Silage inoculants, crucial in modern silage production, comprise beneficial microorganisms, primarily lactic acid bacteria (LAB), strategically applied to forage material during ensiling. This study aimed to compare the effectiveness of various inoculants produced by different companies. Five treatments were evaluated, including a control group: T1 (Lactobacillus plantarum), T2 (Lactobacillus plantarum + Pediococcus pentosaceus), T3 (Lactobacillus plantarum + Pediococcus pentosaceus + Lactobacillus buchneri), T4 (Lactobacillus plantarum + Lactobacillus acidophilus + Lactobacillus bulgaricus), and T5 (Lactobacillus plantarum + Pediococcus pentosaceus + Enterococcus faecium). Italian ryegrass was harvested at the heading stage and treated with these silage inoculants. Samples were collected over a 60-day ensiling period. Co-inoculation with L. plantarum and P. pentosaceus (T2) resulted in significantly higher CP compared to the control group co-inoculation exhibited with resulted in Lactobacillus plantarum and Pediococcus pentosaceus in the T2 treatment exhibited higher CP content of 106.35 g/kg dry matter (DM). The T3 treatment, which included heterofermentative bacterial strains such as Lactobacillus buchneri, exhibited an increase in acetic acid concentration (11.15 g/kg DM). In the T4 treatment group, which utilized a mixed culture of Lactobacillus acidophilus and Lactobacillus bulgaricus, the NH3-N/TN content was observed to be the lowest (20.52 g/kg DM). The T5 containing Enterococcus faecium had the highest RFV (123) after 60 days. Expanding upon these findings, the study underscores not only the beneficial effects of particular inoculant treatments on silage quality but also underscores the potential of customized inoculation strategies in maximizing nutrient retention and overall silage preservation.

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

Hypertension is characterized by excessive renin-angiotensin system activity, leading to blood vessel constriction. Several synthetic compounds have been developed to inhibit renin and angiotensin-converting enzyme (ACE). These drugs often have adverse side effects, driving the exploration of plant protein-derived peptides as alternative or supplementary treatments. This study assessed the phenolic compound and amino acid content and the antioxidant and antihypertensive activity of 5 South Korean staple crops. Sorghum had the highest phenolic compound content and exhibited the highest antioxidant activity. Millet grains, particularly finger millet (38.86%), showed higher antihypertensive activity than red beans (14.42%) and sorghum (17.16%). Finger millet was found to contain a large proportion of branched-chain, aromatic, and sulfur-containing amino acids, which are associated with ACE inhibition. In particular, cysteine content was positively correlated with ACE inhibition in the crops tested (r=0.696, p<0.01). This study confirmed that the amino acid composition was more correlated with the antihypertensive activity of grains than the phenolic compound content. Finger millet mainly contained amino acids, which have higher ACE inhibitory activity, resulting in the strongest antihypertensive activity. These findings underscore the antihypertensive potential of select crops as plant-based food ingredients, offering insight into their biological functions.

본 연구에서는 한국산 미기록속인 이마줄불청객파리속(신칭)과 미기록종인 작은눈이마줄불청객파리(신칭)를 처음으로 보고한다. 우리는 이 종이 포식성 거미의 섭식과정에 관여하는 phoretic relationship의 습성을 갖는 것을 확인하였다. 이 종의 성충에 대한 기재문과 사진 및 DNA바 코드 서열을 제공한다.

This study investigated the effects of exposure frequency, depth of processing, and activity repetition types on vocabulary learning. In total, 78 South Korean fifth-grade students were divided into four conditions. Students in each condition were asked to read a passage with four of the eight target words (exposure: four times) and the other four words (exposure: once) for three days, and to perform the vocabulary activities assigned to each condition. According to the results, exposure frequency and activity repetition type had significant effects on vocabulary learning. Activity repetition type also had a significant interaction effect with exposure frequency and depth of processing. Notably, presenting a word 12 times (4x3) in reading intervals had a more positive impact on vocabulary learning than presenting it three times (1x3), particularly when different vocabulary activities were repeated. Meanwhile, when the same activity was repeated, an activity with a higher depth of processing was more effective for vocabulary learning.

