In gamma-ray spectrometry for volume samples, the self-attenuation effect should be considered in the case of differences in chemical composition and density between the efficiency calibration source for quantitative analysis of sample and the sample actually measured. In particular, the lower the gamma-ray energy, the greater the gamma-ray attenuation due to the self-attenuation effect of the sample. So, the attenuation effect of low-energy gamma-rays in the sample should be corrected to avoid over- or under-estimation of its radioactivity. One of the most important factors in correcting the self-attenuation effect of the sample is the linear attenuation coefficient for the sample, which can be directly calculated using a collimator. The larger the size of the collimator, the more advantageous it is to calculate the linear attenuation coefficient of the sample, but excessive size may limit the use of the collimator in a typical environmental laboratory due to its heavy weight. Therefore, it is necessary to optimize the collimator size and structure according to the measurement environment and purpose. This study is to optimize a collimator that can determine the effective linear attenuation coefficient of low-energy gamma-rays, and verify its applicability. The overall structure of the designed collimator was optimized for gamma-ray energy of less than 100 keV and cylindrical plastic bottle with diameter of 60 mm and a height of 40 mm. The materials of optimized collimator consisted of tungsten. Acryl and acetal were used to form the housing of the collimator, which fixes the central axis of the bottle, collimator and point-like source. In addition, using the housing, the height of the tungsten is adjusted according to the height of the sample. For applicability evaluation of the optimized collimator, IAEA reference material in solid form were used. The sample was filled in the bottle with heights of 1, 2, 3 and 4 cm respectively. Using the collimator and point-like source of 210Pb (46.5 keV), 241Am (59.5 keV), and 57Co (121.1 keV), the linear attenuation coefficient and the radioactivity for the samples were calculated. As a result, to calculate the linear attenuation coefficient using the optimized collimator, a relatively high sample height is required. However, the optimized collimator can be used to determine the linear attenuation coefficients of low-energy gamma-rays for the self-attenuation correction regardless of the sample height. It is concluded that the optimized collimator can be useful to correct the sample selfattenuation effect.

본 연구에서는 원자력 사고 또는 방사선 비상 시 지표면에 침적될 수 있는 감마선방출 핵종의 방사능을 신속하게 평가하기 위해 이용될 수 있는 NaI(Tl), LaBr3(Ce) 및 CeBr3 섬광검출기의 성능을 비교 평가하였다. 검출성능은 최소검출가능방사능 (MDA, Minimum Detectable Activity)을 통해 평가하였으며, 각 검출기의 지표면 침적 감마선방출 핵종에 대한 검출효율은 수학적 모델링과 점선원을 이용하여 반실험적으로 산출하였다. MDA 평가를 위한 백그라운드 감마선에너지스펙트럼은 비교적 넓고 평탄한 초지에서 측정되었으며, 원자력 사고 시 방출될 수 있는 주요 핵종에 대한 각 검출기의 MDA를 산출하였다. 그 결과 일반 환경방사능 준위에서 지표면 침적 감마핵종에 대한 각 검출기의 MDA 크기는 대체로“NaI(Tl)> LaBr3(Ce)> CeBr3”로 평가되었으며, 백그라운드 준위가 유사한 에너지 영역에서는 분해능이 가장 우수한 LaBr3(Ce)에서 최소 값을 보였다. 이는 관심 핵종의 감마선에너지 영역에 대한 각 검출기의 자체 및 측정 환경 백그라운드, 측정 효율, 그리고 에너지 분해능 특성을 바탕으로 비교 분석되었다.