Naturally occurring left ventricular hyperplasia is a rare but lethal disease. There are very few reports of this cardiac disease in captive nonhuman primates. In a colony of Macaca mulatta (Rhesus monkey) at California National Primate Research Center, a large number of rhesus macaques were diagnosed by autopsy with naturally occurring left ventricular hypertrophy without obvious underlying diseases over a 22-year period. The confirmatory diagnosis of ventricular hypertrophy was based on findings of notable left ventricular concentric hypertrophy with reduced left ventricular lumen, which is very similar to human ventricular hypertrophy cases. This report discusses an 11-year-old Macaca fascicularis monkey (Cynomolgus monkey, crab-eating macaque), weighing 2.95 kg, that was presented for enrollment in a pharmacokinetic (PK) study. During the PK experiment, the monkey died following a sudden decrease in percutaneous oxygen saturation and heart rate. Gross and histological examinations of the heart were performed. On gross pathology, the left ventricular wall was thickened, and the chamber lumen was reduced. In histopathological examination using hematoxylin- eosin and Masson-trichrome stains, fibrosis and myocyte disarray were not observed, but an increased cell density, compared to the normal heart, was confirmed. The autopsy results confirmed left ventricular hyperplasia as the major cause of death.

This study aimed to examine the effect of a mild elevation in serum cholesterol level in a porcine coronary overstretch restenosis model using a balloon angioplasty catheter or drug-eluting coronary stent. Pigs were divided into two groups and were fed a commercial normal diet (CND, n = 4) or a high-fat diet (HFD, n = 4) for 5 weeks. Coronary overstretch injury by balloon angioplasty or stent implantation was induced in the left anterior descending and left circumflex artery after 1 week of feeding. Histopathological analysis was performed at 4 weeks after coronary injury. During the experiment, the total cholesterol level in the HFD group increased by approximately 44.9% (from 65.9 ± 3.21 mg/dL at baseline to 95.5 ± 9.94 mg/dL at 5 weeks). The lumen area in the CND group was reduced in comparison with that in the HFD group after balloon angioplasty. After stent implantation, the injury score showed no significant difference. There were significant differences in the neointimal area (2.7 ± 0.33 mm2 in the CND group vs. 3.3 ± 0.34 mm2 in the HFD group, p<0.05), lumen area (2.6 ± 0.54 mm2 in the CND group vs. 2.0 ± 0.33 mm2 in the HFD group, p<0.05), and percent area stenosis (52.0 ± 7.96% in the CND group vs. 62.4 ± 5.15% in the HFD group, p<0.05). Body weight change was not different between the two groups. Increased serum cholesterol level activated vascular smooth muscle cell proliferation in the porcine coronary overstretch model.

소나무재선충병의 나무주사는 살선충제를 중심으로 실시되어 왔으며, 매개충인 솔수염하늘소와 북방수염하늘소의 방제는 주로 항공방제나 지상방제를 통하여 이루어졌다. 본 연구에서는 나무주사를 통하여 매개충 (솔수염하늘소)을 방제하기 위한 연구로 Abamectin+Acetamiprid ME, Thiamethoxam DC 약제의 나무주사시 솔수염하늘소의 약효발현농도, 처리 후 기간별 효과(2017년~2018년)를 검토하였다. 실내 발현농도 시험에서는 Acetamiprid, Thiamethoxam LC50 value는 각각 0.102ppm, 0.083ppm 으로 나타 났으며, 야산(포장)에서 Abamectin+Acetamiprid ME, Thiamethoxam DC 처리구의 100.0% 치사 소요일 수는 처리 90일 후 11.0일, 9.4일, 처리 360일 후 11.6일, 10.0일로 나타나서 두 약제 모두 3월 처리시 다음해에 발생하는 매개충 (솔수염하늘소) 방제까지 가능함을 확인 할 수 있었다.

꽃노랑총채벌레는 저항성 해충군이 가지고 있는 크기가 작고 산란수가 많으며 세대기간이 매우 짧은 특성을 가지고 있다. 또한, 이동능력이 우수하고, 다양한 령기가 혼재하고 있으며, 꽃과 잎 등 식물체뿐만 아니라 토양에서 생활환을 완성하는 복잡한 생태를 가지고 있다. 이러한 총채벌레의 특성으로 인하여 시설 내 방제는 어려운 실정이며, 동일계통의 작용기작을 갖는 약제들의 단조로운 패턴의 약제사용으로 인하여 그 방제효과는 떨어지고 있다. 본 연구에서는 꽃노랑총채벌레의 효과적인 방제를 위한 약제 혼용살포, 연속살포, 로테이션 처리별 효과 검증을 통하여 방제체계를 제안하였다. 우선 실내에서 약제별 약충과 성충에 대한 처리방법별 효과 검토를 통하여 꽃노랑총채벌레 밀도가 높지 않은 초기에 사용이 가능한 약제와 총채벌레 밀도가 높은 시기에 처리할 수 있는 약제를 선발하였고, 이를 기반으로 포장에서 혼용살포, 연속살포, 로테이션 조합별 효과 검토를 하였다. 또한 본 시험결과들을 기초로 ㈜경농에서는 3가지 이상의 다른 작용기작의 약제를 밀도가 높을 경우 3~5일 간격으로 3회 이상 연속살포하는 3!3!3! 총채벌레 관리프로그램을 운영중이며 지속적으로 관리프로그램을 개선해 나가는 중이다.

Knit fabrics are created on diverse machines with diverse knit loops and conditions to make different patterns and fabric types1). Dimensional modifications of knit fabrics can also be achieved by numerous methods such as different knit-loop structures, different types of yarns, or different finishing processes including heat setting, steaming, chemical treatment et cetera. This research develops and explores sophisticated three-dimensional knit fabrics by combining the several different knit stitches including rib and purl. This study focuses on 3D knit models created on modern electronic weft (flat V-bed) knitting machines which have capability of individual needle selection. Several samples of the 3D knitted fabrics are also examined in this research. This research furthermore suggests new types of knitted fashion garment made by using the interesting physical effects.