Air conditioner filters purify the air of indoor environments by removing air pollutants and supporting the efficiency of the unit’s cooling function. However, an air conditioner filter can become a microenvironment in which some fungi can grow as dust continues to accumulate and favorable humidity conditions are formed. Fungal growth in air conditioner filters could lead to fungal allergies or fungal diseases, in addition to emitting a foul odor. In an effort to understand what species causes this malodorous problem, we investigated the diversity of fungi found in air conditioners. Fungi were sampled from the collected air conditioner filters and grown on DG18 agar media. After purification for pure isolates, species identification was undertaken. Colony morphology was observed on PDA, MEA, CYA, and OA media. Microstructures of fruiting body, mycelia, and spores were examined using a light microscope. Molecular identification was performed by PCR and sequencing of PCR amplicons, and molecular phylogenetic analysis of sequenced DNA markers, including the Internal Transcribed Spacer (ITS), the 28S large subunit of the nuclear ribosomal RNA (LSU rDNA), the β-tubulin (BenA) gene, the Calmodulin (CaM) gene, and the DNA-directed RNA polymerase II subunit 2 (RPB2) gene. Through this identification process, we found two fungal species, Aspergillus miraensis and Dichotomopilus ramosissimus, which are unrecorded species in Korea. We will now report their morphological and molecular features.

가상의 공간에서 함께 즐기는 콘텐츠에 대해 관심이 늘어나고 있다. 더불어 가상공간에서 나만의 아바타도 꾸미고 게임 콘텐츠 역시 즐기고 있다. 이러한 가상의 공간을 메타버스라고 하며 대표적인 플랫폼으로는 제 페토와 로블록스가 있다. 메타버스 플랫폼은 플랫폼의 취지에 맞게 유저가 직접 제작하기 편리한 컨텐츠 제 작 도구를 지원한다. 그러나 일반 유저가 제작한 콘텐츠는 메타버스에서 활동하고 있는 다양한 유저의 관심 과 흥미를 지속적으로 유발하기에는 부족한 부분이 있어 꾸준한 흥행이 어렵다. 본 논문은 기존 게임 엔진을 활용해서 콘텐츠를 제작하는 콘텐츠 개발자로서 메타버스 플랫폼이 제공하는 제작 도구의 효용성을 검증하 고자 게임 엔진의 선택 기준을 참고하여 인터페이스, 개발 언어, 개발 공정의 기준으로 대표하는 플랫폼의 제작 도구를 비교하였다.

In this study, we examined the antagonistic effects of sprout-borne lactic acid bacteria (LAB) on Salmonella enterica serovar Enteritidis. This antagonism is promoted as a means of controlling contamination during sprout production and provides additional LAB for consumers. We isolated a total of 24 LAB isolates in nine species and five genera from seven popular vegetable sprouts: alfalfa (Medicago sativa), clover (Trifolium pratense), broccoli (Brassica oleracea ssp. italica), vitamin (B. rapa ssp. narinosa), red radish (Raphanus sativus), red kohlrabi (B. oleracea var. gongylodes), and Kimchi cabbage (B. campestris var. pekinensis). Based on 16S rRNA gene sequences, the LAB species were identified as Enterococcus casseliflavus, E. faecium, E. gallinarum, E. mundtii, Lactococcus taiwanensis, Leuconostoc mesenteroides, Pediococcus pentosaceus, and Weissella cibaria, and W. confusa. A total of 16 LAB isolates in seven species including E. faecium, E. gallinarum, E. mundtii, L. taiwanensis, L. mesenteroides, P. pentosaceus, and W. cibaria showed antagonistic activity toward S. enterica. The growth inhibition of sprout LAB on S. enterica was confirmed by co-culture. Unexpectedly, sprout LAB failed to suppress the growth of S. enterica in alfalfa sprouts, whereas all LAB strains stimulate S. enterica growth even if it is not significant in some strains. The findings of this study indicate that S. enterica-antagonistic LAB are detrimental to food hygiene and will contribute to further LAB research and improved vegetable sprout production.

