검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 283

        101.
        2011.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 염류집적 국화 재배지 토양적응성 인산분 해미생물 탐색하고 선발된 미생물 시용을 통한 염류집 적 국화 재배지 토양에서의 토양 화학성의 변화를 조 사하였으며 이를 통하여 염류 집적 국화 재배지 토양 환경 개선 기술을 개발하고자 수행되었다. 시험에 사용 된 인산분해미생물은 염류집적토양에서 분리된 Pseudomonas putida(KSJ11), Acinetobacter calcoaceticus (KSJ3) 및 Acinetobacter calcoaceticus (WP20) 3종류 이었으며 미생물의 제형은 버미큘라이트에 혼합되어 있 는 상용화된 제품을 이용하였다. 시험장소는 광주광역 시 광산구 소재 신우화훼농장의 15년간 작물이 재배되 어 염류집적현상이 나타나는 국화재배지에서 처리구 82 m2에 각각의 미생물 제재 250 L씩 시용하였다. 염 류집적이 이루어진 국화재배온실에 처리된 인산분해미 생물 Acinetobacter calcoaceticus(KSJ3; WP20)는 유 효인산을 효율적으로 분해하는 것으로 나타났으며, 특히 Acinetobacter calcoaceticus(WP20)는 염류의 분 해능력이 높았다. 인산분해미생물 시용에 따라 토양내 칼륨, 칼슘 및 마그네슘의 함량의 증가가 A. calcoaceticus(KSJ3; WP20)처리구에서 뚜렷하게 나타났 으며 이러한 변화의 영향으로 판단되는 토양내 전기전 도도도 증가되었다. 또한 인산분해미생물 시용은 선충 밀도의 감소효과를 나타내어 토양환경개선을 위한 재 료로 활용될 가능성을 나타내었다. 결과적으로 염류집 적이 이루어진 국화재배 온실에서의 인산분해미생물 시 용은 처리된 미생물의 종류에 따라 차이를 나타내었지 만 토양의 유효인산량 증가와 양이온의 유용화에는 분 명한 효과를 나타내었다. 따라서 염류집적 토양에서의 인산분해미생물 시용은 토양양분의 효율적인 사용을 가 능하게 할 수 있는 방안이 될 수 있기 때문에 시비량 절감 등의 방법으로 활용할 수 있다고 판단되었다.
        4,000원
        102.
        2011.09 구독 인증기관 무료, 개인회원 유료
        Recently, a market of architecture is requiring buildings of long spanned structures as most buildings become taller and larger. For being long spanned structures, elements of buildings must be light. As an alternative proposal, various hollow-core slabs and flat plate salbs were developed and used frequently in the inside and outside of the country. But the study of the hollow-core slabs using deck plate and assembly of light weight is the first. In the present study, Flexural and vibration tests were performed on the hollow-core slabs using deck plate and assembly of light weight to investigate the flexural behavior and serviceability. Four test specimens were used for test parameters; one hollow-core slab with an assembly of light weight, and three hollow-core slabs with deck plate and an assembly of light weight. The test parameters also included amount of tension bar and existence of shear reinforcement. The test results showed that the hollow-core slabs with deck plate and an assembly of light weight had a crack of shear, so shear reinforcement must be conducted.
        4,000원
        103.
