This study used optical and scanning electron microscopy to analyze the surface oxidation phenomenon that accompanies a γ'-precipitate free zone in a directional solidified CM247LC high temperature creep specimen. Surface oxidation occurs on nickel-based superalloy gas turbine blades due to high temperature during use. Among the superalloy components, Al and Cr are greatly affected by diffusion and movement, and Al is a major component of the surface oxidation products. This out-diffusion of Al was accompanied by γ' (Ni3Al) deficiency in the matrix, and formed a γ'-precipitate free zone at the boundary of the surface oxide layer. Among the components of CM247LC, Cr and Al related to surface oxidation consist of 8 % and 5.6 %, respectively. When Al, the main component of the γ' precipitation phase, diffused out to the surface, a high content of Cr was observed in these PFZs. This is because the PFZ is made of a high Cr γ phase. Surface oxidation of DS CM247LC was observed in high temperature creep specimens, and γ'-rafting occurred due to stress applied to the creep specimens. However, the stress states applied to the grip and gauge length of the creep specimen were different, and accordingly, different γ'-rafting patterns were observed. Such surface oxidation and PFZ and γ'-rafting are shown to affect CM247LC creep lifetime. Mapping the microstructure and composition of major components such as Al and Cr and their role in surface oxidation, revealed in this study, will be utilized in the development of alloys to improve creep life.

High-temperature oxidation of a Ni-based superalloy was analyzed with samples taken from gas turbine blades, where the samples were heat-treated and thermally exposed. The effect of Cr/Ti/Al elements in the alloy on high temperature oxidation was investigated using an optical microscope, SEM/EDS, and TEM. A high-Cr/high-Ti oxide layer was formed on the blade surface under the heat-treated state considered to be the initial stage of high-temperature oxidation. In addition, a PFZ (γ’ precipitate free zone) accompanied by Cr carbide of Cr23C6 and high Cr-Co phase as a kind of TCP precipitation was formed under the surface layer. Pits of several μm depth containing high-Al content oxide was observed at the boundary between the oxide layer and PFZ. However, high temperature oxidation formed on the thermally exposed blade surface consisted of the following steps: ① Ti-oxide formation in the center of the oxide layer, ② Cr-oxide formation surrounding the inner oxide layer, and ③ Al-oxide formation in the pits directly under the Cr oxide layer. It is estimated that the Cr content of Ni-based superalloys improves the oxidation resistance of the alloy by forming dense oxide layer, but produced the σ or μ phase of TCP precipitation with the high-Cr component resulting in material brittleness.

Diabetic encephalopathy is a major complication with cognitive impairment and neurodegeneration in patients with type 1 or type 2 diabetes mellitus (DM). DM-induced glucolipotoxicity is a risk factor for Alzheimer’s disease–like phenotype, including amyloidogenesis, tau hyperphosphorylation, and neuronal apoptosis. Although the detailed mechanism underlying the pathogenesis of diabetic encephalopathy remains unclear, mitochondrial oxidative stress is emerging as a key factor for diabetic complications and neurodegeneration. A deeper understanding of the regulatory mechanism of mitochondrial oxidative stress under hyperglycemic conditions will provide insights into the development of therapeutic strategies for diabetic encephalopathy. Here, we review the role of mitochondrial oxidative stress in diabetic encephalopathy and the regulatory mechanisms by which high glucose induces the generation of mitochondrial reactive species oxygen species in neuronal cells. This review also summarizes the mitochondrial-dependent and -independent pathways (O-linked-N-acetylglucosaminylation, calcium, and glycogen synthase kinase 3β signaling) that regulate mitochondrial oxidative stress in a DM model.