행복은 인간이 추구하는 최고의 가치이자 선이다. 그러나 오늘날의 경영환경은 직원들에게 점점 더 많 은 자원을 요구하여 그들의 행복추구를 방해한다. 자원보존이론과 긍정정서의 구축 및 확장이론에 의하 면, 개인의 행복은 그들이 소유하고 있거나 획득할 수 있는 자원량에 비례하게 된다. 본 연구는 심리적 웰빙이라는 개념을 통해 조직 구성원의 행복을 살펴보고자 한다. 이 연구에서 저자는 먼저 심리적 웰빙의 정서적 측면과 자아실현적 측면을 구분한 다음, 목표 상황에 따라 이러한 측면이 어떻게 변화하는지 살펴 본다. 목표설정이론에 근거하여 목표달성을 위해 자기규제를 할 경우 이를 통해 자아실현적 측면의 심리 적 웰빙을 증진할 수 있지만, 동시에 상실되는 자원을 통해 정서적 웰빙이 침해될 수 있다. 목표가 불명확 할 경우 목표달성가능성이 줄어들어 개인은 회피적 자기규제를 통해 자원손실을 줄이게되고 이를 통해 정서적 웰빙을 보호하지만 자아실현적 웰빙은 감소할 수 있다. 본 논문은 또한 상사근접관리로 인한 강제 적 규제상황을 가정하여 조절효과를 확인하였다. 12개 조직의 데이터를 수집하여 통계적으로 검증하였다. 그 결과 목표의 난이도와 모호성은 직원의 자기조절 전략을 통해 심리적 웰빙을 변화시키며, 이러한 경향 은 상사근접관리에 의해 조절되는 것으로 나타났다. 그리고 심리적 웰빙의 이 두 가지 측면이 갖는 이론 적 및 실무적 시사점에 대해서도 논하였다.

One of the important components of a nuclear fuel cycle facility is a hot cell. Hot cells are engineered robust structures and barriers, which are used to handle radioactive materials and to keep workers, public, and the environment safe from radioactive materials. To provide a confinement function for these hot cells, it is necessary to maintain the soundness of the physical structure, but also to maintain the negative pressure inside the hot cell using the operation of the heating, ventilation, and air conditioning (HVAC) systems. The negative pressure inside the hot cells allows air to enter from outside hot cells and limits the leakage of any contaminant or radioactive material within the hot cell to the outside. Thus, the HVAC system is one of the major components for maintaining this negative pressure in the hot cell. However, as the facility ages, all the components of the hot cell HVAC system are also subject to age-related deterioration, which can cause an unexpected failure of some parts. The abnormal operating condition from the failure results in the increase of facility downtime and the decrease in operating efficiency. Although some major parts are considered and constructed in redundancy and diversity aspects, an unexpected failure and abnormal operating condition could result in reduction of public acceptance and reliability to the facility. With the advent of the 4th Industrial Revolution, prognostics and health management (PHM) technology is advancing at a rapid pace. Korea Hydro & Nuclear Power, Siemens, and other companies have already developed technologies to constantly monitor the integrity of power plants and are applying the technology in the form of digital twins for efficiency and safety of their facility operation. The main point of PHM, based on this study, is to monitor changes and variations of soundness and safety of the operation and equipment to analyze current conditions and to ultimately predict the precursors of unexpected failures in advance. Through PHM, it would be possible to establish a maintenance plan before the failure occurs and to perform predictive maintenance rather than corrective maintenance after failures of any component. Therefore, it is of importance to select appropriate diagnostic techniques to monitor and to diagnose the condition of major components using the constant examination and investigation of the PHM technology. In this study, diagnostic techniques are investigated for monitoring of HVAC and discussed for application of PHM into nuclear fuel cycle facilities with hot cells.

