The Spectro-Photometer for the History of the Universe, Epoch of Reionization and Ices Explorer (SPHEREx) will provide all-sky spectral survey data covering optical to mid-infrared wavelengths with a spatial resolution of 6.′′2, which can be widely used to study galaxy formation and evolution. We investigate the galaxy-galaxy blending in SPHEREx datasets using the mock galaxy catalogs generated from cosmological simulations and observational data. Only ∼0.7% of the galaxies will be blended with other galaxies in all-sky survey data with a limiting magnitude of 19 AB mag. However, the fraction of blended galaxies dramatically increases to ∼7–9% in the deep survey area around the ecliptic poles, where the depth reaches ∼22 AB mag. We examine the impact of the blending in the number count and luminosity function analyses using the SPHEREx data. We find that the number count can be overestimated by up to 10–20% in the deep regions due to the flux boosting, suggesting that the impact of galaxy-galaxy blending on the number count is moderate. However, galaxy-galaxy blending can marginally change the luminosity function by up to 50% over a wide range of redshifts. As we only employ the magnitude limit at Ks-band for the source detection, the blending fractions determined in this study should be regarded as lower limits.

본 연구에서는 영종도에 위치한 인천과학고등학교 주변에 서식하는 개미와 개미집 근권토양을 두 차례에 걸쳐 채취한 것을 활용하여 토양미생물 순수분리 및 동정을 진행하였다. 채취된 개미의 더듬이의 모양, 털의 위치 및 분포 등의 형태학적 동정 및 DNA extraction을 통한 분자생물학적 동정을 통하여 채취한 개미를 Camponotus japonicus으로 결론하였다. 토양미생물을 연속희석법을 이용하여 확인한 결과 채취한 개미집 세 곳에서 각각 12, 18, 10개의 종이 동정되었다. 개미집 근권토양의 비옥도가 상대적으로 높다는 선행연구를 바탕 으로 ‘분리한 토양미생물이 다양한 유기물 분해 효소활성을 보일 것’이라는 가설을 세웠고, 이를 확인하기 위해 분별배지를 제작하여 디스크 확산법을 진행하였다. 실험 결과 개미집 근권 토양에서 분리된 균주가 일반 토양에 서 분리된 균주에 비해 높은 효소활성을 보임을 확인하였으며 개미집 근권 토양 미생물의 불용성인산 가용화능 이 우수함을 확인하였다. 이후 위 실험들을 바탕으로 개미집 근권 토양 미생물이 식물 생장을 촉진시켜 미생물을 접종한 토양에서의 식물의 건조 질량이 증가하였음을 확인하였다.

목적 : 본 연구의 목표는 서울지역 20대 MZ세대 집단이 인식하는 해외 안경테 브랜드 국가의 감성의미를 도출 하는 것이다. 방법 : 먼저 연구 대상으로 이탈리아, 프랑스, 미국, 일본 4개국을 선정하였다. 의미분별법을 이용하여 감성어 휘 8개를 추출한 다음, 설문조사와 통계처리를 통하여 각각의 국가별로 해당되는 감성어휘를 결정하였고, 해외 안 경테 브랜드 국가에 대한 선호도 조사를 추가로 실시하였다. 결과 : 이탈리아, 프랑스, 미국, 일본의 4가지 해외 안경테 브랜드 국가들에 대하여 각각 고급스러움, 매력적 임, 실용적임, 동양적임이라는 감성어휘를 가장 많이 선택하였다. 안경테에 대한 선호도 순위는 이탈리아, 프랑스, 미국, 일본 순으로 나타났다. 결론 : 도출된 감성어휘들과 응답자들의 선호도를 분석했을 때, 고급스러움과 디자인적 측면을 중시하는 MZ세 대의 플렉스 소비 성향에는 이탈리아와 프랑스 브랜드의 안경테가 가정 적합한 것으로 여겨진다.