본 연구는 환경측정용 센서 위치에 따른 온실 환경의 공간· 수직적 특성을 조사하고 온실 종류에 따른 온도, 광도 및 CO2 농도 간의 상관관계를 구명하고자 수행하였다. 벤로형 온실의 공간적인 5지점을 선정한 후 각 지점에서 대표적 작물의 수 직적 높이 4지점과 지면부, 지붕 공간에 온도, 상대습도, CO2, 엽온 및 광센서를 설치하였다. 벤로형 온실과 반밀폐형 온실 에서 온도, 광도 및 CO2 농도 변화의 관계성을 Curve Expert Professional 프로그램을 이용하여 비교하였다. 벤로형 온실 의 공간적 위치에 따른 편차는 CO2 농도가 다른 요인보다 큰 것으로 나타났다. CO2 농도는 평균 465－761μmol·mol-1 범 위였고, 편차가 가장 큰 시간대는 오후 5시였으며, 최고 농도 는 액화 탄산가스 공급장치의 메인 배관(50∅)과 가까운 위치 인 중앙 후부(Middle End, 4ME)에서 646μmol·mol-1, 최저 농도는 좌측 중앙(Left Middle, 5LM)에서 436μmol·mol-1이 었다. 수직적 위치에 따른 편차는 온도와 상대습도가 다른 요 인보다 큰 것으로 나타났다. 평균 기온의 편차가 가장 큰 시간 대는 오후 2시대이며, 최고 기온은 작물 위 공기층(Upper Air, UA)에서 26.51℃, 최저 기온은 작물의 하단부(Lower Canopy, LC)에서 25.62℃였다. 평균 상대습도의 편차가 가장 큰 시간 대는 오후 1시대로 나타났으며, 최고 습도는 LC에서 76.90%, 최저 습도는 UA에서 71.74%이다. 각 시간대에 평균 CO2 농 도가 가장 높은 수직적 위치는 지붕 공간 공기층(Roof Air, RF)과 시설 내 지면(Ground, GD)이었다. 온실 내 온도, 광도 및 CO2 농도의 관계성은 반밀폐형 온실의 경우 결정계수(r2) 가 0.07, 벤로형 온실은 0.66이었다. 결과를 종합하여 볼 때, 온실 내 CO2 농도는 공간적 분포, 온도와 습도는 작물의 수직 적 분포 차이를 측정하여 분석할 필요가 있고 환기율이 낮은 반밀폐형 온실의 경우 목표 CO2 시비 농도가 일반 온실과 다 르게 설정해야 할 것으로 판단된다.

본 연구는 데이터를 기반으로 한 인공지능 기계학습 기법을 활용하여 온실 내부온도 예측 시뮬레이션 모델을 개발을 수행 하였다. 온실 시스템의 내부온도 예측을 위해서 다양한 방법 이 연구됐지만, 가외 변인으로 인하여 기존 시뮬레이션 분석 방법은 낮은 정밀도의 문제점을 지니고 있다. 이러한 한계점 을 극복하기 위하여 최근 개발되고 있는 데이터 기반의 기계 학습을 활용하여 온실 내부온도 예측 모델 개발을 수행하였 다. 기계학습모델은 데이터 수집, 특성 분석, 학습을 통하여 개 발되며 매개변수와 학습방법에 따라 모델의 정확도가 크게 변 화된다. 따라서 데이터 특성에 따른 최적의 모델 도출방법이 필요하다. 모델 개발 결과 숨은층 증가에 따라 모델 정확도가 상승하였으며 최종적으로 GRU 알고리즘과 숨은층 6에서 r2 0.9848과 RMSE 0.5857℃로 최적 모델이 도출되었다. 본 연 구를 통하여 온실 외부 데이터를 활용하여 온실 내부온도 예 측 모델 개발이 가능함을 검증하였으며, 추후 다양한 온실데이 터에 적용 및 비교분석이 수행되어야 한다. 이후 한 단계 더 나아 가 기계학습모델 예측(predicted) 결과를 예보(forecasting)단 계로 개선하기 위해서 데이터 시간 길이(sequence length)에 따른 특성 분석 및 계절별 기후변화와 작물에 따른 사례별로 개발 모델을 관리하는 등의 다양한 추가 연구가 수행되어야 한다.

In this study, defects generated in the YSZ coating layer of the IN738LC turbine blade are investigated using an optical microscope and SEM/EDS. The blade YSZ coating layer is composed of a Y-Zr component top coat layer and a Co component bond coat layer. A large amount of Cr/Ni component that diffused from the base is also measured in the bond coat. The blade hot corrosion is concentrated on the surface of the concave part, accompanied by separation of the coating layer due to the concentration of combustion gas collisions here. In the top coating layer of the blade, cracks occur in the vertical and horizontal directions, along with pits in the top coating layer. Combustion gas components such as Na and S are contained inside the pits and cracks, so it is considered that the pits/cracks are caused by the corrosion of the combustion gases. Also, a thermally grown oxide (TGO) layer of several μm thick composed of Al oxide is observed between the top coat and the bond coat, and a similar inner TGO with a thickness of several μm is also observed between the bond coat and the matrix. A PFZ (precipitate free zone) deficient in γ' (Ni3Al) forms as a band around the TGO, in which the Al component is integrated. Although TGO can resist high temperature corrosion of the top coat, it should also be considered that if its shape is irregular and contains pore defects, it may degrade the blade high temperature creep properties. Compositional and microstructural analysis results for hightemperature corrosion and TGO defects in the blade coating layer used at high temperatures are expected to be applied to sound YSZ coating and blade design technology.

