Hypertension is characterized by excessive renin-angiotensin system activity, leading to blood vessel constriction. Several synthetic compounds have been developed to inhibit renin and angiotensin-converting enzyme (ACE). These drugs often have adverse side effects, driving the exploration of plant protein-derived peptides as alternative or supplementary treatments. This study assessed the phenolic compound and amino acid content and the antioxidant and antihypertensive activity of 5 South Korean staple crops. Sorghum had the highest phenolic compound content and exhibited the highest antioxidant activity. Millet grains, particularly finger millet (38.86%), showed higher antihypertensive activity than red beans (14.42%) and sorghum (17.16%). Finger millet was found to contain a large proportion of branched-chain, aromatic, and sulfur-containing amino acids, which are associated with ACE inhibition. In particular, cysteine content was positively correlated with ACE inhibition in the crops tested (r=0.696, p<0.01). This study confirmed that the amino acid composition was more correlated with the antihypertensive activity of grains than the phenolic compound content. Finger millet mainly contained amino acids, which have higher ACE inhibitory activity, resulting in the strongest antihypertensive activity. These findings underscore the antihypertensive potential of select crops as plant-based food ingredients, offering insight into their biological functions.

For efficient design and manufacture of PWR spent fuel burnup detector, data simulated with various condition of spent fuel in the NPP storage pool is required. In this paper, to derive performance requirements of spent fuel burnup detector for neutron flux and dose rates were evaluated at various distances from CE16 and WH17 types of fuel, representatively. The evaluation was performed by the following steps. First, the specifications of the spent fuel, such as enrichment, burnup, cooling time, and fuel type, were analyzed to find the conditions that emit maximum radioactivity. Second, gamma and neutron source terms of spent fuel were analyzed. The gamma source terms by actinides and fission products and neutron source terms by spontaneous and (α, n) reactions were calculated by SCALE6 ORIGAMI module. Third, simulation input data and model were applied to the evaluation. The material composition and dose conversion factor were referred as PNNL-15870 and ICRP-74 data, respectively and dose rates were displayed with the MCNP output data. It was assumed that there was only one fuel modeled by MCNP 6.2 code in pool. The evaluation positions for each distance were selected as 5 cm, 10 cm, 25 cm, 50 cm, and 1 m apart from the side of fuel, respectively. Fourth, neutron flux and dose rates were evaluated at distance from each fuel type by MCNP 6.2 code. For WH 17 types with a 50 GWd/MTU burnup from 5 cm distance close to fuel, the maximum neutron flux, gamma dose rates and neutron dose rates are evaluated as 1.01×105 neutrons/sec, 1.41×105 mSv/hr and 1.61×101 mSv/hr, respectively. The flux and dose rate of WH type were evaluated to be larger than those of CE type by difference in number of fuel rods. The relative error for result was less than 3~7% on average secured the reliability. It is expected that the simulated data in this paper could contribute to accumulate the basic data required to derive performance requirements of spent fuel burnup detector.

본 연구는 주변 환경의 차이에 따른 화분매개곤충의 유입 특성을 파악하기 위하여 국립수목원 내 진화속을걷 는정원과 부추속전문전시원에 식재된 울릉산마늘의 화분매개곤충을 조사하였다. 2023년 5월 22일부터 6월 2일 까지 꽃이 70% 이상 개화하였을 때 포충망을 활용하여 8일간 곤충을 채집하였고, 각 전시원 별 식생(피도), 기후 (온도·습도·조도)를 조사하였다. 조사 결과 진화속을걷는정원에서 피도 60% 온도 26.4℃, 습도 31.5%, 조도 40953.6lx, 화분매개곤충 20과 450개체, 부추속전문전시원은 피도 90%, 온도 25.6℃, 습도 31.6%, 조도 6387lx, 화분매개곤충 15과 196개체로 나타났다. 온도와 조도가 상대적으로 높은 진화속을걷는정원이 채집된 곤충의 다양성과 방문 빈도가 높았다. 시간대별 곤충의 방문 빈도를 비교해본 결과 온도와 조도는 개체수가 증가할 때 같이 증가하는 경향을 보였으며, 습도는 반대의 경향을 보였다.

The growth characteristics according to temperature conditions were investigated in the breeding room of the Sericulture & Entomology Experiment Station for Oriental garden crickets(Teleogryllus emma Ohmachi et Matsuura) and Modeagali-crickests(Loxoblemmus doenitzi Stein) collected from the lawns of Byeonsan-myeon, Buan-gun, Jeollabuk-do. The temperature conditions were 6 treatments from 15°C to 40°C at 5°C intervals using a multi-incubator, and the development period and mortality rate by age were compared using the 28°C breeding room conditions as a control. For T. emma, the higher the temperature, the shorter the total development period was, and the same trend was observed for the growth period by age stage. However, at low temperatures of 15°C and 20°C, all died after the third instar, and at high temperatures above 35°C, all died during development. At 25°C and 30°C, they developed normally, and the mortality rate was about 25%. The L. doenizi had the same tendency as the T. emma, with the higher the temperature, the shorter the development period. The total development period was 57.7 days at 25°C, which was similar to the T. emma's 55.9 days, and the mortality rate was the lowest at 44% at 25°C.

