검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 17

        1.
        2023.10 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Exploring earth-abundant, highly effective and stable electrocatalysts for electrochemical water splitting is urgent and essential to the development of hydrogen (H2) energy technology. Iron-cobalt layered double hydroxide (FeCo-LDH) has been widely used as an electrocatalystfor OER due to its facile synthesis, tunable components, and low cost. However, LDH synthesized by the traditional hydrothermal method tends to easily agglomerate, resulting in an unstable structure that can change or dissolve in an alkaline solution. Therefore, studying the real active phase is highly significant in the design of electrochemical electrode materials. Here, metal-organic frameworks (MOFs) are used as template precursors to derive FeCo-LDH from different iron sources. Iron salts with different anions have a significant impact on the morphology and charge transfer properties of the resulting materials. FeCo-LDH synthesized from iron sulfate solution (FeCo-LDH-SO4) exhibits a hybrid structure of nanosheets and nanowires, quite different from other electrocatalysts that were synthesized from iron chloride and iron nitrate solutions. The final FeCo-LDH-SO4 had an overpotential of 247 mV with a low Tafel-slope of 60.6 mV dec-1 at a current density of 10 mA cm-2 and delivered a long-term stability of 40 h for the OER. This work provides an innovative and feasible strategy to construct efficient electrocatalysts.
        4,000원
        4.
        2022.11 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        The Cu2ZnSn(SxSe1-x)4 (CZTSSe) absorbers are promising thin film solar cells (TFSCs) materials, to replace existing Cu(In,Ga)Se2 (CIGS) and CdTe photovoltaic technology. However, the best reported efficiency for a CZTSSe device, of 13.6 %, is still too low for commercial use. Recently, partially replacing the Zn2+ element with a Cd2+element has attracting attention as one of the promising strategies for improving the photovoltaic characteristics of the CZTSSe TFSCs. Cd2+ elements are known to improve the grain size of the CZTSSe absorber thin films and improve optoelectronic properties by suppressing potential defects, causing short-circuit current (Jsc) loss. In this study, the structural, compositional, and morphological characteristics of CZTSSe and CZCTSSe thin films were investigated using X-ray diffraction (XRD), X-ray fluorescence spectrometer (XRF), and Field-emission scanning electron microscopy (FE-SEM), respectively. The FE-SEM images revealed that the grain size improved with increasing Cd2+ alloying in the CZTSSe thin films. Moreover, there was a slight decrease in small grain distribution as well as voids near the CZTSSe/Mo interface after Cd2+ alloying. The solar cells prepared using the most promising CZTSSe absorber thin films with Cd2+ alloying (8 min. 30 sec.) exhibited a power conversion efficiency (PCE) of 9.33 %, Jsc of 34.0 mA/cm2, and fill factor (FF) of 62.7 %, respectively.
        4,000원
        5.
        2022.10 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        The oxygen evolution reaction (OER) is very sluggish compared to the hydrogen evolution reaction (HER). Considering this difference is essential when designing and developing a cost-effective and facile synthesis method for a catalyst that can effectively perform OER activity. The material should possess a high surface area and more active sites. Considering these points, in this work we successfully synthesized sheets of cobalt phosphate hydrate (CP) and sulphurated cobalt phosphate hydrate (CPS) material, using simple successive ionic layered adsorption and reaction (SILAR) methods followed by sulfurization. The CP and CPS electrodes exhibited overpotentials of 279 mV with a Tafel slope of 212 mV dec1 and 381 mV with a Tafel slope of 212 mV dec1, respectively. The superior performance after sulfurization is attributed to the intrinsic activity of the deposited well-aligned nanosheet structures, which provided a substantial number of electrochemically active surface sites, speeded electron transfer, and at the same time improved the diffusion of the electrolyte.
        4,000원
        6.
        2022.05 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Designing and producing a low-cost, high-current-density electrode with good electrocatalytic activity for the oxygen evolution reaction (OER) is still a major challenge for the industrial hydrogen energy economy. In this study, nanostructured Fe-doped CuCo(OH)2 was discovered to be a precedent electrocatalyst for OER with low overpotential, low Tafel slope, good durability, and high electrochemically active surface sites at reduced mass loadings. Fe-doped CuCo(OH)2 nanosheets are made using a hydrothermal synthesis process. These nanosheets are clumped together to form a highly open hierarchical structure. When used as an electrocatalyst, the Fe-doped CuCo(OH)2 nanosheets required an overpotential of 260 mV to reach a current density of 50 mA cm−2. Also, it showed a small Tafel slope of 72.9 mV dec−1, and superior stability while catalyzing the generation of O2 continuously for 20 hours. The Fe-doped CuCo(OH)2 was found to have a large number of active sites which provide hierarchical and stable transfer routes for both electrolyte ions and electrons, resulting in exceptional OER performance.
        4,000원
        8.
