살충제 저항성 목화진딧물 집단(완주, 춘천, 고성)에 대한 3종(afidopyropen, chlorfenapyr, cyantraniliprole) 약제별 감수성과 혼용에 따른 방제 효과를 평가하였다. 3개 야외집단에 대해서 3약제 모두100배 이상의 저항성비를 보였다. 혼합제의 협력작용을 평가하기 위해 반수치사농도(LC50) 을 이용한 조합지수(CI), %M(synergism), 연합독성계수(CTC), 와들리 비율(WR), 상승비율(SR)와 사충률을 이용한 아보트 비율(AR)로 비교하였 다. Afidopyropen + chlorfenapyr은 모든 야외집단에 대해서 살충활성의 증가를 보였고, chlorfenapyr + cyantraniliprole, afidopyropen + cayntraniliprole은 완주, 춘천 집단에 대해서 살충활성의 증가를 보였다. 그러나 chlorfenapyr + cyantraniliprole (CI, 1.63; %M(synergism), 30; CTC, 64.0; WR, 0.6, AR, 0.54)과 afidopyropen + cyantraniliprole (CI, 6.7; %M(synergism), 1; CTC, 19.8; WR, 0.2, AR ≤ 0.55)은 고성 집단에 서 길항작용을 나타내었다. 포장조건에서도 afidopyropen + chlorfenapyr, chlorfenapyr + cyantraniliprole, afidopyropen + cyantraniliprole 은 99% 이상의 높은 방제가를 보여 향후 살충제 저항성 목화진딧물 방제용 혼합제 개발에 유용하게 활용될 것이다.

복숭아혹진딧물(Myzus persicae)은 다식성으로 담배, 감자, 고추, 배추, 복숭아 등에 심각한 피해를 입히는 대표적인 농업해충이다. 본 연구에 서는 국내 복숭아혹진딧물 야외개체군의 λ-cyhalothrin, imidacloprid 및 flupyradifurone에 대한 약제 저항성 발달 수준과 점 돌연변이(R81T, L1014F, M918L)의 발생 여부를 확인하였다. 또한, qRT-PCR을 통해 사이토크롬 P450 유전자인 CYP6CY3 발현량을 확인하였다. 그 결과, λ -cyhalothrin은 저항성비(Resistance Ratio, RR)가 12개 모든 지역이 > 200으로 높은 저항성을 보였다. Imidacloprid와 flupyradifurone은 YS, UR, HY, 그리고 WJ 개체군에서 > 200의 저항성비로 높은 저항성을 나타냈다. R81T는 12개 집단 중 약 50%, L1014F는 약 33.3%, M918L은 100%에서 발현하였다. 또한 qRT-PCR을 통해 imidacloprid 저항성 개체에서 subunit CYP6CY3의 발현량이 높게 나타난 것을 확인하였다. 이러 한 결과는 M918L 점 돌연변이는 λ-cyhalothrin 저항성 진단마커로, R81T와 CYP6CY3의 높은 발현은 imidacloprid 저항성 진단마커로 활용이 가능하다는 것을 시사한다.

Fungal contaminant in the indoor air is one of risk factors that could damage valuable paper-based records preserved in libraries. In the process of monitoring airborne fungi at the Nara Repository, the National Archives, Seoul, Korea, three fungal strains, DUCC 16098, DUCC 17764, and DUCC17767 were isolated from the archive’s air samples. Fungal identification was performed based on the morphological characteristics and phylogenetic analysis of the internal transcribed spacer (ITS), the 28S LSU rDNA, and β-tubulin gene (BenA), and TEF1-α gene. These DUCC 16098, DUCC 17764 and DUCC17767 strains were identified as Clonostachys farinosa, Penicillium cosmopolitanum, and Cephalotrichum purpureofuscum. These species have not been recorded before in Korea. Information on these fungi will help the monitoring and management of airborne fungi in the archival facilities.