In this study, radioactivity of Cs-134, Cs-137, and Eu-154, which are gamma-emitting nuclides among fission products of spent fuel, was analyzed as a tool to measure the burnup of spent fuel nondestructively. This nuclide has a unique gamma-ray energy, allowing the amount of the isotope to be estimated based on the intensity of the gamma-ray at a specific energy. The SCALE 6.2 ORIGAMI (ORIGen AsseMbly Isotopics) module and the latest ORIGEN-arp library were used for computational analysis. The spent fuel samples were selected as WH14×14 with an enrichment of 1.5~5.0wt%, a burnup of 10~60 GWD/MTU, and a cooling time of 0~40 years. The analysis results were benchmarked using SFCOMPO experimental data provided by OECD/ NEA, including isotope inventory and uncertainty measured by destructive radiochemical analysis, fuel assembly design data required for benchmark model development, reactor design information, and operating history information. 16 similar spent fuels were selected from SFCOMPO data and the calculation results of Cs-134, Cs-137, and Eu-154 were compared. The average error of the Cs-134 radioactivity calculation result was 2.81%, and the maximum error was 6.70%. The average errors of Cs-137 and Eu-154 were 2.42% and 4.95%, respectively, and the maximum errors were 5.40% and 14.91%, respectively.

CANDU Spent Fuel (CSF) dry storage system, SILO, has been operated from 1992 at Wolsung under 50 year operating license. As of 2023, this system has been operated for over 30 years and its licensed remaining operation time is less than 20 years. When it faces the final stage of operation, it has only two options; moving to a centralized away-from-reactor storage or extending its license atreactor. These two options have an inevitable common duty of confirming the CSF integrity by a “demonstration test”. Since the degradation of CSF and structural materials in the SILO are critically dependent on temperature, two important goals of the ‘DEMO test’ were set as follows. 1. Design of ‘DEMO SILO’: Development of internal monitoring technology by transforming SILO design. 2. Accurate measurement and evaluation of the three-dimensional temperature distribution in the ‘DEMO SILO’ Based on operating real commercial SILO dimension, a conceptual “DEMO SILO” design has been developed from 2022. Because, unlike with commercial Silo, ‘Demo Silo’ must be disassembled and assembled, and have penetration holes. Safety evaluation technologies like structural, thermal and radiation protection analysis also have been developed with design work. ‘Demo SILO’ should evaluate an accurate 3D temperature distribution with minimal number of thermocouples and penetration holes to avoid disruption of internal flow and temperature distribution. For this reason, a ‘Best Estimate Thermal-Hydraulics evaluation system for SILO’ is under development and it will be essential for ensuring temperature prediction accuracy. Construction of a full-scale test apparatus to validate this technology will begin in 2024. In order to supply power to many heaters and monitor temperature gradient inside of this apparatus, it has modular design concept by dividing its whole body to axial 9 sub-bodies which looks like a donut containing a basket at center position.

This study presents a rapid and quantitative radiochemical separation method for Nb isotopes in radioactive waste samples from the nuclear power plant with anion exchange resin after Fe coprecipitation. After radionuclides were leached from the radioactive waste samples with concentrated HCl and HNO3, the Nb isotopes were coprecipitated with Fe after filtering the leaching solution with 0.45 micron HA filter, while the Sr, Tc and Ni isotopes were in the solution. The Nb isotopes were separated in HCl medium with anion exchange resin. The purified Nb isotopes were measured using a low level liquid scintillation counter after installing quenching curve with standard Nb-94 isotopes. The separation method for Nb isotopes investigated in this study was applied to neutron dosimeter samples from the nuclear power plant after validating the Nb activity concentration with gamma spectrometry system.

