Radiation workers who handle radioisotopes, radioactive waste, nuclear material etc. may be contaminated with radioactive material due to inhalation, resulting in internal radiation exposure. For preventing radiation damage and monitoring the exposure of workers, KAERI operates a Body Radiation Measurement Laboratory. According to Article 5 of the Nuclear Safety and Security Commission (NSSC) Notice No. 2017-77, “Regulation on Measurement and Calculation of Internal Radiation Dose,” The nuclear energy-related business operator with workers etc. shall establish and operate procedures and methods including the following Subparagraphs to secure the reliability of measurement of the internal radiation dose : operation and calibration of measuring instrument, inspection procedures, uncertainty of measurement, lower limit of detection and geometric configuration used for measurement. In accordance with the provision, Whole Body Counter utilized in the Body radiation Measurement Laboratory has periodic calibration / QA procedures to ensure reliability. This paper performed reliability validation of the measurement system of the Body Radiation Measurement Laboratory in the KAERI based on the performance criteria for radio-bioassay criteria presented in ISO 28218 and ANSI HPS N13.30-2011(R2017). The first criteria is MTL (Minimum Testing Level). ISO 28218 provides MTLs for each measurement category, type and nuclide. For reliable results, it is recommended to use calibration sources with higher radioactivity than the values given. The MTL for fission products in total body counting is 3 kBq and for the last 3 years the laboratory has been using sources of 6-7 kBq (Co-60, Cs-137 etc.). The second criteria is RMSE (Root Mean Square Error). It is a measure of total error defined as the square root of the sum of the square of the relative precision (SB) and the square of the relative bias (Br). The RMSE shall be lower than or equal to 0.25. The largest RMSE in the last 3 years is 0.12, and average value is 0.065, which meets the criteria. In this study, we verified the reliability of the radioactivity measurement system (WBC) based on the radio-bioassay standards presented in ISO 28218 and ANSI HPS N13.30-2011(R2017). The values were obtained using 3 years of calibration count data, and it was found that both MTL, RMSE for each nuclide met the standards with a large margin of error and were in good operating condition. This study can be applied to the maintenance, performance check, and reliability verification of similar in vivo radio-bioassay methods.

Kr-85 has a half-life of 10.7 years and it stays in the atmosphere for a long time. However it does not accumulate as an noble gas but only emits beta particles. Therefore its contribution to environmental radiation dose is lower than any other radionuclides. Kr-85 is one of the main fission products produced by nuclear fission reaction and artificial radionuclide that does not exist in nature. For these reasons, monitoring Kr-85 from the atmosphere is meaningful so that the nuclear-related facilities are recommended to control and regulate environmental emissions. Post Irradiation Examination Facility (PIEF) which located in KAERI is a facility that conducts various material and chemical experiments using the irradiated nuclear fuels. Therefore, various radionuclides can present in gaseous effluent including Kr-85. To prevent the environmental hazards and guarantee the radiation safety of the public, nuclear facilities are recommended to be equipped with stack radiation/radioactivity monitoring system, so that the Kr-85 concentration in gaseous effluent is controlled within the regulatory criteria. Particularly, the Kr-85 concentration of gaseous effluent is commonly monitored by the stack monitoring system connected to the process ventilation system from the hot cell. The monitoring system supply the information such as beta count rate, dose rate and flow rate, etc. Due to the concentration of Kr-85 in gaseous effluent is subject to regulatory guide lines, a systemized procedure for calculating Kr-85 concentration of the stack exhaust is necessary. Furthermore, the emission should be monitored whether it satisfies the regulatory standard or does not. This paper performed discussion on the process of calculating the concentration of Kr-85 in the gaseous effluent of PIEF stack from the monitoring system (NGM209, MGP), and the amount of Kr- 85 over the last 2 years emissions was calculated. In addition to calculating effluent rate of radioactive Kr-85, the Minimum Detectable Concentration (MDC) and Decision Threshold (SD) were calculated. As a result, the calculated Kr-85 concentration was below the SD during the entire period. It is considered that there are no environmental emissions of Kr-85.

In this paper, we introduce a target position reasoning system based on Bayesian network that selects destinations of robots on a map to explore compound disaster environments. Compound disaster accidents have hazardous conditions because of a low visibility and a high temperature. Before firefighters enter the environment, the robots notify information in advance, such as victim’s positions, number of victims, and status of debris of building. The problem of the previous system is that the system requires a target position to operate the robots and the firefighter need to learn how to use the robot. However, selecting the target position is not easy because of the information gap between eyewitness accounts and map coordinates. In addition, learning the technique how to use the robots needs a lot of time and money. The proposed system infers the target area using Bayesian network and selects proper x, y coordinates on the map based on image processing methods of the map. To verify the proposed system, we designed three example scenarios based on eyewetinees testimonies and compared time consumption between human and the system. In addition, we evaluate the system usability by 40 subjects.