The demand for transportation is increasing due to the continuous generation of radioactive wastes. Especially, considering the geographical characteristics of Korea and the location characteristics of nuclear facilities, the demand for maritime transportation is expected to increase. If a sinking accident happens during maritime transportation, radioactive materials can be released into the ocean from radioactive waste transportation containers. Radioactive materials can spread through the ocean currents and have radiological effects on humans. The effect on humans is proportional to the concentration of radioactive materials in the ocean compartment. In order to calculate the concentration of radioactive materials that constantly flow along the ocean current, it is necessary to divide the wide ocean into appropriate compartments and express the transfer processes of radioactive materials between the compartments. Accordingly, this study analyzed various ocean transfer evaluation methodologies of overseas maritime transportation risk codes. MARINRAD, POSEIDON, and LAMER codes were selected to analyze the maritime transfer evaluation methodology. MARINRAD divided the ocean into two types of compartments that water and sediment compartments. And it was assumed that radionuclides are transfered from water to water or from water to sediment. Advection, diffusion, and sedimentation were established as transfer process for radionuclides between compartments. MARINRAD use transfer parameters to evaluate transer processes by advection, diffusion, and sedimentation. Transfer parameters were affected by flow rate, sedimentation rate, sediment porosity, and etc. POSEIDON also divided the ocean into two types that water and sediment compartment, each compartments was detaily divided into three vertical sub-compartment. Advection, diffusion, resuspension, sedimentation, and bioturbation were established as transport processes for radionuclides between compartments. POSEIDON also used transfer parameters for evaluating advection, diffusion, resuspension, sedimentation, and bioturbation. Transfer parameters were affected by suspended sediment rates, sedimentation rates, vertical diffusion coefficients, bioturbation factors, porosity, and etc. LAMER only considered the water compartment. It divided the water compartment into vertical detailed compartments. Diffusion, advection and sedimentation were established as the nuclide transfer processes between the compartments. To evaluated the transfer processes of nuclides for diffusion and advection, LAMER calculated the probability with generating random position vectors for radionuclides’ locations rather than deterministic methods such as MARINRAD’s transfer parameters or POSEIDON’s transfer rates to evaluate transfer processes. The results of this study can be used as a basis for developing radioactive materials’ ocean transfer evaluation model.

주변 국가인 태국, 캄보디아, 베트남, 라오스 등에서 벼멸구(Nilaparvata lugens)와 흰등멸구(Sogatella furcifera)를 채집하던 중, 벼멸구와 형태가 아주 유사한 이삭멸구(N. muiri)와 벼멸구붙이(N. bakeri), 그리고 흰등 멸구와 형태가 아주 유사한 흰등멸구붙이(S. kolophon), 피멸구(S. vibix) 그리고 애멸구(Laodelphax striatellus)가 동시에 채집이 되는 등 형태적 차이점이 거의 없어 전문가도 쉽게 구분하지 못하는 문제가 있음이 확인되었다. 따라서 형태가 유사한 상기 멸구류의 종 동정을 확실히 할 수 있는 PCR용 프라이머의 개발을 위해 벼멸구 및 흰등멸구의 미토콘드리아 내 COI 영역을 특이적으로 검출할 수 있는 프라이머 세트를 제작하고 종 동정 효과를 확인하였다.

High-entropy alloys (HEAs) are attracting attention because of their excellent properties and functions; however, they are relatively expensive compared with commercial alloys. Therefore, various efforts have been made to reduce the cost of raw materials. In this study, MIM is attempted using coarse equiatomic CoCrFeMnNi HEA powders. The mixing ratio (powder:binder) for HEA feedstock preparation is explored using torque rheometer. The block-shaped green parts are fabricated through a metal injection molding process using feedstock. The thermal debinding conditions are explored by thermogravimetric analysis, and solvent and thermal debinding are performed. It is densified under various sintering conditions considering the melting point of the HEA. The final product, which contains a small amount of non-FCC phase, is manufactured at a sintering temperature of 1250oC.

The number of dismantled nuclear facilities is increasing globally. Dismantling of nuclear facilities generates large amount of waste such as concrete, soil, and metal. Concrete waste accounts for 70% of the total amount of waste. Since hundreds of thousansds of tons of concrete waste generated, securing technology of reduction and recycling of waste is emerging as a very important issue. The objective of this study is to synthesize geopolymer using inorganic materials from cement fine powder in concrete waste. Dismantled concrete waste contains a large amount of calcium silicate hydrate(C-S-H), Ca(OH)2, SiO2, etc., which is an inorganic material required for the synthesis of geopolymer. SiO2 affects the compressive strength of the geopolymer and Ca(OH)2 affects the curing rate. A high concentration of alkali solution is used as an alkali activator, and alkali activator is necessary for the polymerzation reaction of metakaolinite. The experiment consists of three steps. The first step is to react with concrete waste and hydrochloric acid to extract ions. In the solid after filtration, SiO2 and Al2O3 are composed of 84.10%. It can be used instead of commercial SiO2 required for the synthesis of geopolymer. The second step is to add NaOH up to pH 10, impurities can be removed to extract Ca(OH)2 with high purity. The final step is to add NaOH up to pH 13, and Ca(OH)2 extraction. The alkali solution generated after the last reaction can be recycled into an alkali activator during the synthesis of the geopolymer. If dismantled concrete waste is recycled during geopolymer synthesized, the volume reduction rate of dismantled concrete waste is more than 50%. If you put the radioactive waste in the recycled solidification materials synthesis from concrete waste by dismantling of nuclear facilities, it is possible to reduce the amount of waste generated and disposal costs.