There are many types of foam molding methods. The most commonly used methods are the pressure foaming method, in which foam resin is mixed with a foaming agent at high temperature and high pressure, and the normal pressure foaming method, which foams at high temperature without pressure. The polymer resins used for foaming have different viscosities. For foaming under normal pressure, they need to be designed and analyzed for optimal foaming conditions, to obtain resins with low melt-viscosity or a narrow optimal viscosity range. This study investigated how changes in viscosity, molding temperature, and cross-link foaming conditions affected the characteristics of the molded foam, prepared by blending rubber polymer with biodegradable resin. The morphologies of cross sections and the cell structures of the normal pressure foam were investigated by SEM analysis. Properties were also studied according to cross-link/foaming conditions and torque. Also, the correlation between foaming characteristics was studied by analyzing tensile strength and elongation, which are mechanical properties of foaming composites.

In this study, we have fabricated the phenolic resin (PR)/polyacrylonitrile (PAN) blend-derived core-sheath nanostructured carbon nanofibers (CNFs) via one-pot solution electrospinning. The obtained core-sheath nanostructured carbon nanofibers were further treated by mixed salt activation process to develop the activated porous CNFs (CNF-A). Compared to pure PAN-based CNFs, the activated PR/PAN blend with PR 20% (CNF28-A)-derived core-sheath nanostructured CNFs showed enhanced specific capacitance of ~ 223 F g− 1 under a three-electrode configuration. Besides, the assembled symmetric CNF28-A//CNF28-A device possessed a specific capacitance of 76.7 F g− 1 at a current density of 1 A g− 1 and exhibited good stability of 111% after 5,000 galvanostatic charge/discharge (GCD) cycles, which verifies the outstanding long-term cycle stability of the device. Moreover, the fabricated supercapacitor device delivered an energy density of 8.63 Wh kg− 1 at a power density of 450 W kg− 1.

Natural uranium-contaminated soil in Korea Atomic Energy Research Institute (KAERI) was generated by decommissioning of the natural uranium conversion facility in 2010. Some of the contaminated soil was expected to be clearance level, however the disposal cost burden is increasing because it is not classified in advance. In this study, pre-classification method is presented according to the ratio of naturally occurring radioactive material (NORM) and contaminated uranium in the soil. To verify the validity of the method, the verification of the uranium radioactivity concentration estimation method through γ-ray analysis results corrected by self-absorption using MCNP6.2, and the validity of the pre-classification method according to the net peak area ratio were evaluated. Estimating concentration for 238U and 235U with γ-ray analysis using HPGe (GC3018) and MCNP6.2 was verified by 􀟙-spectrometry. The analysis results of different methods were within the deviation range. Clearance screening factors (CSFs) were derived through MCNP6.2, and net peak area ratio were calculated at 295.21 keV, 351.92 keV(214Pb), 609.31 keV, 1120.28 keV, 1764.49 keV(214Bi) of to the 92.59 keV. CSFs for contaminated soil and natural soil were compared with U/Pb ratio. CSFs and radioactivity concentrations were measured, and the deviation from the 60 minute measurement results was compared in natural soil. Pre-classification is possible using by CSFs measured for more than 5 minutes to the average concentration of 214Pb or 214Bi in contaminated soil. In this study, the pre-classification method of clearance determination in contaminated soil was evaluated, and it was relatively accurate in a shorter measurement time than the method using the concentrations. This method is expected to be used as a simple pre-classification method through additional research.

Level measurement of liquid radwaste is essential for inventory management of treatment system. Among various methods, level measurement based on differential pressure has many advantages. First, it is possible to measure the liquid level of the system regardless of liquid type. Second, as the instrument doesn’t need to be installed near the tank, there is no need to contact the tank when managing it. Therefore, workers’ radiation dose from the system can be decreased. Finally, although it depends on the accuracy, the price of the instrument is relatively low. With these advantages, in general, liquid radwaste level in a tank is measured using differential pressure in the treatment system. Not only the advantages described above, there are some disadvantages. As the liquid in the system is waste, it is not pure but has some suspended materials. These materials can be accumulated in tanks and pipes where the liquids move to come into direct contact with pneumatic pipes that are essential in differential pressure instruments. As a result, in case of a treatment using heat source, the accumulated materials may become sludge causing interference in pneumatic pipes. And this can change the pressure which also affects the level measured. In conclusion, in case of liquid storage tanks in which the situation cannot be checked, the proficiency of an operator becomes important.

