This paper presents a path planning optimization model for the engineering units to install obstacles in the shortest time during wartime. In a rapidly changing battlefield environment, engineering units operate various engineering obstacles to fix, bypass, and delay enemy maneuvers, and the success of the operation lies in efficiently planning the obstacle installation path in the shortest time. Existing studies have not reflected the existence of obstacle material storage that should be visited precedence before installing obstacles, and there is a problem that does not fit the reality of the operation in which the installation is continuously carried out on a regional basis. By presenting a Mixed Integrer Programming optimization model reflecting various constraints suitable for the battlefield environment, this study attempted to promote the efficient mission performance of the engineering unit during wartime.

This study aimed to investigate the viewing experience of Taekwondo competitions, compare and analyze the viewing experience according to the type of Taekwondo competition, derive the viewing experience structure of Taekwondo contents, and confirm the potential of Power Taekwondo as a sustainable sports content developed for the purpose of popularizing Taekwondo.

This paper addresses the maintenance optimization problem in multi-component systems in which parts are connected in series, carrying out several missions interspersed with scheduled finite breaks. Due to limited time or resources, maintenance actions can be only carried out on a limited set of components. The decision maker then has to decide which components to maintain to ensure a pre-specified performance level during next mission. Most of the existing models in the literature usually assume only one system and enough spare parts. However, there are situations in which maintenance is required for multiple systems of the same type. To overcome this restrictive assumption, this study optimizes the maintenance problem considering the lack of repair parts and cannibalism for many identical systems. This study presents two optimization models with different objectives to solve the problem and analyzes the results so that the decision maker can decide. The results of this study are expected to be used for the maintenance of multiple systems of the same type, such as swarm drones.

Breakthrough analysis has widely been explored for the dynamic separation of gaseous mixtures in porous materials. In general, breakthrough experiments measure the components of a flowing gas when a gaseous mixture is injected into a column filled with an adsorbent material. In this paper, we report on the design and fabrication of a breakthrough curve measurement device to study the dynamic adsorptive separation of hydrogen isotopologues in porous materials. Using the designed system, an experiment was conducted involving a 1:1 mixture of hydrogen and deuterium passed through a column filled with zeolite 13X (1 g). At room temperature, both hydrogen and deuterium were adsorbed in negligible amounts; however, at a temperature of 77 K, deuterium was preferentially adsorbed over hydrogen. The selectivity was different from that in the existing literature due to the different sample shapes, measurement methods, and column structures, but was at a similar level to that of cryogenic distillation (1.5).

본 연구는 전라북도 순창군 복흥면 추령천 일대에서 2006년 2월부터 2007년 5월까지 가시납지리의 개체군 생태조사를 실시하였다. 가시납지리는 물의 흐름이 느리고 하상이 주로 모래, 뻘, 잔자갈의 비율이 높은 수역에서 서식하였다. 체장빈도분 포법으로 연령을 추정한 결과, 체장 30~46㎜ 군은 만 1년생, 47~58㎜ 군은 만 2년생, 59~68㎜ 군은 만 3년생, 69㎜ 이상 군은 만 4년생 이상으로 추정되었다. 생식소성숙도지수(GSI)는 3월(암: 12.9%, 수: 5.0%)에 가장 높았고, 산란관길이/체 장(Ovipositor length/Standard length)의 비율(%)은 4월(46.3%)에 가장 높았다. 성숙란인 1.6㎜ 이상 크기의 난경이 차지하 는 비율은 5월(13.2%)에 가장 높게 나타났다. 산란기 특성을 종합적으로 분석한 결과 산란기는 3월부터 6월까지로 추정되었고 (수온 11.5~22.5℃) 조사기간 동안 성비는 1:1.13(♀:♂)이었다. 포란수는 318±174.5 (50~583)개, 성숙란수는 220±139.2 (50~406)개, 성숙난의 크기는 장경 2.04±0.110㎜, 단경 1.55±0.100㎜으로 나타났다. 가시납지리의 주요 먹이생물은 규조류 (Bacilariophyceae)의 Fragilaria, Synedra, Navicular, Cymbella 등과 녹조류(Chlorophyceae)의 Cosmarium 같은 식물 성플랑크톤이 주로 관찰되었다.