        2011.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Christensen(1997)은 혁신자의 딜레마(innovator`s dilemma)에서 디스크드라이브(disk drive) 시장을 사례분석한 뒤, 성공기업들이 후발자들에게 추월당하는 이유를 와해성 기술(disruptive technology) 때문이라고 주장하였다. 그러나 기술에 초점을 맞췄던 그의 초기 이론은 시간이 지남에 따라 모든 종류의 혁신들을 설명하는데 적용되었으며, 이 과정에서 그는 기술(technology)과 비즈니스 모델(business model)을 개념적으로 구분하지 않고 초기 와해성 이론을 광범위하게 적용하였다(Markides, 2006). 또한 그의 이론은 시장과 산업의 변화를 체계적으로 설명하기 위한 이론적 모형으로서 설명력이 떨어지며, 이론적 모형으로서의 명료함을 높일 수 있는 추가 작업들이 필요하다는 지적이 있었다(Danneels, 2004). 본 연구에서는 C.M. Christensen에 대한 기존 연구들의 지적들을 바탕으로 와해성 이론의 설명력을 높이기 위해서는 와해성 혁신을 하나의 프로세스로 이해하는 것이 필요하며, 이 프로세스를 보다 명료히 이해하기 위해 기술의 혁신과정(phase of technology innovation)과 비즈니스 모델의 혁신과정(phase of business model innovation)으로 나누어 구분하고자 한다. 또한 이 과정에서 기술과 비즈니스 모델을 연결하는 개념으로서 보완기술(enabling technology)의 역할을 강조하고자 한다. 본 연구가 제안하는 개념적 틀의 타당성을 인터넷 쇼핑몰의 성장과정에 적용하여 검증하고자 한다. 그 결과 첫째, Christensen이 와해성 혁신이라고 주장한 인터넷 관련 비즈니스 모델은 성장과정에 있어 기술적 성장과 비즈니스 모델의 성장으로 구분이 가능한 과정이었다. 둘째, 와해성 혁신 단계에 도달하기 위해서는 핵심 기술(core technology)과 비즈니스 모델 사이에 보완기술이 존재하며 보완 기술의 성숙 정도에 따라 비즈니스 모델의 완성도가 결정되어, 혁신의 시장성과가 결정됨을 확인하였다. 따라서, Christensen이 언급한 와해성 혁신은 기술의 혁신과 비즈니스 모델의 혁신으로 구분할 때 보다 명료한 이해가 가능하며, 보완기술이 존재할 경우 비즈니스 모델의 시장성과는 핵심 기술이 와해성 기술로 인정받은 직후보다는 보완기술들이 성숙된 이후에 더욱 확연히 드러남을 증명하였다.
        7,700원
        104.
        2011.05 구독 인증기관·개인회원 무료
        메뚜기목 땅강아지과에 속하는 땅강아지 Gryllotalpa orientalis (Orthoptera: Gryllotalpidae)의 생물학적 특징 구명 및 인공사육을 위해 야외에서 300여 개체를 채집하여 25±2℃, 65±10%RH, 16:8LD에서 실험을 진행하였다. 월동을 마친 암 컷의 산란전 포란 기간은 평균 35.5일이 소요되었으며, 월동개체의 수명은 평균 85.0일로 조사되었다. 땅강아지의 산란수는 평균 55.2개, 산실당 평균 35.7개로 조 사되었다. 사망률은 부화 직후 20.3%이며, 2령 10%, 3령 18%, 4령 20%, 5령 12% 로 조사되었다. 산란된 알의 크기는 평균 1.5×1.2mm이었고 부화기간은 평균 18.5 일이 소요되었다. 약충의 평균 발육기간은 1령 12.9±1.3, 2령 9.3±0.6, 3령 8.5±2.9, 4령 15.8±1.9, 5령 19.3±5.7, 6령 16.8±2.2, 7령 21.4±2.7, 8령 23.6±4.8일 이었고, 합계 116.9±11.5일로 조사되었다. 부화 후 100일까지 각각의 온도에서 발 육한 땅강아지의 체장 및 령기(Instar)는 21℃에서 1.7±0.1cm(6령), 25℃에서 1.9±0.1cm(6.7령), 27℃에서 2.4±0.4cm(7.8령)으로 조사되었다. 인공사료는 밀배 아(66.1%)를 주성분으로 카제인(18.4%), 염류(5.9%), 소르빈산(1.5%), 메틸파라 벤(0.7%), 비타민(7.3%)등을 혼합하여 제작하였다. 인공사료에 파리번데기 체액 을 0~20%로 다르게 첨가하여 사육한 결과 발육기간과 사망률에 차이가 없었다. 그러나 인공사료의 생존률은 평균 89.2%로 자연사료만 섭식한경우인 36.1%보다 높았다.
        106.