Kori-1, the nuclear power plants in South Korea, first started operation in April 1978 and was suspended permanently in 2017. The saturation rate time of spent nuclear fuel generated by major nuclear power plants operating in Korea are getting closer. If we fail to dispose spent nuclear fuel, which is equivalent to high-level radioactive waste, the nuclear power plants will have to be shutdown. High-level radioactive waste is permanently disposed through a deep geological disposal system because it contains long-term half-life nuclides and emits high energy. To select the deep geological disposal site and construct the disposal facilities, it is necessary to establish appropriate regulatory policies accordingly. The status of database construction in OECD-NEA, NRC, SITEX, and IAEA, which provides safety regulations for deep geological disposal system, stipulates each requirement for dismantling nuclear power plants. However, details such as specific figures are not specified, and guidelines for the disposal of high-level radioactive wastes are not clearly distinguished. In Korea, the CYPRUS program, an integrated database system, has been developed to support comprehensive performance evaluation for high-level waste disposal. However, due to several difficult situations, maintenance and upgrades have not been performed, so the research results exist only in the form of raw data and the new research results have not been reflected. Other than that, there is no preemptive basis for regulating the deep geological disposal system. With real-time database, we can develop a regulatory system for the domestic deep disposal system by systematically analyzing the regulatory condition and regulatory case data of international organizations and foreign leading countries. The database system processed and stored primary data collected from nuclear safety reports and other related data. In addition, we used relational database and designed table to maximize time and space efficiency. It is provided in the form of a web service so that multiple users can easily find the data they want at the same time. Based on these technologies, this study established a database system by analyzing the legal systems, regulatory standards, and cases of major foreign leading countries such as Sweden, Finland, the United States, and Japan. This database aims to organize data for each safety case component and further prepare a safety regulatory framework for each stage of development of disposal facilities suitable for the domestic environment.

An 8-year-old, spayed female Maltese dog was presented with a one-month history of erythema, swelling and alopecia of periocular region with pruritus. The skin lesions were first detected at the age of three years, but this was the first time that symptoms had appeared in the eyes. Physical examination revealed markedly swollen and erythematous eyelids and conjunctiva including Meibomian glands. In addition, periocular alopecia and tears were identified. Slit lamp microscopy revealed erythema of conjunctiva and swelling of Meibomian glands. The Schirmer’s tear test was normal. Impression smear cytology of eyes revealed sterile neutrophils and corneal epithelial cells. There were no virus or bacterial infections in the eyes. On skin examination, generalized erythema was detected but there were no other skin lesions. A case of allergic blepharoconjunctivitis associated with canine atopic dermatitis was diagnosed based on history taking and skin examination. Treatment included cetirizine, cyclosporine, prednisolone and Forus eye drops®. The owner was instructed to wear an Elizabethan collar around his dog's neck at all times and restrict walking. And the diet was changed to hypoallergenic dog food. Medications and environmental restrictions significantly reduced erythema, edema and swelling of meibomian glands. Pruritus was also decreased. Six weeks later, the edema lesions of eyes disappeared.

절화장미 삽목묘 대량생산 효율을 높이기 위해 국내 육성 절화장미 ‘엔틱컬’(Rosa hybrida ‘Antique Curl’)을 대상으로 생장 활력이 높은 단경삽목묘 주요 절위를 분석하였다. 화경으로부터 순서대로 5매엽 이상을 가진 마디 6개를 삽목(6 절위, Level 1~6)하여 온실과 생장환경조절실에서 각각 30일간 관리 하였다. 그 결과, 삽목 절위가 기부 쪽으로 내려갈수록 발근율과 액아 생장이 억제되었고, 삽수 잎의 황화 및 낙엽 현상이 조기에 나타났다. 잎의 탄수화물 함량은 발근과 신초발아율에 영향을 주지 않았다. 온실환경에서 1~3 절위, 생장환경조절실 에서 1~2 절위의 생장이 가장 우수하였고, 모두 4절위까지는 정상적인 생장을 보였다. 결과적으로 상업용 장미 시설 생산에서 대량삽목번식을 할 때 화경으로부터 5매엽을 가진 네번 째 마디(level 4)까지 가능할 것으로 확인되었다.