        2021.11 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Cu2ZnSn(S,Se)4 (CZTSSe) based thin-film solar cells have attracted growing attention because of their earthabundant and non-toxic elements. However, because of their large open-circuit voltage (Voc)-deficit, CZTSSe solar cells exhibit poor device performance compared to well-established Cu(In,Ga)(S,Se)2 (CIGS) and CdTe based solar cells. One of the main causes of this large Voc-deficit is poor absorber properties for example, high band tailing properties, defects, secondary phases, carrier recombination, etc. In particular, the fabrication of absorbers using physical methods results in poor surface morphology, such as pin-holes and voids. To overcome this problem and form large and homogeneous CZTSSe grains, CZTSSe based absorber layers are prepared by a sputtering technique with different RTA conditions. The temperature is varied from 510 oC to 540 oC during the rapid thermal annealing (RTA) process. Further, CZTSSe thin films are examined with X-ray diffraction, X-ray fluorescence, Raman spectroscopy, IPCE, Energy dispersive spectroscopy and Scanning electron microscopy techniques. The present work shows that Cu-based secondary phase formation can be suppressed in the CZTSSe absorber layer at an optimum RTA condition.
        4,000원
        9.
        2021.03 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Zinc oxide (ZnO) based transparent conducting oxides (TCO) thin films, are used in many applications such as solar cells, flat panel displays, and LEDs due to their wide bandgap nature and excellent electrical properties. In the present work, fluorine and aluminium-doped ZnO targets are prepared and thin films are deposited on soda-lime glass substrate using a RF magnetron sputtering unit. The aluminium concentration is fixed at 2 wt%, and the fluorine concentration is adjusted between 0 to 2.0 wt% with five different concentrations, namely, Al2ZnO98(AZO), F0.5AZO97.5(FAZO1), F1AZO97(FAZO2), F1.5AZO96.5(FAZO3), and F2AZO96(FAZO4). Thin films are deposited with an RF power of 40 W and working pressure of 5 m Torr at 270 oC. The morphological analysis performed for the thin film reveals that surface roughness decreases in FAZO1 and FAZO2 samples when doped with a small amount of fluorine. Further, optical and electrical properties measured for FAZO1 sample show average optical transmissions of over 89 % in the visible region and 82.5 % in the infrared region, followed by low resistivity and sheet resistance of 3.59 × 10−4 Ωcm and 5.52 Ω/sq, respectively. In future, these thin films with excellent optoelectronic properties can be used for thin-film solar cell and other optoelectronics applications.
        4,000원
        10.
        2020.06 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Recent advances in technology using ultra-thin noble metal film in oxide/metal/oxide structures have attracted attention because this material is a promising alternative to meet the needs of transparent conduction electrodes (TCE). AZO/ Ag/AZO multilayer films are prepared by magnetron sputtering for Cu2ZnSn(S,Se)4 (CZTSSe) of kesterite solar cells. It is shown that the electrical and optical properties of the AZO/Ag/AZO multilayer films can be improved by the very low resistivity and surface plasmon effects due to the deposition of different thicknesses of Ag layer between oxide layers fixed at AZO 30 nm. The AZO/Ag/AZO multilayer films of Ag 15 nm show high mobility of 26.4 cm2/Vs and low resistivity and sheet resistance of 3.58*10−5 Ωcm and 5.0 Ω/sq. Also, the AZO/Ag (15 nm)/AZO multilayer film shows relatively high transmittance of more than 65% in the visible region. Through this, we fabricated CZTSSe thin film solar cells with 7.51% efficiency by improving the short-circuit current density and fill factor to 27.7 mV/cm2 and 62 %, respectively.
        4,000원
        11.
        2020.05 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        The design and fabrication of catalysts with low-cost and high electrocatalytic activity for the oxygen evolution reaction (OER) have remained challenging because of the sluggish kinetics of this reaction. The key to the pursuit of efficient electrocatalysts is to design them with high surface area and more active sites. In this work, we have successfully synthesized a highly stable and active NiCo2S4 nanowire array on a Ni-foam substrate (NiCo2S4 NW/NF) via a two-step hydrothermal synthesis approach. This NiCo2S4 NW/NF exhibits overpotential as low as 275 mV, delivering a current density of 20 mA cm-2 (versus reversible hydrogen electrode) with a low Tafel slope of 89 mV dec-1 and superior long-term stability for 20 h in 1M KOH electrolyte. The outstanding performance is ascribed to the inherent activity of the binder-free deposited, vertically aligned nanowire structure, which provides a large number of electrochemically active surface sites, accelerating electron transfer, and simultaneously enhancing the diffusion of electrolyte.
        4,000원
        12.