        2011.03 구독 인증기관 무료, 개인회원 유료
        In this study, as a part of the seismic retrofitting for school buildings, proposed of a new type of rotary friction damper, reviewed the performance and developed a experiment formula for the practical application. The rotary friction damper was composed of 4 shear plane using 2 friction pad. Considering a variety of yield moment, it was designed that clamping forces can be applied. The number of bolts were 9, 13 and thε clamping forces were 8 levels that the maximum load is the standard clamping forces. ±20mm displacement of the cyclic loading test were performed. As a result, the records of friction damper were stable. But sliding was ensured if the stress is 10-15% of the relation formula of sliding load in KBC 2009 by the bolts joining. However, when it is designed of that were inserted additional members for implementation of friction, the design of the level of 10% of the formula in KBC 2009 will be possible. And the design equation that is converted into the moment-rotation is proposed for the detailed design.
        4,000원
        107.
        2011.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 오미자를 이용한 산림소득 증대를 목적으로 오미자의 생산현황을 분석하고, GIS를 기반으 로 전라북도 장수군 산림의 오미자 재배적지를 분석하였다. 2007년도 대비 2009년도의 우리나라 오미 자 생산량은 3,786,237 ㎏ 으로 297.2%의 누적증가율을 나타냈으며, 이중 경상북도가 2,013,379 ㎏ (53.2%)로 가장 많은 양을 생산하였다. 전라북도의 생산량은 407,210 ㎏ (10.8%)로 전국에서 3번째로 많은 양을 생산하였으며, 장수군이 131,000 ㎏ (32.2%)로 가장 많은 양을 생산하였다. 한편, 2008년도 기준 장수군의 오미자 재배면적은 159.0 ㏊이었으며, 장수읍이 48.8 ㏊ (30.7%)로 가장 많은 면적을 차 지하고 있었다. GIS를 기반으로 분석한 장수군 산림의 오미자 재배적지는 1,199 ㏊이었으며, 읍․면별 적 지 면적은 천천면 304 ㏊ (25.4%), 장수읍 272 ㏊ (22.7%), 계남면이 172 ㏊ (14.3%), 번암면 158 ㏊ (13.2%), 장계면 135 ㏊ (11.3%), 계북면 129 ㏊ (10.8%) 그리고 산서면 29 ㏊ (2.4%) 순이었다. 장수군 의 오미자를 통한 산림소득 증대를 위해서는 본 연구결과를 충분히 고려한 효율적이고 효과적인 투자가 이루어져야 할 것으로 생각되었다.
        4,000원
        108.
        2011.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 GIS․RS를 기반으로 무주군 산림의 이산화탄소 (CO2) 흡수량 및 바이오에너지 공급 잠재량을 추정하기 위하여 수행하였다. 추정 결과, 무주군 산림은 7,800,130 tCO2를 흡수한 것 으로 추정되었으며, 이용 가능한 전체 바이오에너지 공급 잠재량은 11,868,202,837 M㎈인 것으 로 추정되었다. 또한, 연간 바이오에너지 공급 잠재량은 314,876,637 M㎈/year이었으며, 이는 겨울철 난방용 바이오에너지로 무주군 전체 가구수 10,902 가구보다 많은 11,214 가구에 공급할 수 있는 것으로 추정되었다. 본 연구는 국가단위 산림의 CO2 흡수량 및 바이오에너지 공급 잠 재량 추정에 있어서 그 방법론을 제시하였으며, GIS․RS 등의 최신 기법을 기반으로 정밀한 산림 정보를 이용한 국가단위의 추정은 신뢰도를 더욱 높일 수 있을 것으로 판단되었다.
        4,300원
        109.
        2010.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 풍하중을 받는 고층 구조물의 진동저감을 위하여 사용되어온 전단형 점탄성 감쇠기의 2D, 3D FEM 모델을 이용하여 정밀하게 해석하여 점탄성재료와 이들을 결합하는데 사용하는 재료의 특성이 에너지 소산에 미치는 영향을 평가하였다. 특히 점탄성재료와 강재의 접합방식 및 크기, 형상등이 에너지 소산능력에 미치는 영향을 분석하였다. 이러한 정밀해석과정을 통하여 점탄성 감쇠기의 이력거동을 고찰 분석하고 이를 댐퍼설계에 활용하기위한 설계식을 제안하는 기초자료로 사용할 수 있게 하였다.
