검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 47

        1.
        2023.05 구독 인증기관·개인회원 무료
        High level radioactive waste disposal repository is faced thermos-hydro-mechanical-radioactive condition. Factors according to these complex conditions are measured using multiple sensors installed in the disposal repository to check integrity of the structure. Wires of the sensors can be potential pathways of groundwater and nuclide flow and these pathways accelerates bentonite saturation. Therefore, it is worth to developing wireless sensors buried in the bentonite buffer which can communicate without wires. In start of the study, widely-utilized wireless communication methods including WiFi and LoRa are tested using compacted bentonite blocks to estimate the performance of them. Compacted bentonite blocks are prepaired using di-press method with metal molds and the dry density of them are about 1.6 g/cm3. All wireless communication methods are well communicated through the bentonite blocks over 50 cm. The further experimental tests will be conducted with different dry density and water contents. The results of these experimental tests give a possibility of wireless communications in compacted bentonite buffer and will be utilized for the design of wireless sensor systems for the repository monitoring.
        2.
        2021.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Domestic as well as global automobile manufacturers are making greater efforts in cost reduction to strengthen the competitiveness. In this study, we developed a program to effectively manage standard time of automobile assembly line, and confirm based on A-automobile factory data. For the purpose, we develop the system which is possible to manage standard time as well as calculate man-hour for automobile assembly line.
        4,000원
        3.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The Location Based Service is growing rapidly nowadays due to the universalization of the use for smartphone, therefore the location determination technology has been placed in an important position. This study suggests a method that can provide the estimate of users’ location by using PDR method and smartphone geomagnetic sensor data. This method assists the measure of enhancing the accuracy of indoor localization. Moreover, it is to study ways to provide the exact indoor layout for evacuating the workers in emergency such as fires and natural disasters.
        4,000원
        4.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The LBS(Location Based Service) technology plays an important role in reducing wastes of time, losses of human lives and economic losses by detecting the user's location in order by suggesting the optimal evacuation route of the users in case of safety accidents. We developed an algorithm to estimate indoor location, movement path and indoor location changes of smart phone users based on the built-in sensors of smartphones and the dead-reckoning algorithm for pedestrians without a connection with smart devices such as Wi-Fi and Bluetooth. Furthermore, seven different indoor movement scenarios were selected to measure the performance of this algorithm and the accuracy of the indoor location estimation was measured by comparing the actual movement route and the algorithm results of the experimenter(pedestrian) who performed the indoor movement. The experimental result showed that this algorithm had an average accuracy of 95.0%.
        4,000원
        5.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        With the development of public transportation, the use of subways as a means of transportation in the city center is increasing, so that vibrations and structural noises are emerging as a new environmental issues. This study can be used as a basis for research on subway safety and shock mitigation by applying vibration-proof mat.
        4,000원
        6.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The latest issue is the smart factory. In order to implement this smart factory, the most fundamental element is to establish product specifications for factors affecting the product, obtain useful data to analyzed and predicted, and maintain safety. But most manufacturers have many errors. Therefore, the purpose of this study is to verify factors of product through statistical techniques and to study the process control and safety.
        4,000원
        7.
        2019.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The diesel engine generate many pollutants such as PM(Particulate matter) and NOx(Nitrogen oxide). So the SCR(Selective catalytic reduction) must be required to meet the emission standard. The SCR catalyst market is growing rapidly, and the automobile markets using alternative energy sources are growing rapidly. This study deals with optimization of the calcination process the manufacturing process of SCR catalyst to be competitive. The calcination process is a bottleneck and it is required to optimize productivity and accept to be safety, But we cannot trade off anything in terms of safety. We applied DOE(Design of experiments) among many research methods performed in various fields. In order to achieve quality and productivity optimization. The dependent variables in the DOE were selected as NO Conversion(%). The independent variables were selected as the calcination temperature, soaking time and fan speed RPM. the CCD(Central composite designs) constructs response surface using the data onto experience and finds optimum levels within the fitted response surfaces. Our tests are our stability guarantee and efficient together with operation.
        4,000원
        8.
        2019.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Along with industrial development, various architectural structures have become bigger and higher, leading to an expansion in the size and capacity of construction equipment. And with the development of public transportation, the use of subways as a means of transportation in the city center is increasing, so that vibrations and structural noises are emerging as a new environmental issue. Considering that architectural structures may be used from several decades to hundreds of years after the time of construction, they can be seen as semi-permanent. Due to changes in the vibration-proof polyurethane mats installed in the foundation of these structures, settling may occur and vibration reduction may become inadequate. Therefore, in view of service life, it is necessary to have a high-level standard of reliability and stability. In accordance with this, the Floating Floor System, which uses soft polyurethane foam and can be constructed within a relatively short period of time, has excellent vibration resistant characteristics. It is presented as a great alternative solution to the issue of vibrations caused by subways, railways and building structures. At present, vibration-proof polyurethane mats have been developed up to the same product level as in other advanced countries. However, in the construction of structure foundations, the physical properties of this product and its shape incur changes. If they are installed as such in the structure of a building, it may cause significant impact on stability, requiring that this cause be urgently identified and improved.