Microbiologically Influenced Corrosion (MIC) occurring in underground buried pipes of API 5L X65 steel was investigated. MIC is a corrosion phenomenon caused by microorganisms in soil; it affects steel materials in wet atmosphere. The microstructure and mechanical properties resulting from MIC were analyzed by OM, SEM/EDS, and mapping. Corrosion of pipe cross section was composed of ① surface film, ② iron oxide, and ③ surface/internal microbial corrosive by-product similar to surface corrosion pattern. The surface film is an area where concentrations of C/O components are on average 65 %/ 16 %; the main components of Fe Oxide were measured and found to be 48Fe-42O. The MIC area is divided into surface and inner areas, where high concentrations of N of 6 %/5 % are detected, respectively, in addition to the C/O component. The high concentration of C/O components observed on pipe surfaces and cross sections is considered to be MIC due to the various bacteria present. It is assumed that this is related to the heat-shrinkable sheet, which is a corrosion-resistant coating layer that becomes the MIC by-product component. The MIC generated on the pipe surface and cross section is inferred to have a high concentration of N components. High concentrations of N components occur frequently on surface and inner regions; these regions were investigated and Na/Mg/Ca basic substances were found to have accumulated as well. Therefore, it is presumed that the corrosion of buried pipes is due to the MIC of the NRB (nitrate reducing bacteria) reaction in the soil.

Colorectal cancer causes the most cancer-associated death worldwide, having a high cancer incidence. Pectin is a complex polysaccharide present in various fruits, emerging as an anti-carcinogenic candidate. Although pectin has a suppressive capacity for colon carcinogenesis, the effect of reactive oxygen species (ROS) generation and colonic aberrant foci formation in the colon carcinogenesis mouse model remains unclear. Therefore, this study investigates the regulatory effect of pectin supplementation on colon carcinogenesis induced by azoxymethane (AOM) and dextran sodium sulfate (DSS) in mice. In an animal experiment, thirty male institute for cancer research (ICR) mice were divided into two experimental groups; AOM/DSS (control group) and AOM/DSS + pectin (5% in drinking water). Furthermore, the number of aberrant crypt foci (ACF) and aberrant crypt (AC) on colonic mucosa were counted, and thiobarbituric acid-reactive substances (TBARS) assay was performed to estimate lipid peroxidation in feces. Pectin treatment significantly decreased the number of ACF and AC per colon compared with the control. Additionally, fecal TBARS level in the pectin group was significantly lower than those in the control group. Conclusively, these findings indicate that pectin-inhibited hyperplastic alteration and oxidative stress suppress colitis-associated colon carcinogenesis.

본 연구에서는 단면설계 및 열 교환 장치 위치 변경을 통해 온실의 구조 변경을 진행하였으며, 선행연구를 통해 개발된 모델을 근간으로 하여 개선 여부에 따른 온실 내부 환경을 예측하였다. 단면형상과 열 교환 장치의 개선 후 유속 변화에 따른 시뮬레이션 분석을 진행하였으며, 이 때 온도와 균일도는 각각 평균 0.65°C, 0.75%p 상승함을 확인하였다. 해석대상 온실과 같은 소규모 온실의 경우 방열관의 난방성능 개선보다 FCU에 의해 형성되는 공기 유동이 균일한 환경 조성에 더 큰 영향을 미치는 것으로 판단된다. 개선 전 ‧ 후 온실에 환기시스템 적용 시 공기 유동 특성 분석을 위해 시뮬레이션 분석을 진행하였다. 공기 유동과 공기령은 유사한 분포를 보였으며, 개선 후 온실의 공기령이 개선 전 온실 대비 18초 낮게 나타났다. 개선 전 ‧ 후 온실 시뮬레이션 분석 결과 전체적으로 개선된 온실에서의 평균온도 및 온도 균일도 상승, 최대편차 감소 등 내부 환경의 균일성이 향상됨을 확인하였다. 선행연구로 개발 된 모델은 형상 변경, 열 교환 장치 위치 변경 등에 따라 변화하는 온실 내부 환경을 예측할 수 있음을 확인하였으며, 온실 설계, 온실 내 난방시스템 설계 등의 분야에 적용 가능할 것으로 판단된다.