        4,000원
        110.
        2010.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        풍하중을 받는 구조물은 해석의 편의상 층당 3개의 자유도를 가지는 해석모델을 사용한다. 구조물의 입면 형상이 비정형이 되고, 평면내 구조재의 배치가 층에 따라 변경이 되면 각층의 질량중심과 강성중심의 차이에 의해서 병진방향상호간 또는 병진방향과 비틀림 방향이 상호연관되어 이에 따른 각 방향의 고유모드가 연계된 진동특성을 가지게된다. 본 연구에서는 풍하중에 의한 구조물의 응답에 가장 큰 영향을 미치는 저차의 3개의 병진-비틀림 모드가 연계된 구조물의 진동을 저감하기위한 능동제어기법에 대하여 다룬다. 이를 위하여 풍동실험으로부터 구한 각 방향 밑면 전도모멘트와 비틀림모멘트가 연계모드에 작용하는 모달풍하중으로 치환된 운동방정식을 유도하고, 운동방정식에 기반한 상태방정식을 통하여 제어력을 산정한다. 제어력 포화를 고려하여 위상분할 제어알고리듬과 H∞ 제어알고리듬이 합성된 새로운 제어알고리듬을 제안하였으며, 풍동실험을 수행한바 있는 대상구조물에 대해 수치시뮬레이션을 수행한 결과 기존 제어알고리듬인 LQR에 비해 대등한 제어효과를 가지면서 제어력의 크기를 줄일 수 있는 것을 검증하였다.
        4,000원
        111.
        2010.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 풍진동제어를 위한 제어기 설계에 있어서 시스템식별에 기반한 모델의 차수 축소가 미치는 영향을 검토하였다. 실제 제어기 설계에 있어서 구조해석 모델이 이용될 수 없고 시스템식별이라는 중간과정을 거쳐서 얻어진 모델이 적용됨을 반영하여 원모델을 대상으로 풍하중에 대한 시간이력해석을 수행하고 이를 기초로 시스템식별을 수행하였다. 시스템식별을 통해 얻어진 상태방정식 모델에 모델축소 기법을 적용하였으며, 시스템식별에서 발생하는 측정잡음이 측정잡음이 모델의 정확도와 제어효과에 미치는 영향을 함께 검토하였다. 또한 모델축소 기법을 적용하여 얻어진 다양한 차수의 모델을 대상으로 제어기를 설계하고 성능을 비교함으로써 모델 차수가 제어효과에 미치는 영향을 검토하였다.
        4,000원
        113.
        2010.10 구독 인증기관·개인회원 무료
        네발나비과 세줄나비속 나비는 열대 및 아열대지방에 153여종이 분포하며, 한 국에는 11종이 기록되었다. 나비류의 분류학적 연구는 성충의 날개무늬 패턴을 위 주로 형태연구가 주를 이루어왔다. 세줄나비(Neptis)속 역시 날개무늬패턴의 형태 적 유사성이 높다. 국내의 세줄나비의 종들 가운데는 종간 형질의 분리가 다소 모 호하거나, 중복되는 경우가 있어 왔다. 따라서 이번 분자분류학적 연구를 통해서 세줄나비속 국내종에 대한 기존 종 인식이 정확한 것인지를 재검토해 보고자 하였 다. 이번 연구에서는 기존의 형태분류를 통해 확증된 11종 33개체에 대한 DNA 바 코드를 분석하였으며, NCBI의 Blast search를 통해 확보된 국외산 3종 22개체를 실험에 추가 하였다. 그 결과, COI유전자 서열 차이는 0~16.2%를 나타내었고, 종 내 서열 변이율은 0.0~1.14%였으며, 종간 서열차이는 3.3~16.2%였다. 이로 볼 때, 1.14~3.3%의 Barcoding gap이 형성되는 것을 확인할 수 있었다. 따라서, Divergence threshold approach를 통해 한국산 세줄나비속의 종들은 확실히 구분 되었으며, Clade based approach에서도 각 종들의 개체들은 Barcoding gap을 반 영하면서 종별로 묶이는 것을 확인할 수 있었다. 이 결과는 기존의 형태 분류와 100% 일치하였으며, 결국 한국산 세줄나비속에 대한 종 동정에 있어 DNA 바코드 의 활용적 가치가 높은 것으로 나타났다
        114.