The magnetocaloric effect (MCE), which is the reversible temperature change of magnetic materials due to an applied magnetic field, occurs largely in the vicinity of the magnetic phase transition temperature. This phenomenon can be used to induce magnetic refrigeration, a viable, energy-efficient solid-state cooling technology. Recently, Metal-organic frameworks (MOFs), due to their structural diversity of tunable crystalline pore structure and chemical functionality, have been studied as good candidates for magnetic refrigeration materials in the cryogenic region. In cryogenic cooling applications, MCE using MOF can have great potential, and is even considered comparable to conventional lanthanum alloys and magnetic nanoparticles. Owing to the presence of large internal pores, however, MOF also exhibits the drawback of low magnetic density. To overcome this problem, therefore, recent reports in literature that achieve high magnetic entropy change using a dense structure formation and ligand tuning are introduced.

Recent development in science and technology has modernized the weapon system of ROKN (Republic Of Korea Navy). Although the cost of purchasing, operating and maintaining the cutting-edge weapon systems has been increased significantly, the national defense expenditure is under a tight budget constraint. In order to maintain the availability of ships with low cost, we need accurate demand forecasts for spare parts. We attempted to find consumption pattern using data mining techniques. First we gathered a large amount of component consumption data through the DELIIS (Defense Logistics Intergrated Information System). Through data collection, we obtained 42 variables such as annual consumption quantity , ASL selection quantity, order-relase ratio. The objective variable is the quantity of spare parts purchased in f-year and MSE (Mean squared error) is used as the predictive power measure. To construct an optimal demand forecasting model, regression tree model, randomforest model, neural network model, and linear regression model were used as data mining techniques. The open software R was used for model construction. The results show that randomforest model is the best value of MSE. The important variables utilized in all models are consumption quantity, ASL selection quantity and order-release rate. The data related to the demand forecast of spare parts in the DELIIS was collected and the demand for the spare parts was estimated by using the data mining technique. Our approach shows improved performance in demand forecasting with higher accuracy then previous work. Also data mining can be used to identify variables that are related to demand forecasting.

In the defense acquisition, a company’s goal is to maximize profits, and the government’s goal is to allocate budgets efficiently. Each year, the government estimates the ratio of indirect cost sector to defense companies, and estimates the ratio to be applied when calculating cost of the defense articles next year. The defense industry environment is changing rapidly, due to the increasing trend of defense acquisition budgets, the advancement of weapon systems, the effects of the 4th industrial revolution, and so on. As a result, the cost structure of defense companies is being diversifying. The purpose of this study is to find an alternative that can enhance the rationality of the current methodology for estimating the ratio of indirect cost sector of defense companies. To do this, we conducted data analysis using the R language on the cost data of defense companies over the past six years in the Defense Integrated Cost System. First, cluster analysis was conducted on the cost characteristics of defense companies. Then, we conducted a regression analysis of the relationship between direct and indirect costs for each cluster to see how much it reflects the cost structure of defense companies in direct labor cost-based indirect cost rate estimates. Lastly a new ratio prediction model based on regularized regression analysis was developed, applied to each cluster, and analyzed to compare performance with existing prediction models. According to the results of the study, it is necessary to estimate the indirect cost ratio based on the cost character group of defense companies, and the direct labor cost based indirect cost ratio estimation partially reflects the cost structure of defense companies. In addition, the current indirect cost ratio prediction method has a larger error than the new model.

Development of transportation is rapidly reducing the barriers between countries, but this is causing the easier migration of species than the past. Typically, exotic species are imported for the purpose of food, leather, and pets. However, it has been introduced into the wild through artificially or naturally paths, and recently they are become a main cause of ecosystem disturbance. In this study, we investigated exotic turtle species introduced into the wild and analyzed their distribution characteristics. As a result of filed surveys, totally 4 genus 8 species 62 individuals of exotic turtles were found from 126 reservoirs in Gangwon-do and Gyeongsangnam-do, South Korea. In particular, Trachemys scripta elegans showed relatively high frequency than other turtle species and the natural reproduction of T. s. elegans was confirmed in some areas. On the other hand, the frequency of discovery of exotic turtles except T. s. elegans was relatively low, and the range of the areas was limited. Especially, exotic turtles except T. s. elegans were mainly found in public places such as reservoirs in the park. As a result of analyzing the distribution characteristics of exotic turtles using geographic information system, the turtles’ distribution showed a high correlation with the artificial factor such as “urban”. In this study, we identified the distribution characteristics of exotic turtles in the Korean wild, and these results will be important data for understanding status the and establishing effective management methods for exotic species.

This paper deals with rescheduling on unrelated parallel-machines with compressible processing times, assuming that the arrival of a set of new jobs triggers rescheduling. It formulates this rescheduling problem as an assignment problem with a side constraint and proposes a heuristic to solve it. Computational tests evaluate the efficacy of the heuristic.