This study presents a rapid and quantitative sequential separation method for H-3 and C-14 isotopes with distillation apparatus in environmental samples released from nuclear facilities. After adding 200 mg of granulated potassium permanganate and 500 mg of sodium hydroxide in 100 mL of sample solution, the sample solution was heated until approximately 10 mL of distillate, and the distillate fraction was removed. The sample solution was heated again until a minimum 10 mL of additional distillate was collected. 10 mL of distillate was transferred to the LSC vail and the measurement sample for H-3 was made by adding 10 mL of Ultima Gold LLT to the LSC vial. After adding 2.5 g of potassium persulfate, 2 mL of 1M silver nitrate and 15 mL of concentrated nitric acid to the remained sample solution, the sample solution was heated for 90 minutes and C-14 isotopes were adsorbed into 10 mL of Carbo-Sorb solution in glass vial. The measurement sample for C-14 was made by adding 10 mL of Permafluor to the C-14 fraction in glass vial. The purified H-3 and C-14 samples were measured by the liquid scintillation counter after quenching correction. The average recoveries of H-3 and C-14 with CRM were measured to be 96% and 85%, respectively. The sequential separation method for H-3 and C-14 investigated in this study was applied to activated charcoal filter produced from nuclear power plants after validating the reliability by result of proficiency test (KOLAS-KRISS, PT-2021-51).

한-아프리카 농식품 기술협력 협의체 (KAFACI)는 아프리카 농업 공통현안을 연구과제를 통하여 해결하고자 2010년에 출범하여 현재 한국 포함 20개국으로 구성되었다. 본 논문은 지난 10년간 회원국에서 수행한 결과를 바탕으로 KAFACI 회원 국과 비회원국 간의 양자 무역 흐름에 대한 국제 기술 협력의 영향을 분석하였다. 분석은 UN 상품 무역 통계 데이터베이스에서 2000년에서 2018년 동안 45 개 아프리카 국가 간의 양 자 무역 패널 데이터를 이용하였으며 국제 무역 중력 모델을 적용하였다. 또한, 내생성, 표본 선택 편의, 패널내의 상관관계 를 통제하는 표본 선택 기법을 적용한 핵크만 랜덤 효과 회귀 모형을 사용하였다. 분석결과 경험적 결과는 국제 기술 협력이 KAFACI 회원국과 비회원 국 간의 양자 무역 흐름에 긍정적인 영향을 미친다는 것을 보여준다. 이러한 연구 결과 이 외에도 KAFACI는 회원국과 아프리카 이외의 주요 무역 파트 너 간의 양자 무역 흐름을 크게 늘렸을 가능성이 있지만 여기서는 다루지 않았다. 또한 KAFACI 회원국의 기술 채택 수준과 비율은 무역을 잠금 해제하기 위해 경제의 공급 측면에 영향을 미치는데 중요하지만 여기에서는 다루지 않았다.

캐주얼게임은 게임의 난이도나 규칙이 어려운 하드코어 게임에 비해 상대적으로 규칙이 쉽고 간단한 게임을 말한다. 캐주얼 게임은 게임의 특성상 짧은 여유시간에 즐기는 킬링 타임용 플레이에 더 적합하며, 단순한 규칙을 바탕으로 다양한 사용자층이 쉽게 즐길 수 있는 장점을 가진 콘텐츠이다. 2016년 이후글로벌 게임 산업의 비중에 있어서도 모바일 게임 시장 규모가 다른 플랫폼을 넘어섰으며, 캐주얼 게임의 장점과 특징이 모바일 게임 시장의 성장과 확대에 큰 영향을 미쳤다. 캐주얼 게임은 간단하고 사용자가 게임을 이해하기 쉬운 구성을 가지고 있으며, 순차적인 난이도 구성을 통해 사용자에게 지속적인 도전의식을 부여하여 안정적인 과금 설계 및 수익 모델 구축이 가능하다. 최근 중ž소 개발사들의 신규 게임 서비스 이후 생존이 점차 어려워지고 있으며, 이는 게임의 서비스 이후 체계적이고 효율적인 운영 솔루션 구축의 부재로 인한 결과로 유추가 가능하다. 본 연구에서는 모바일 게임의 글로벌 서비스를 위해 게임 사용자의 요구사항에 빠르게 대처하며, 개발 비용을 절감하고 업무의 효율성을 증가시킬 수 있도록 운영 툴을 설계하고 구현한다.

In this study, the effects of heat-moisture treatment (boiling or steaming for 45 min) prior to hot air drying (70 o C for 8 h) on water activity (Aw), moisture (MC), Brix, color, and texture of dried sweet potato slices were investigated to identify the best pretreatment condition for producing dried sweet potato with the best eating quality. Dried sweet potato slices pretreated by boiling (BL) showed significantly lower Aw, MC, and hardness while Brix was significantly higher than with steaming (ST) treatment. There were no significant differences for the color, springiness, cohesiveness, gumminess, and brittleness indexes. At 8 h drying, the Aw, MC, Brix, and hardness of the BL and ST samples were 0.81 and 0.82, 19.71% and 25.53%, 53.80% and 49.40%, and 20.49 kg/cm 2 and 31.98 kg/ cm 2 , respectively. This information will be useful for manufacturers in the production of dried sweet potato slices. These findings provide evidence of the feasibility of heat-moisture treatments in the production of dried sweet potato.