        2010.09 구독 인증기관 무료, 개인회원 유료
        In this study, vertical extension type TMD(VE-TMD) whose vertically extended stories behave like a tuned mass damper, with Lead-Rubber Bearing(LRB) between the top of existing structures and the bottom of the extended stories was proposed. A shaking table tests for a 5-story reinforced concrete model, which is of 2.2 Hz natural frequency. A vertical extended model consisted of a steel frame, with two base isolators between the top of the RC model and the bottom of the extended stories. Those base isolators' lateral stiffness was equal to 31.392 kN/m which was calculated with the fundamental period plus 0.2 tonf, weight of a single story of the model. The test for the specimen was shaking table test excited by a harmonic loads for the fundamental period of the structure. The test results indicated that the VE-TMD improved seismic performance by 40 % in displacement responses for all of frequency-domain.
        4,000원
        115.
        2010.09 구독 인증기관 무료, 개인회원 유료
        Recently, practical application of high tension bar is attempted. The main object of using high tension bar is strengthening of material property and decreasing of steel amount. If using high tension bar which is not a definite yield strength,according to strain ratio of high tension bar tensile and compressive dominate mode ciearly, there being a possibility dividing becoming difficult. Specially, Providing steel ratio of balanced destruction is very difficult. In this study, high tension bar to apply to flexural member and the behavior experiment bending after one, will consider high tension bar the application possible standard of existing.
        4,000원
        116.
        2010.04 구독 인증기관·개인회원 무료
        118.
        2010.03 구독 인증기관 무료, 개인회원 유료
        In this study, compare the results that used period of an object building and a structural analysis program in order to to analyze the effect that a slab element to oppose a vertical load opposes to lateral loading of a structure. Compared with to analyze the results to the Diaphragm which is existing analysis and a way do modeling to an plate element to slab element of RC wall type structures to give a change of rigidity with 100%, 50%, 30%
        4,000원
        119.
        2010.03 구독 인증기관 무료, 개인회원 유료
        In this study, a shear wall-slab damper system for seismic retrofitting of existing low-rise school buildings was proposed. The proposed system is to control the earthquake-induced vibration of the existing building structures using the energy dissipation effect of hysteretic damper inserted between the extended shear wall and existing moment frame. The numerical analyses were performed to investigate the vibration control efficiency of the shear wall-slab damper system and to identify the range of optimal yielding strength of the slab damper. In addition, variation of shear force of the extended shear wall with regard to the yield strength of the dampers in a range from 10 to 100 percent of the maximum base shear force of the retrofitted structure was investigated. The numerical analyses results showed that the maximum displacement of the structures with the slab damper whose yield strength is equal to 20 percent of the maximum base shear. On top of that, the slab damper system reduced the shear force of the shear wall by about 50 percent in comparison with the existing frame-shear wall system with rigid diaphragm slabs.
        4,000원
        120.
        2009.09 구독 인증기관 무료, 개인회원 유료
        Modular construction uses pre-fabricated volumetric units that are transported and installed on site as fitted-out and serviced 'building blocks'. The use of modular construction is directly influenced by the client's requirements for speed of construction, quality, reuse and benefits of economy. These benefits may be maximized under the condition that modules are almost manufactured in factory and transported to the site without any damages. In Korea, some damaged modules were reported on the process of transportation. This paper quantifies the vibration performances of modular units under transportation by analytical and experimental methods. Quantified vibration performances are reflected to the transportation guide of modular units.
        4,000원