This study identified single nucleotide polymorphisms (SNPs) that affect the body weight of chickens. Analysis of body weight showed that the Cornish breed had the highest body weight, and the Korean native chicken (Gray Brown) had the lowest body weight. TSH is composed of an α-subunit and a β-subunit, and the TSH-β gene encoding the β-subunit has been reported to be associated with obesity. In chickens, it is located on chromosome 26 and is reported to be associated with growth. The calcium-sensing receptor gene (CaSR) plays a role in the regulation of extracellular calcium homeostasis and is responsible for calcium absorption in the urinary tract, which affects the eggshell quality in poultry. It was shown that TSH-β was strongly correlated with weight in Cornish and Korean native (Gray Brown) chickens, particularly in those with the CC trait. However, CaSR showed no association with body weight in poultry; it was associated with calcium and the eggshell. Thus, selection for TSH-β can be used to produce individuals with more favorable traits in terms of body weight.

The effect of solidification rate on micro-segregation in investment casting of IN738LC superalloy was studied. In Ni-based superalloys, the micro-segregation of solute atoms is formed due to limited diffusion during cast and solidification. The microstructure of cast Ni-based superalloys is largely divided into dendrite core of initial solidification and interdendrite of final solidification. In particular, mosaic shaped eutectic γ/γ’ and carbides are formed in the interdendrite of the final solidification region in some cases. The micro-segregation phenomena formed in regions of dendrite core and interdendrite including eutectic γ/γ’ and carbides were analyzed using OM, SEM/EDS and micro Vickers hardness. As a result of analysis, the lack of (Cr, W) and the accumulation of Ti were measured in the eutectic γ/γ’, and the accumulation of (Cr, Mo) and the lack of Ti were measured in the interdendrite between dendrite and eutectic. Carbides formed in interdendritic region were composed of (Ti, W, Mo, C). The segregation applied to each microstructure is mainly due to the formation of γ’ with Ni3(Al,Ti) composition. The Ni accumulation accompanied by Cr depletion, and the Ti accumulated in the eutectic region as a γ’ forming elements. The Mo tends to diffuse out from the dendrite core to the interdendrite, and the W diffuse out from the interdendrite to the dendrite core. Therefore, the accumulation of Mo in the interdendrite and the deficiency of W occur in the eutectic region located in the interdendrite. Heat treatment makes the degree of the micro-segregation decrease due to the diffusion during solid solution. This study could be applied to the heat treatment technology for the micro-segregation control in cast Ni-based superalloys.

In recent years, various methods of measuring body temperature have been developed using wireless biosensors to facilitate an early detection of pregnancy and parturition in cows. However, there are no studies on real-time monitoring of cattle body temperature throughout pregnancy. Therefore, we investigated the daily mean ruminal temperature in pregnant cows throughout pregnancy using a ruminal bio-capsule sensor and then evaluated the temperature variation between pregnant and non-pregnant cows. In pregnant cows, the mean and standard deviation of ruminal temperature was 38.86 ± 0.17℃. Ruminal temperature in pregnant cows slowly decreased until 180 to 190 days after artificial insemination and after that, the temperature increased dramatically until just before parturition. Furthermore, the means ruminal temperature was significantly different between pregnant and nonpregnant cows. The mean and standard deviation of ruminal temperature were as follows: 38.68 ± 0.01℃ from days 80 to 100, 38.78 ± 0.02℃ from days 145 to 165, 38.99 ± 0.45℃ from days 200 to 220, 39.14 ± 0.38℃ from days 250 to 270 before parturition. Therefore, our results could provide useful data for early detection of pregnancy and parturition in Korean cows.

Because the inner environment of greenhouse has a direct impact on crop production, many studies have been performed to develop technologies for controlling the environment in the greenhouse. However, it is difficult to apply the technology developed to all greenhouses because those studies were conducted through empirical experiments in specific greenhouses. It takes a lot of time and cost to develop the models that can be applicable to all greenhouse in real situation. Therefore studies are underway to solve this problem using computer-based simulation techniques. In this study, a model was developed to predict the inner environment of glass greenhouse using CFD simulation method. The developed model was validated using primary and secondary heating experiment and daytime greenhouse inner temperature data. As a result of comparing the measured and predicted value, the mean temperature and uniformity were 2.62°C and 2.92%p higher in the predicted value, respectively. R2 was 0.9628, confirming that the measured and the predicted values showed similar tendency. In the future, the model needs to improve by applying the shape of the greenhouse and the position of the inner heat exchanger for efficient thermal energy management of the greenhouse.