Molten Salt Reactor (MSR) is one of Generation-IV nuclear reactors that uses molten salts as a fuel and coolant in liquid forms at high temperatures. The advantages of MSR, such as safety, economic feasibility, and scalability, are attributed from the fact that the molten salt fuel in a liquid state is chemically stable and has excellent thermo-physical properties. MSR combines the fuel and coolant by dissolving the actinides (U, Th, TRU, etc.) in the molten salt coolant, eliminating the possibility of a core meltdown accident due to loss of coolant (LOCA). Even if the molten salt fuel leaks, the radioactive fission products dissolved in the molten salt will solidify with the fuel salt at room temperature, preventing potential leakage to the outside. MSR was first demonstrated at ORNL starting with the Aircraft Reactor Experiment (ARE) in 1954 and was extended to the 7.4 MWth MSRE developed in 1964 and operated for 5 years. Recently, various start-ups, including TerraPower, Terrestrial Energy, Moltex Energy, and Seaborg, have been conducting research and development on various types of MSR, particularly focusing on its inherent safety and simplicity. While in the past, fluoride-based molten salt fuels were used for thermal neutron reactors, recently, a chlorine-based molten salt fuel with a relatively high solubility for actinides and advantageous for the transmutation of spent nuclear fuel and online reprocessing has been developing for fast neutron spectrum MSRs. This paper describes the development status of the process and equipment for producing highpurity UCl3, a fuel material for the chlorine-based molten salt fuel, and the development status of the gas fission product capturing technologies to remove the gaseous fission products generated during MSR operation. In addition, the results of the corrosion property evaluation of structural materials using a natural circulation molten salt loop will also be included.

Melons, a rich source of vitamins and fibers, are commonly grown in the soil. Hydroponic cultivation could improve yield and quality of melon and selection of substrate volume and the kind of substrates is important for hydroponic cultivation of melons. This study investigated the effect on melon growth according to volume of granular rockwool and substrates of coir and rockwool slab. ‘Geumsegye’ melon (Cucumis melo L. cv. Geumsegye) was cultivated hydroponically according to volume of granular rockwool to 1.0, 1.5, 2.0, 3.0, and 4.0 L, and was also cultivated using coir and rockwool slabs. Logistic model was applied to estimate the growth characteristics of melons such as plant height, leaf length, leaf width, and the characteristics of fruit. The growth characteristics of melons were significantly increased at 4.0 L compared to those grown of 1.0 L volume of on granular rockwool, and the results were the highest in coir and rockwool slabs. Melons grown in rockwool slabs showed the largest fruit fresh weight, fruit length, and fruit width. During hydroponic cultivation, growth characteristics of melon appropriate at the 4.0 L volume of granular rockwool, and the highest at coir and rockwool slabs. This study provides a basis for understanding the effect of root zone environment to the growth characteristics and fruit quality of non-netted melon.

Subunit vaccines are being developed as a potential therapy for preventing microbial pathogen infection. In this study, the immunogenicity of recombinant Brucella (B.) abortus Fe/Mn superoxide dismutase (rFe/Mn SOD) protein as a subunit vaccine against B. abortus was investigated in BALB/c mice model. Brucella Fe/Mn SOD gene was cloned into a pcold-TF DNA vector. The bacterial recombinant protein was expressed using the Escherichia coli DH5α strain with a size of 82.50 kDa. The western blotting assay showed that rFe/Mn SOD reacted with Brucella-positive serum, indicating the potential immunoreactivity of this recombinant protein. After the second and third vaccinations, the peripheral CD4+ T cell population was increased significantly in the rFe/Mn SOD-immunized mice group compared to the PBS control group. Moreover, immunization of this recombinant protein increased the CD4+ T cell population from the first vaccination to the third vaccination. Meanwhile, the CD8+ T cells were slightly enhanced after the second vaccination compared to the first vaccination and compared to control groups. Fourteen days after the bacterial infection, the splenomegaly and the number of bacteria in the spleen were evaluated. The result showed that both rFe/Mn SOD and positive control RB51 decreased the bacterial replication in the spleen and the splenomegaly compared to control groups. Altogether, these results suggested that rFe/Mn SOD could induce host immunity against B. abortus infection.