        4,000원
        9.
        2018.11 구독 인증기관 무료, 개인회원 유료
        This study deals with optimization of the calcination process the manufacturing process of SCR catalyst to be competitive. The calcination process is a bottleneck and it is required to optimize productivity and quality. We applied DOE(Design of experiments) among many research methods performed in various fields. In order to achieve quality and productivity optimization. The dependent variables in the DOE were selected as NO Conversion (%). The independent variables were selected as the calcination temperature, soaking time and fan speed RPM. The CCD(Central composite designs) constructs response surface using the data onto experience and finds optimum levels within the fitted response surfaces.
        4,000원
        10.
        2018.11 구독 인증기관 무료, 개인회원 유료
        Accompanied with the industrial development, and enlarging and heightening buildings, building equipments are also enlarging. These changes are serious to the cause of structure noises. The Floating Floor System which uses the soft foam polyurethane are becoming popular in construction areas for its short construction period and well vibration proof ability, hence it is becoming wide in the marketing volume. We were able to enhance the physical characteristics of the vibration proof polyurethane mat with this study. As a result, we were also able to secure material competitiveness by meeting the requirements of customer satisfaction through enhancement in estimated material lifetime and physical characteristics.
        4,000원
        11.
        2018.11 구독 인증기관 무료, 개인회원 유료
        In recent years, the use of smartphones is becoming more common with the pace of development of society, and the development of technologies utilizing smartphones is proceeding rapidly. Although most LBS technologies are used in combination with a GPS system, there is a disadvantage that it is difficult to receive GPS signals according to the characteristics of buildings. Therefore, in this paper we conducted a study on the smartphone users’ indoor position estimation only using the built-in sensor of smartphone without a connection with smart devices, and it showed that the accuracy was increased.
        4,000원
        12.
        2018.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The Location Based Service is growing rapidly nowadays due to the universalization of the use for smartphone, and therefore the location determination technology has been placed in a very important position. this study suggests an algorithm that can provide the estimate of users' location by using smartphone sensors. And in doing so we will propose a methodology for the creation and update of indoor map though the more accurate position estimation using smartphone sensors such as acceleration sensor, gyroscope sensor, geomagnetic sensor and rotation sensor.
        4,000원
        13.
        2018.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The rate of fire in buildings is gradually increasing in these days and the damage of property are severely increasing. This study suggests a methodology that provides information of the emergency exits based on indoor location services. The methodology uses determination technology and the latest update of indoor map generation via the built-in sensors of smartphone. This paper enhances the accuracy of indoor localization, and also it is to study how to provide exact indoor layout for rescuing the workers in emergency, such as fires and natural disasters.
        4,000원
        14.
        2017.11 구독 인증기관 무료, 개인회원 유료
        우리나라 중소기업은 후진국 및 개발도상국의 저가공세와 원자재 가격인상, 환율의 변동과 같은 대외적문제와 임금인상, 물가인상, 금리 및 주가의 불안정과 같은 대내적 문제로 어려움을 격고 있다. 이러한 상황에서 비교적 단기간에 경쟁력을 확보하여 치열한 국내외적 기업환경에서 살아남기 위한 최선의 방안은 원가 절감이라 할 수 있다. 대부분 중소기업의 경우 사전원가관리의 장점을 알고 있음에도 활용하지 않는 원인 중 가장 큰 부분이 전문 인력의 부족과 투자의 어려움이라고 할 수 있다. 따라서 전문성이 부족한 인력도 활용할 수 있고, 원가 정보의 축적이 가능하며, 저비용으로 도입할 수 있는 사전원가관리 툴의 필요성이 있기 때문에 연구를 통해 Active Cost Table System을 개발하였다.
        4,000원
        15.
        2017.11 구독 인증기관 무료, 개인회원 유료
        글로벌 경제 침체 속에서 기업은 날로 높아져 가는 소비자들의 수요를 만족하기 위하여 납기 대응 그리고 LB(Line Balance, 라인편성효율) 향상과 제조원가의 절감을 위한 생산성 향상은 중요한 개선 항목이다. 따라서 본 연구에서는 자동차 물류 중 조달물류를 대상으로 하여 불출자의 로드밸런스율을 증대할 수 있는 휴리스틱 알고리즘 개발에 대하여 연구를 진행함으로써 1차 목표 값을 적용하였을 load balancing율은 45.6%에서 91.7%로 개선 된 것을 확인할 수 있었다.
        4,000원
        16.
