Porous hard carbon has recently gained attention as an anode material for KIB because of its superior potassium ion storage performance. In this study, an efficient method for producing polyethylene-based hollow porous carbon is presented. Partial sulfonation was applied, and the porosity of the resulting carbon material was regulated by the sulfonation time. A hollow structure with the high specific surface area of 173.3 m2/g was achieved via partial sulfonation and carbonization without additional activation. Using polyethylene (PE)-based porous carbon as an anode material for KIB, a high specific discharge capacity of 187 mAh/g and excellent rate capability at 1000 mA/g were achieved. Moreover, potassium-ion storage mechanisms were identified and compared with those of non-porous PE-based carbon anodes. This study provides an effective method for preparing porous PE-based carbon with superior energy storage performance.

In this study, nitrogen and fluorine co-doped carbon nanocages (NF-CNCs) were synthesized as anode materials for potassium- ion batteries (KIBs), and their structural evolution with heat treatment and electrochemical behavior with different functional groups was investigated. NF-CNCs were prepared by physically mixing coal tar pitch (CTP) with a SiO2 template, followed by heat treatment and subsequent fluorination with NF3 gas. A systematic investigation of the structural properties revealed that graphitization increased with increasing heat treatment temperature as the carbon structure transitioned from amorphous at 500 and 1000 °C to graphite-like at 1500 °C. Furthermore, nitrogen and fluorine functional group analysis revealed significant changes, particularly in terms of covalent and semi-ionic C‒F bonds. Among the samples, NF-CNC 1000 displayed excellent electrochemical performance, with a specific capacity of 395.1 mAh g− 1 and a capacity retention rate of 94% during 1000 cycles at 50 mA g− 1. The exceptional performance of NF-CNC 1000 is attributed to its high porosity, amorphous carbon structure, and semi-ionic C‒F bonds, which facilitate the efficient adsorption and intercalation of potassium ions. These findings provide valuable insights into the design of advanced anode materials for next-generation KIBs.

We produced an activated carbon using sodium-lignosulfonate, in which we investigated how the sodium salt in lignin served as the activating agent during heat treatment. Our process resulted in a product with a high specific surface area of 1324 m2/ g at 800 °C and microporous structure. During the activation process, we observed the consumption of carbon due to the dehydration reaction of NaOH and the reduction of Na2CO3 to metallic Na, which created pores through oxidation/ reduction reactions. The intercalation of metallic Na between the lattices at high temperatures formed additional pores and increased the specific surface area. Our proposed mechanism holds promise for enhancing the control of the microstructure and porosity of activated carbons through the thermal treatment of biomass.

This study demonstrates that low processing rate for producing polyacrylonitrile (PAN)-based carbon fiber is a critical to obtain a homogeneous radial microstructure with high resistance to oxidation, thereby resulting in their improved mechanical strength. The dry-jet wet spun PAN organic fibers were processed (e.g., stabilized and then carbonized) utilizing two different rates; one is 1.6 times longer than the other. The effect of processing rate on the microstructural evolutions of carbon fibers was analyzed by scanning electron microscopy after slow etching in air, as well as Raman mapping after graphitization. The rapidly processed fiber exhibited the multilayered radial structure, which is caused by the radial direction stretching of the extrusion in the spinning. In case of the slowly processed fiber, the layered radial structure formed in the spinning process was changed into a more homogeneous radial microstructure. The slowly processed fibers showed higher oxidation resistance, higher mechanical properties, and higher crystallinity than the rapidly processed one. Raman mapping confirmed that the microstructure developed during spinning was sustained even though fiber was thermally treated up to 2800 °C.

A simple, but effective means of tailoring the physical and chemical properties of carbon materials should be secured. In this sense, chemical doping by incorporating boron or nitrogen into carbon materials has been examined as a powerful tool which provides distinctive advantages over exohedral doping. In this paper, we review recent results pertaining methods by which to introduce boron atoms into the sp2 carbon lattice by means of high-temperature thermal diffusion, the properties induced by boron doping, and promising applications of this type of doping. We envisage that intrinsic boron doping will accelerate both scientific and industrial developments in the area of carbon science and technology in the future.