타났다.
        4,000원
        68.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 4대강 보 설치에 따른 실지렁이류의 분포 특성을 파악하고자 연구를 실시하였다. 현지조사는 2018년 3월부터 10월까지 총 10회 실시하였다. 조사결과 총 18종 35,390 ind. m-2 개체가 출현하였다. Limnodrilus hoffmeisteri (77.1%)이 우점종, Branchiura sowerbyi (9.5%)이 아우점종으로 분석되었다. 건중량 분석결과 총 32.418 g m-2이 계측 되었으며, 각 종별 건중량과 TOC 농도와의 상관 분석 결과 실지렁이, 아가미지렁이와 TOC 농도 간 음의 상관성을 갖는 것으로 나타났다. 실지렁이류와 물리적·이화학적 요인들 간의 다변량 상관분석 결과 퇴적토 깊이, Clay 비율, Silt 비율, Cobble 비율, Pebble 비율, pH, TOC 항목과 상관성을 갖는 것으로 분석되었다 (p<0.05, p<0.01). 조사지역별 실지렁이류 개체수와 퇴적토 깊이 및 Clay의 비율과 비교·분석한 결과 퇴적토의 깊이와 Clay의 비율이 높을수록 개체 수가 많은 것으로 나타났다. 조사시기에 따른 실지렁이류의 개체수, TOC 비교·분석결과 3월부터 10월까지 개체수는 감소하는 경향성을 나타냈으며, TOC는 증가하는 경향성을 갖는 것으로 분석되었다.
        4,200원
        69.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Recently, the occurrence frequency of earthquake has increased in Korea, and many cultural assets have been damaged. Cheomseongdae is a valuable cultural assets that must be preserved historically and culturally. But, the masonry structure such as Chemseongdae is vulnerable to lateral forces. Therefore, in this study, structural modeling and dynamic analysis are performed to reflect the ground state and structural form of Cheomseongdae. Also, discrete element analysis technique is applied and dynamic behavior characteristics are analyzed according to earthquake load. For this purpose, displacements and stresses according to locations are reviewed and then swelling and distortion are analyzed.
        4,000원
        76.
        2019.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 PMF 모델을 이용하여 PM2.5에 대한 오염원 확인 및 오염원별 기여도를 분석하였다. A시의 배출원별 기여도 순위는 Secondary Sulfate가 19.8%로 가장 기여도가 높고, 그 다음으로는 Mobile 19.5%, Industry 16.0%, Biomass Buring 14.1%, Secondary Nitrate 14.1%, Oil Combustion 11.6%, Aged Sea Salt 2.6%, Soil 2.5% 등으로 분석되었다. Sulfate와 Ammonium 농도가 배출원별 프로 파일에서 기여도가 가장 높은 오염원으로 분석되었는데, 이는 대기 중에서 가스상 전구물질(SOx와 암모니아 가스)이 광화학 반응하여 생성된 2차 에어로졸인 것으로 분석되었다.
        4,000원
        77.
        2019.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 CMB(Chemical Mass Balance) 모델을 이용하여 PM2.5에 대한 오염원 확인 및 오염원별 기여도를 분석하였다. A시의 배출원별 기여도 순위는 비산먼지(30.1%) > 생물성 연소(21.9%) > 2차 오염물질(21.1%) > 도로이동오염원(19.3%) > 면오염원(7.6%) 순이고, CMB 모델 기여도와 CAPSS(Clean Air Policy Support System) 배출자료 기여도 비교에서 증가한 배출원은 생물성 연소와 2차 오염물질이고, 감소한 배출원은 도로이동오염원, 비산먼지, 면오염원으로 분석되었다.
        4,000원
        78.
        2019.09 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Aluminum nitride (AlN) has versatile and intriguing properties, such as wide direct bandgap, high thermal conductivity, good thermal and chemical stability, and various functionalities. Due to these properties, AlN thin films have been applied in various fields. However, AlN thin films are usually deposited by high temperature processes like chemical vapor deposition. To further enlarge the application of AlN films, atomic layer deposition (ALD) has been studied as a method of AlN thin film deposition at low temperature. In this mini review paper, we summarize the results of recent studies on AlN film grown by thermal and plasma enhanced ALD in terms of processing temperature, precursor type, reactant gas, and plasma source. Thermal ALD can grow AlN thin films at a wafer temperature of 150~550 oC with alkyl/amine or chloride precursors. Due to the low reactivity with NH3 reactant gas, relatively high growth temperature and narrow window are reported. On the other hand, PEALD has an advantage of low temperature process, while crystallinity and defect level in the film are dependent on the plasma source. Lastly, we also introduce examples of application of ALD-grown AlN films in electronics.
        4,200원
        79.
        2019.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study investigated the indoor air quality conditions of public transportation according to the changing of seasons and different times of the day. We measured the concentration of PM10 and CO2, which are substances subject to control measures and limits established by Ministry of Environment for public transportation, and compared actual levels whit the legal standard. Public transportation was classified as subway lines (form 1 to 4), trains (KTX, ITX) and buses. The PM10 concentration was measured as being high during peak hours in winter compared to that in summer. On the other hand, the PM10 concentration in trains and buses was shown to be low. The CO2 concentration in public transportation was recorded as being higher than the legal standard. PM10 concentration was affected by the inflow of outdoor air, and CO2 concentration was influenced by the number of people in a particular space or environment. This survey focused on the indoor air quality of public transportation. The basic data could prove useful in formulating policies to promote and maintain good indoor air quality with regard to public transportation.
        4,000원
        80.
        2019.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The stone pagoda continued to be damaged by weathering and corrosion over time, and natural disasters such as earthquake are accelerating the destruction of cultural properties. Stone pagoda has discontinuous structure behavior and is very vulnerable to the seismic load acting in lateral direction. It is necessary to analyze various design variables as the contact surface characteristics play an important role in the dynamic behavior of stone pagodas. For this purpose, contact surface characteristics of stone pagoda can be classified according to surface roughness and filler type, and representative model is selected and structural modeling and analysis are performed using the discrete element method. Also, the seismic load according to the repetition period is calculated and the dynamic analysis is performed considering the discontinuous characteristics of the stone pagoda. Finally, the seismic behavior characteristics can be analyzed by the evaluation of stresses, displacements and structural safety.
        4,000원
        1 2 3 4 5