The thermal treatment of radioactive waste attracts great attention. The thermal treatment offers lots of advantages, such as significant volume reduction, hazard reduction, increase of disposal safety, etc. There are various thermal technologies to waste. The developed technologies are calcination, incineration, melting, molten salt oxidation, plasma, pyrolysis, synroc, vitrification, etc. The off-gas treatment system is widely applied in the technologies to increase the safety and operation efficiency. The thermal treatment generates various by-product and pollutants during the process. The dust or fly ash are generated as a particulate from almost every radioactive waste. The treatment of PVC related components generates hydrogen chloride, which usually brings corrosion of facility. The treatment of rubber and spent resin generates sulfur oxide, SOx. The treatment of nitrile rubber generates nitrogen oxide, NOx. The incomplete combustion of radioactive waste usually generates carbon oxide, COx. The process temperature also affects the generation of off gas, such as NOx and/or COx. Various off gas treatment components are organized for the proper treatment of the previously mentioned materials. In this study systematical review on off gas treatment will be reported. Also, worldwide experiences and developed facility will be reported.

The primary purpose of high temperature process of radioactive waste is to satisfy the waste acceptance criteria and volume reduction. The WAC offers the guideline of waste form fabrication process. The WAC is defined as quantitative or qualitative criteria specified by the regulatory body, or specified by and operator and approved by the regulatory body, for radioactive waste to be accepted by the operator of a repository for disposal, or by the operator of a storage facility for storage. The main objective of WAC is to protect staff and general public and environment by the containment of radioactive material, limit external radiation level, and prevent criticality. The WAC also offers systematic management of radioactive waste by standardization of waste management operations, facilitation waste tracking, ensure safe and effective operation of operating facilities, etc. Since the high temperature process for radioactive waste is considered in many countries, lots of codes and standards are considered. In many WACs, compressive strength, thermal cycle stability, radiation exposure stability, free liquid, and leachability are evaluation to understand the effect of solidified form to the disposal facility. In this paper, systematical review on waste form will be discussed. In addition, brief result of characterization of waste form will be compared.

During the operation of nuclear power plant (NPP), the concentrates and spent resin are generated. They show relatively high radioactivity compared to other radioactive waste, such as dry active waste, charcoals, and concrete wastes. The waste acceptance criteria (WAC) of disposal facility defines the structure and property of treated waste. The concentrates and spent resin should be solidified or packaged in high integrity container (HIC) to satisfy the WAC in Korea. The Kori NPP has stored history waste. The large concrete package with solidified concentrates and spent resin. The WAC requires identification of 18 properties for the radioactive waste. Since some of the properties are not clearly identified, the large concrete packages could not satisfy the WAC in this moment. The generation of the large concrete package (rectangular type and cylindrical type), pretreatment of the package, treatment of inner drum, process development for clearance waste, etc. will be discussed in this paper. In addition, the conceptual design of whole treatment process will be discussed.

For efficient design and manufacture of PWR spent fuel burnup detector, data simulated with various condition of spent fuel in the NPP storage pool is required. In this paper, to derive performance requirements of spent fuel burnup detector for neutron flux and dose rates were evaluated at various distances from CE16 and WH17 types of fuel, representatively. The evaluation was performed by the following steps. First, the specifications of the spent fuel, such as enrichment, burnup, cooling time, and fuel type, were analyzed to find the conditions that emit maximum radioactivity. Second, gamma and neutron source terms of spent fuel were analyzed. The gamma source terms by actinides and fission products and neutron source terms by spontaneous and (α, n) reactions were calculated by SCALE6 ORIGAMI module. Third, simulation input data and model were applied to the evaluation. The material composition and dose conversion factor were referred as PNNL-15870 and ICRP-74 data, respectively and dose rates were displayed with the MCNP output data. It was assumed that there was only one fuel modeled by MCNP 6.2 code in pool. The evaluation positions for each distance were selected as 5 cm, 10 cm, 25 cm, 50 cm, and 1 m apart from the side of fuel, respectively. Fourth, neutron flux and dose rates were evaluated at distance from each fuel type by MCNP 6.2 code. For WH 17 types with a 50 GWd/MTU burnup from 5 cm distance close to fuel, the maximum neutron flux, gamma dose rates and neutron dose rates are evaluated as 1.01×105 neutrons/sec, 1.41×105 mSv/hr and 1.61×101 mSv/hr, respectively. The flux and dose rate of WH type were evaluated to be larger than those of CE type by difference in number of fuel rods. The relative error for result was less than 3~7% on average secured the reliability. It is expected that the simulated data in this paper could contribute to accumulate the basic data required to derive performance requirements of spent fuel burnup detector.