        2019.09 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Cu2ZnSn(S,Se)4(CZTSSe) thin film solar cells areone of the most promising candidates for photovoltaic devices due to their earth-abundant composition, high absorption coefficient and appropriate band gap. The sputtering process is the main challenge to achieving high efficiency of CZTSSe solar cells for industrialization. In this study, we fabricated CZTSSe absorbers on Mo coated soda lime glass using different pressures during the annealing process. As an environmental strategy, the annealing process is performed with S and Se powder, without any toxic H2Se and/or H2S gases. Because CZTSSe thin films have a very narrow stable phase region, it is important to control the condition of the annealing process to achieve high efficiency of the solar cell. To identify the effect of process pressure during the sulfo-selenization, we experiment with varying initial pressure from 600 Torr to 800 Torr. We fabricate a CZTSSe thin film solar cell with 8.24 % efficiency, with 435 mV for open circuit voltage(VOC) and 36.98 mA/cm2 for short circuit current density(JSC), under a highest process pressure of 800 Torr.
        4,000원
        13.
        2019.01 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        담관의 게실은 Todani 분류에 부합하지 않는 드문 형태의 담관의 낭성 확장이며, 질환의 희소성으로 인하여 진료 현장에서 진단이나 치료에 어려움을 겪을 수 있다. 본 증례보고에서는 복통을 주소로 내원한 57세 여성 환자에서 발생한 간외 좌측 담관 게실의 증례를 문헌고찰과 함께 보고하고자 한다. 내원 당시 환자는 간기능 검사에서의 경미한 증가 외에 혈액검사상 이상 소견은 보이지 않았다. 전산화단층촬영과 자기공명 담도췌관조영술에서 간내담관의 합류 부분 근처에 슬러지 볼을 포함한 낭성 병변이 보였으나 병변의 기원은 명확히 보이지 않았다. 임상적으로는 Todani II형 총담관낭이 의심되었다. 환자의 복통이 지속되어 해당 병변에 대하여 수술적 절제를 시행하였고 수술 결과 좌측 담관 게실로 진단되었다. 절제된 조직은 병리학적 검사상 담도 상피로 덮인 게실로 확인되었다. 수술 후 합병증은 발생하지 않았으며 수술적 제거 후 환자의 증상은 호전되었다.
        3,000원
        14.
        2018.07 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        미리찌 증후군은 담낭결석증의 드문 합병증으로, 담낭 경부나 담낭관의 결석에 의한 압박으로 인해 총간관의 폐쇄가 발생하게 된다. 미리찌 증후군은 수술적 치료를 하게 되며 그 방법은 질환의 세부 분류에 따라 다양하다. 미리찌 증후군의 외과적 치료 후 발생한 담관 협착은 드문 합병증이며 담도-장 문합술을 시행한 환자에서 이를 내시경적으로 치료하는 것은 불가능하다. 본 증례는 미리찌 증후군의 수술적 치료 후 발생한 담관 문합부 협착을 장기간 경피경간 담도배액술로 치료하여 이를 문헌고찰과 함께 보고하는 바이다.
        4,000원
        15.
        2017.11 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        We report facile solution processing of mesoporous hematite (α-Fe2O3) thin films for high efficiency solar-driven water splitting. Fe2O3 thin films were prepared on fluorine doped tin oxide(FTO) conducting substrates by spin coating of a precursor solution followed by annealing at 550 oC for 30 min. in air ambient. Specifically, the precursor solution was prepared by dissolving non-toxic FeCl3 as an Fe source in highly versatile dimethyl sulfoxide(DMSO) as a solvent. The as-deposited and annealed thin films were characterized for their morphological, structural and optical properties using field-emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS) and UV-Vis absorption spectroscopy. The photoelectrochemical performance of the precursor (α-FeOOH) and annealed (α-Fe2O3) films were characterized and it was found that the α-Fe2O3 film exhibited an increased photocurrent density of ~0.78 mA/cm2 at 1.23 V vs. RHE, which is about 3.4 times higher than that of the α-FeOOH films (0.23 mA/cm2 at 1.23 V vs. RHE). The improved performance can be attributed to the improved crystallinity and porosity of α-Fe2O3 thin films after annealing treatment at higher temperatures. Detailed electrical characterization was further carried out to elucidate the enhanced PEC performance of α-Fe2O3 thin films.
        4,000원
        17.
        2018.04 KCI 등재 서비스 종료(열람 제한)
        흡연 유무의 남성을 대상으로 뇌 회백질의 손상 유무를 파악 할 수 있는 확산텐서영상을 검사하여 영상을 획득 한 후 Tract-Based Spatial Statics(TBSS)방법으로 뇌 회백질 부위의 기저핵 신경섬유로의 비등방도 FA(fractional anisotropy)값을 측정 분석한 결과 모든 영역에서 흡연자가 비흡연자보다 비등방성 측정값이 낮게 관찰되었으며 FA값은 통계적으로 유의하였다. 본 연구의 측정한 FA결과 값으로 추측하자면 즉, 흡연이 뇌 회백질 기저핵의 모든 해부학적 미세 구조성 변화에 크게 영향을 미치며 신경 섬유로를 손상시키고 이와 관련된 기능적 이상에 영향을 준다고 할 수 있다.