Following the previous study, the toxicity of a single subcutaneous administration of the Thyrokitty injection (I-131) and the side effects that may occur at therapeutic doses were confirmed. The Thyrokitty injection (I-131) was administered subcutaneously once at a dose of 0, 2.0, 6.0, and 18.0 mCi/kg, 5 male and female rats per group, and mortality, general symptom observation, and weight measurement were performed for 2 weeks, followed by observation of autopsy findings. There were no deaths, and no statistically significant weight change was observed. Mild hair loss, fissures, and crusting were observed by general symptom observation, but it was not a toxic change related to the Thyrokitty injection (I-131). Gastric atrophy and a decrease in the size of the spleen were observed by the autopsy. As a results of single subcutaneous administration of the Thyrokitty Injection (I-131) to rats at a maximum dose of 18.0 mCi/kg, a decrease in the size of the spleen and gastric atrophy were observed as the dose of the Thyrokitty Injection (I-131) increased, which may be related to the test substance. No abnormal findings related to the Thyrokitty injection (I-131) were observed. Therefore, the approximate lethal dose of the Thyrokitty injection (I-131) was 18.0 mCi/kg or more. In addition, as reported for the treatment of feline hyperthyroidism with radioiodine (131I), side effects of the Thyrokitty injection (I-131) are expected to be extremely rare. Temporary dysphagia and fever may occur, but it will recover naturally. It should be administered with caution in cats with diseases such as urinary system, cardiovascular system, gastrointestinal system and endocrine system, especially with kidney disease. And it should not be used in cats who are pregnant, lactating, or likely. It is expected that the Thyrokitty injection (I-131) can be used for clinical treatment in Korea as a veterinary drug.

Radioiodine (131I) has been used for the treatment of feline hyperthyroidism since the 1990s in the USA and Europe, and it is recommended as the most effective treatment for feline hyperthyroidism because it has a high therapeutic effect, small side effects, and does not require anesthesia. In this study, the pharmacological properties of the Thyrokitty injection (I-131), which is being developed as a treatment for feline hyperthyroidism, using radioiodine (131I) as an active ingredient, was tested. The %cell uptake of the Thyrokitty injection (I-131) in FRTL- 5 thyroid cells was 0.410 ± 0.016%, which was about 18 times higher compared to Clone 9 hepatocytes, and it was decreased by 30.7% due to the competitive reaction with iodine (sodium iodide). In addition, the %cell growth of the FRTL-5 thyroid cells was reduced by 25.0% by treatment with the Thyrokitty injection (I-131). As a result of the tissue distribution test, the Thyrokitty injection (I-131) was distributed at the highest concentration at 0.083 hours (5 minutes) after subcutaneous administration to animals in most organs except the stomach, small intestine, large intestine, muscle and thyroid gland, and it was excreted mainly through the kidneys. The stomach and thyroid gland showed a typical distribution pattern observed when radioiodine (131I) was administered. In addition, about 78.45% of the total amount of excretion was excreted within 48 hours, of which more than 85% was excreted in urine. In conclusion, the Thyrokitty injection (I-131) has the same mechanism of action, potency, absorption, distribution, metabolism and excretion characteristics as radioiodine (131I) reported in connection with the treatment of feline hyperthyroidism. In the future, using the results of this study, it is expected that the Thyrokitty (I-131) could be safely used in the clinical treatment of feline hyperthyroidism.

PURPOSES : The aim of this study is to evaluate the stripping resistance of a bead coating via the Hamburg wheel tracking test and image analysis. METHODS : First, the stripping resistance of the bead coating was evaluated via the Hamburg wheel tracking test. A pneumatic wheel with a load of 175±2 N was used to simulate repeated skid cycles. Several bead coating mixtures with different numbers of coating layers, i.e., zero, one, two, three, and four layers, i.e., zero, one, two, three, and four layers,were conducted. Finally, an image analysis program was developed to analyze surface images captured from the Hamburg wheel tracking test. RESULTS : The results show that the samples with more coating layers exhibit higher stripping resistance. After 500 stripping cycles, the percentage of bead loss is 4% to 28%. At 80% bead loss, the mixture with one coating layer presents more skid cycles than the control sample without a coating layer. CONCLUSIONS : Incorporating a coating layer can improve the stripping resistance of glass beads under repeated skid cycles. Additionally, an image analysis program is established in this study to determine the percentage of bead loss caused by the stripping test.