The purpose of this study was to investigate the effect of dietary addition of pegmatite for Hanwoo steers on the carcass characteristics. Based upon the findings yielded by the research referenced above, the results may be summed up as follows : Oleic acid was for the most part, higher as T2 plots (45.40%) and T3 plots (44.20%) compared with Con. plots (42.50%). As well, this study has shown that the treatment plots in unsaturated fatty acid (UFA), monounsaturated fatty acid (MUFA) and polyunsaturated fatty acid (PUFA) were largely higher than that of Con. plots, and of them all, T2 plots were highest. As for the melting point of fat, T2 plots (29℃) were largely lower than that of Con. plots (31.9℃). This study has shown that the treatment plots were significant higher as the content of total essential amino acid and total amino acid and inosine monophosphate in the nucleotide compound for the Hanwoo beef was treatment plots when compared with Con. plots.

이상 고수온을 감지하기 위한 생물모니터링 시스템(BMS) 연구를 위해, 4단계의 수온(5, 10, 20와 30℃)에서 참굴 패각운동을 측정하였다. 모든 참굴은 실험시작 전에 3일 동안 절식을 통하여, 먹이섭이 및 배출에 따른 패각운동의 요인을 제거하였다. 5℃ 실험구에서는 패각운동이 관찰되지 않았지만, 수온의 증가와 함께 패각운동은 증가하였다(10℃ : 6.31±2.18 times/hr, 20℃ : 22.0±10.0 times/hr). 30℃에서는 5℃와 같이 패각운동이 전혀 보이지 않았던 실험구와 20℃와 유사한 패각운동이 실험구가 나타났다. 이는 30℃ 이상에서도 20℃와 같은 신진대사를 보이는 개체군이 있었으나, 대부분이 신진대사의 활력의 감소에 기인하여 폐각상태가 지속되는 것으로 나타났다. 따라서 참굴 양식장에 고수온 감지를 위한 참굴 패각운동 BMS를 설치한다면, 경계단계는 빠른 패각운동(약 30.0회/hr 이상)일 때, 심각단계는 수시간 이상 폐각상태일 때, 조기경보(early warning)를 내릴 수 있을 것이다. 따라서 참굴 패각운동을 활용한 BMS는 이상고수온의 조기경보에 대하여 효과적으로 활용이 가능할 것으로 판단된다.

본 연구는 ‘상주둥시’ 감을 3개월동안 -1, 0.5, 3oC에 저장하면서 감 과실의 과실품질 변화와 저장장해 증상에 미치는 영향을 구명하고자 실시하였다. 저장온도에 따른 감 과실의 에틸렌 발생량은 저장온도가 낮을수록 그 발생량이 낮았으나 호흡율은 영향을 받지 않았다. 과실의 경도는 모든 처리구들에서 저장기간이 길어지면서 감소하였고 저장온도가 높을수록 과실 경도의 저하는 더 빠르게 진행되었다. 또한 저장기간이 길어지고 저장온도가 높을 수록 과실의 연화가 급속히 진행되었다. 과실의 감모율도 저장온도가 높을수록 증가하였고, 가용성 고형물 함량도 저장온도가 낮을수록 더 높게 유지되었다. 감 과실의 과정부와 과실측면의 과피색 L*, a*, b* 값의 변화는 저장온도 -1oC와 0.5oC에서는 저장기간에 따른 차이를 거의 보이지 않았으나, 3oC처리구에서는 과피색의 변화가 현저히 적었다. 저장중 발생하는 생리장해증상인 과피흑변, 과실연화 및 부패정도는 온도가 높을수록 그 증상이 심하게 발생하여 과실품질이 현저히 감소하였다.