Safeguards systems and measures are determined through diversion scenario analysis based on the facility design information submitted to the IAEA when a new nuclear facility is introduced. While the concept of safeguards-by-design (SBD), which considers the safeguards from the design phase for a facility operator to minimize unplanned changes or disruption to facility operations as well as for the IAEA to increase the efficiency and effectiveness in safeguards implementation, has been emphasized for more than a decade, there is no practical tool or guidance on how to apply it. In this study, we develop a diversion path analysis tool and introduce how to apply SBD using it. A diversion path analysis tool was developed based on the elements that constitute diversion and the algorithm generated based on the initial information of facility and nuclear material flow. The results of utilizing the analysis tool depending on a different level of facility information and the safeguards set-ups were compared through examples. Taking a typical light water reactor as an example, the test analyzed the automatic generation of dedicated routes, configuration of safeguards measures, and diversion path analysis. Through this, the application and limitations of the analysis tool are discussed, and ideas for utilization according to the SBD concept and necessary regulatory guidance are proposed. The results of this study are expected to be directly utilized to domestic nuclear control during the regulation process for a construction of new nuclear power systems, and furthermore, to enhance national credibility in the engagement with the IAEA for implementation of safeguards.

증산은 적정 관수 관리에 중요한 역할을 하므로 수분 스트레스에 취약한 토마토와 같은 작물의 관개 수요에 대한 지식이 필요하다. 관수량을 결정하는 한 가지 방법은 증산량을 측정하는 것인데, 이는 환경이나 생육 수준의 영향을 받는다. 본 연구는 분단위 데이터를 통해 수학적 모델과 딥러닝 모델을 활용하여 토마토의 증발량을 추정하 고 적합한 모델을 찾는 것을 목표로 한다. 라이시미터 데이터는 1분 간격으로 배지무게 변화를 측정함으로써 증산 량을 직접 측정했다. 피어슨 상관관계는 관찰된 환경 변수가 작물 증산과 유의미한 상관관계가 있음을 보여주었다. 온실온도와 태양복사는 증산량과 양의 상관관계를 보인 반면, 상대습도는 음의 상관관계를 보였다. 다중 선형 회귀 (MLR), 다항 회귀 모델, 인공 신경망(ANN), Long short-term memory(LSTM), Gated Recurrent Unit(GRU) 모델을 구 축하고 정확도를 비교했다. 모든 모델은 테스트 데이터 세트에서 0.770－0.948 범위의 R2 값과 0.495mm/min－ 1.038mm/min의 RMSE로 증산을 잠재적으로 추정하였다. 딥러닝 모델은 수학적 모델보다 성능이 뛰어났다. GRU 는 0.948의 R2 및 0.495mm/min의 RMSE로 테스트 데이터에서 최고의 성능을 보여주었다. LSTM과 ANN은 R2 값이 각각 0.946과 0.944, RMSE가 각각 0.504m/min과 0.511로 그 뒤를 이었다. GRU 모델은 단기 예측에서 우수한 성능 을 보였고 LSTM은 장기 예측에서 우수한 성능을 보였지만 대규모 데이터 셋을 사용한 추가 검증이 필요하다. FAO56 Penman-Monteith(PM) 방정식과 비교하여 PM은 MLR 및 다항식 모델 2차 및 3차보다 RMSE가 0.598mm/min으로 낮지만 분단위 증산의 변동성을 포착하는 데 있어 모든 모델 중에서 가장 성능이 낮다. 따라서 본 연구 결과는 온실 내 토마토 증산을 단기적으로 추정하기 위해 GRU 및 LSTM 모델을 권장한다.