        2017.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 경상남도 김해시의 유효응답자수 569명의 응답을 바탕으로 환경관련 행동을 생활환경 여건과 비교하여 환경문제에 대한 인식과 환경관련 행동에 미치는 영향을 분석하였다. 환경행동 항목별 실천정도에 대한 상관분석 결과 법률 또를 조례로 정하여 규제하고 있는 항목에 대해서는 실천정도가 높게 나타났다. 다만 환경보전의식이 낮은 사람의 경우에는 모든 항목에서 실천의지가 낮게 나타났다. 사회적 변수에 의한 환경관련 항목별 실천정도에 대한 상관분석 결과, 주거형태 측면에서는 전체적으로 공동주택보다는 단독주택 거주자의 실천의식이 높았다. 나이에 따라 서는 나이가 많아질수록 환경보전 실천의지가 강한 것으로 나타났으며, 교육수준이 높을수록 실천 강도가 낮았다. 다만 교육수준과 관련해서는 학생집단의 특수성이 반영된 것으로 판단되었다. 환경관련 의식과 실천정도에 대한 분석 결과 제도적인 대응보다는 환경의식의 개선이 필요하며, 환경관련 행동을 위한 정책은 일반화 보다는 성별, 거주유형, 교육수준 등 환경적 특성에 대한 분석을 기반으로 방법을 달리 하는 것이 필요하다.
        4,000원
        17.
        2017.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Companies are pursuing the management of small quantity batch production or JIT(Just-in-time) system for improving the delivery response and LOB(Line Balancing) in order to satisfy consumers’ increasing demands in the current global economic recession. And in order to improve the growth of production for reducing manufacturing cost, improvements of the Load Balancing have become an important reformation factor. Thus this paper is aimed at warehouse which procures materials on the assembly line in procurement logistics of automotive logistics and proceed with research on heuristic algorithm development which can increase the Load Balancing of workers. As a result of this study, when applied the primary target value, it was verified that the whole workers decreased from 28 to 24. Furthermore, when specified the secondary target value and applied algorithm once more, it was verified that the Load Balance Ratio was improved from 44.96% to 91.7%.
        4,000원
        18.
        2016.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The efficiency of the purchasing and procurement logistics is important in automotive industry. The rationalization of production system is directly impact on productivity and quality. For this reason importance of logistics is high. Despite we are continuously making effort, our country are still below the level than developed country on logistics efficiency. Rising labor costs is an important factor in increasing logistics costs. So workforce reduction in logistics department is a large part. We deal with A-company inbound logistics, especially procurement logistics in automotive logistics as research object. So in this study we do research on work load balance about workers. We do research on 1,475 kinds of components in procurement process. We applied work load balance algorithm on chassis, final, sequence, trim warehouses workers. According to number of workers and average M/H, algorithm is applied in two ways. After applied work load balance algorithm we reduced numbers of workers from 28 to 20 and improved worker load balance rate from 47.1% to 93.7%
        4,000원
        19.
        2016.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Korean automobile industrial is in a difficult situation because of more competitive global market and lower demand. Therefore, domestic as well as global automobile manufacturers are making greater efforts in cost reduction to strengthen the competitiveness. According to statistical data, logistics cost in domestic manufacturers is higher than advanced countries. In this study, we developed program to effectively manage standard time of procurement logistics, and confirm based on A-automobile factory data. For the purpose, we develop the system which is possible to manage standard time as well as calculate man-hour. Program is not just for calculating and managing standard man-hour, scenarios analysis function will be added to calculate benefit while introduce logistics automated equipment. In this study we propose scenario using AGV instead of electric motor while move component. In the scenario analysis, job constitution is changed,and then we use system to compare the result. We can confirm standard man-hour is reduced from 22.3M/H to 14.3M/H. In future research, it is necessary scenario analysis function, and develop algorithm with realistic constraint condition.
        4,000원
        20.
        2015.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        구조실험을 위한 데이터 모델은 구조실험에 관련된 실험정보를 정형화하여 표현하므로 데이터 저장소를 개발하는데 이용할 수 있다. 데이터 모델은 특히 대규모의 구조실험정보 또는 일반적인 다양한 실험정보를 위한 데이터 저장소에 효과적인데 예를 들면 NEES에서 개발한 NEEShub Project Warehouse가 있다. 본 논문은 데이터 모델의 구성과 사용을 평가하기 위한 평가요소를 제안하고 있다. 클래스의 속성이 값을 갖는지를 의미하는 AVE(attribute value existence)란 용어를 도입하여 속성의 사용성에 대한 Attribute AVE, 클래스의 사용성에 대한 Class AVE, 하위레벨에 있는 클래스를 포함하는 Class Level AVE, 하나의 프로젝트의 모든 클래스를 포함하는 Project AVE, 모든 프로젝트를 포함하는 데이터 모델에 대한 Data Model AVE를 정의하였다. 이러한 평가요소들을 NEES 데이터 모델의 프로젝트들에 적용하였는데 데이터 모델내의 클래스와 객체에 대한 사용성을 수치적으로 기술하여 평가하는 것이 가능하였다.
        4,000원
        1 2 3