The insecticidal activities of materialsderived from Dryopteris crassirhizoma Nakai against third instar larvae of three species mosquitoes (Culex pipiens, Aedes albopictus and Anopheles sinnensis) were evaluated using a direct contact mortality bioassay. The methanol extracts of D. crassirhizoma showed 100%, 87.8% and 100% larvicidal activity at 1,000 ppm against Cx. pipiens, Ae. albopictus and An. sinensis, respectively. Hexane fraction showed 100% larvicidal activity three species mosquitoes at 500 ppm after 24 hrs. Purification of the biologically active constituents from the hexane extraction with larvicidal activity was done using silica gel column chromatography. H1 and H3 fractions gave 100% mortality to Cx. pipiens, Ae. albopictus and An. sinensis at 100 ppm. H1 fraction separated with methanol to give a H111 through centrifugation. Fraction of the biologically active constituents from the H3 fraction with larvicidal activity was done using methanol. H31 fraction was determined 100% mortality to Cx. Pipiens, Ae. albopictus and An. sinensis at 50 ppm, respectively. Two fractions were analyzed C14H22O (H111, MW206.0) and C11H14O4 (H31, MW210.08) by GC and GC-MS. D. crassirhizoma derived compounds described herein could be useful for managing filed populations as larvicide of Cx. pipiens, Ae. albopictus and An. sinensis.

본 연구는 수확전 수체살포용 1-MCP(Harvista) 처리가 국내 육성품종인 ‘감홍’ 사과의 품질과 저장성에 미치는 영향을 구명하고자 실시하였다. 수체살포용 1-MCP 처리 후 수확시에 과실의 산 함량은 1-MCP 수확 10일전 처리가 무처리에 비하여 높았으나 다른 과실품질 요인들은 차이가 없었다. 그리고 저장 동안 ‘감홍’ 사과의 품질변화를 보면 저장기간이 길어질 수록 1-MCP 처리 과실들의 경도와 산 함량이 무처리 과실보다 높게 유지되었으나 가용성고형물 함량은 차이가 없었다. 내생 에틸렌 발생량은 수확시에는 처리간 차이가 없이 낮은 에틸렌발생을 보였으나 무처리 과실들은 저장 180일에는 58.31μL · L−1로 급격히 증가한 반면 1- MCP 처리 과실들은 18.24~25.03μL · L−1로 현저히 낮은 발생량을 보였다. 따라서 ‘감홍’ 사과에 수확전 수체살포용 1-MCP 처리가 저장기간동안 과실의 품질을 유지하는데 효과적이었다.

This study aims to address the effect of interferential current therapy and thereby to provide basic resources to physical therapies for internal medicine by identifying symptoms for functional dyspepsia and serum gastrin level that shows gastric motility. Following results were obtained by performing interferential current therapy to 16 subjects composed of 8 for functional dyspepsia group and 8 for control group for 20 minutes a day, 3 days a week, for 6 weeks. In control group, serum gastrin level was significantly( p<.01), lowered after the therapy whereas there was no significant difference observed in all questions from questionnaire for symptoms of functional dyspepsia between before and after the therapy. In functional dyspepsia group, serum gastrin level was significantly(p<.01), lowered after the therapy and there was also significant(p<.01) reduction in every question from questionnaire for symptoms of functional dyspepsia between before and after the therapy. There was more significant decrease in serum gastrin level and reduction in questionnaire for symptoms of functional dyspepsia in the functional dyspepsia group compared to the control group(p<.01). This study confirms the interferential current therapy as an effective therapeutic method for internal diseases including functional dyspepsia since it not only improves the symptoms of functional dyspepsia but also allows the gastric motility close to normal.

The purpose of this study is to analyze the correlation between the stature and the muscle performance ratings and the subjective discomfort rations at performing lower arm's pronation and supination according to change sin the height of working table for more efficient performance at designing a working table and performing a work. For the purpose, this study conducted an experiment targeting 40 people in their 20s, who were classified into 4 groups each group composing 10 people at intervals of 5cm from the standard stature of 166.5cm. The experiment measured the maximum isometric pronation and the supination muscular power, and at measuring the factors, the heights of working tables were set as 800mm, 850mm, and 900mm. From the measurement results, it was found that the stature and the maximum muscular power was correlated. That is, as the experiment groups's average stature is higher, the maximum muscular power was higher. For the correlation between the motion patterns(pronation and supination) and the maximum muscular power, it was seen that the maximum muscular power was higher at performing the pronation than the supination. In the correlation between motion patterns and the subjective discomfort ratings, it was seen that the subjective discomfort rating was higher at performing the supination than the pronation. For the correlation between height adjustment and the subjective discomfort ratings, as the height of working table was lower, the subject discomfort rating was lower. Therefore there was no difference in the maximum muscular power according to the height changes of working table, but it was found that as the working table was higher, the user felt more comfortable.