농가에서 곤충자원을 활용한 치유농업프로그램의 개발 요구가 증가함에 따라 기존 곤충 돌보기 중심의 치유프로그램과 더불어 활용할 수 있는 야간 곤충채집 활동을 치유농업프로그램으로 개발하 고 시범 적용하였다. 야간곤충채집 활동은 대학생 9명에게 사전에 참여 동의를 획득하고, 전남대학교 학술림(장성)에서 1박 2일간 진행하였다. 18시부터 24시까지 야간 채집 활동과 익일 오전에는 채집한 곤충을 이용한 곤충 표본 제작 활동으로 프로그램을 구성하였다. 프로그램의 효과 분석을 위해 사전 (활동 전), 중간(채집활동 직후), 사후(표본제작 직후)에 뇌파, 맥파 검사 그리고 설문조사를 실시하였 다. 뇌파 분석 결과, 야간 채집활동 직후 뇌파의 기초율동이 향상(10.67→11.44)하였다(p<0.05). 요인 분석을 통한 스트레스 분석 결과, 내적 스트레스는 3.22(사전)→2.96(사후)로 감소(p<0.1)하였고, 문제 수행능력 관련 스트레스는 2.92(중간)→2.70(사후)로 감소하였다. 이러한 결과는 야간 채집 활동 속에 서 이용되는 근육의 움직임이 뇌 기능 향상과 스트레스 감소에 영향을 줄 것으로 생각된다. 참여자가 적은 연구의 한계를 극복하기 위해 향후 연령대별, 성별 등 다양한 참여자를 대상으로 추가적인 채집 프로그램의 개발 및 적용이 필요하다.

본 연구는 주변 환경의 차이에 따른 화분매개곤충의 유입 특성을 파악하기 위하여 국립수목원 내 진화속을걷 는정원과 부추속전문전시원에 식재된 울릉산마늘의 화분매개곤충을 조사하였다. 2023년 5월 22일부터 6월 2일 까지 꽃이 70% 이상 개화하였을 때 포충망을 활용하여 8일간 곤충을 채집하였고, 각 전시원 별 식생(피도), 기후 (온도·습도·조도)를 조사하였다. 조사 결과 진화속을걷는정원에서 피도 60% 온도 26.4℃, 습도 31.5%, 조도 40953.6lx, 화분매개곤충 20과 450개체, 부추속전문전시원은 피도 90%, 온도 25.6℃, 습도 31.6%, 조도 6387lx, 화분매개곤충 15과 196개체로 나타났다. 온도와 조도가 상대적으로 높은 진화속을걷는정원이 채집된 곤충의 다양성과 방문 빈도가 높았다. 시간대별 곤충의 방문 빈도를 비교해본 결과 온도와 조도는 개체수가 증가할 때 같이 증가하는 경향을 보였으며, 습도는 반대의 경향을 보였다.

We analyzed comparatively the ground beetle communities of 1993 and 2023, with 30 year interval, in broadleaf and coniferous stands of the Gwangneung forest, a biosphere reserve in South Korea. 2,906 individuals (53 species, 38 genera, and 15 families) were collected from broadleaf stands and 1,782 individuals (36 species, 32 genera, and 14 families) from coniferous stands in 1993. The dominant species was Synuchus cycloderus in both stands. In 2023, 1,682 individuals (110 species, 78 genera, 21 families) were collected from broadleaf stands and 990 individuals (92 species, 67 genera, 22 families) from coniferous stands. In 2023, the dominant species were Eucarabus (Parhomopterus) sternbergi sternbergi in broadleaf stands and Coptolabrus jankowskii jankowskii in coniferous stands. Species richness (R'), species evenness (E'), species diversity (H'), and dominance (DI) were all higher than in broadleaf (R'=15.472, E'=0.336, H'=1.601, and DI=0.371) and coniferous (R'=13.756, E'=0.369, H'=1.324, and DI=0.326) forests in 2023.

Until now, in case of Palaearctic region, only one species, Nesendaeus monochrous in this genus was recorded from China. but the biology and life cycle are not clearly known, yet. This species collected from the bud of Glochidion chodoense in Korea for the first time and closely related to Heterochyromera imerodeus Kojima & Morimoto which was recorded only in Japan,. But Nesendaeus monochrous is easily distinguishable from H. imerodeus by the relatively longer elytra with bisinuately round apices. Heterochyromera imerodeus Kojima & Morimoto can be found from Eurya emarginata and Glochidion obovatum in Japan. So, this two species are closely related each other and need more taxonomic study about the generic synonymy or changing the generic position.