Kori Unit 1, the first commercial nuclear power plant (NPP) in Korea, was permanently shut down in 2017 and was scheduled for decommissioning. Various programs must be planned early in the decommissioning process to safely decommission NPPs. Radiological characterization is a key program in decommissioning and should be a high priority. Radiological characterization involves determining the decommissioning technology to be applied to a nuclear facility by identifying the radiation sources and radioactive contaminants present within the facility and assessing the extent and nature of the radioactive contaminants to be removed from the facility. This study introduces the regulatory requirements, procedures, and implementation methods for radiological characterization and proposes a methodology to link the results of radiological characterizations for each stage. To link radiological characteristics, this study proposes to conduct radiological characterization in the decommissioning phase to verify the results of radiological characterization in the transitional phase of decommissioning NPPs. This enables significantly reducing the scope and content of radiological characterization that must be performed in the decommissioning phase and maintaining the connection with the previous phase.

Radiation workers receive exposure during radiation works such as decontamination or cutting of metals and concrete in decommissioning nuclear power plants. To reduce occupational exposure, various radiation protection measures should be prepared by estimating the exposure dose in advance. RESRAD-RECYCLE, the computer code, is generally used for estimating occupational dose due to handling metals contaminated with radioactive materials. However, RESRAD-RECYCLE used the dose conversion factors (DCF) of EPA FGR No. 11 based on ICRP Publications 30 and 48 published in the 1980s for internal exposure estimation. This study compared the DCFs of RESRAD-RECYCLE with those of the relatively recently published ICRP Publications 119 and 141. In addition, the internal exposure dose was evaluated by changing the value of the DCFs of RESRAD-RECYCLE. As a result of the comparison, ICRP Publication 119 showed that the DCF values of most nuclides were significantly lowered. On the other hand, in the case of nuclides emitting gamma rays, there was generally no significant change in the value of DCFs. In addition, in the case of 65Zn and 94Nb, the DCF increased compared to the previous ICRP publications. The exposure dose of the decommissioning workers of Hanul Units 1 and 3 and Hanbit Unit 4 was also calculated in this study. The expected radioactivity concentration of the steam generator chamber of each unit was used as the source term. The concentration of metal dust in the air generated during cutting was calculated and applied to evaluate the internal exposure dose. As a result of the dose evaluation, there was a difference in exposure dose up to 0.2 mSv in the scrap cutter scenario of Hanbit Unit 4, which generated a lot of dust and had a high radioactivity concentration. On the other hand, in the case of the slag worker, there was no difference in the dose because the working time was very short, and the inhalation of metal dust was small, even if the latest DCF was applied.