This study investigates the preparation of activated carbon fiber derived from waste cotton fabric for economical and ecofriendly recycling as well as its application to water purification. The activated carbon fiber was prepared by physical activation using steam and the adsorption property was then evaluated using methylene blue. When the activation temperature increased, the specific surface area and mesopore volume of the activated carbon fiber increased up to 2562 m2/ g and 0.214 cm3/ g, resulting in the increased adsorption of methylene blue. The results of the adsorption experiment for the activated carbon fiber were analyzed using the Langmuir and Freundlich equations. The Langmuir equation was more suitable than the Freundlich equation to explain the adsorption equilibrium. The maximum adsorption amount of methylene blue was 161.1–731.5 mg/g for fiber samples activated at temperatures ranging from 750 to 950 °C with sample labeled 750SA to 900SA according to the Langmuir equation. The kinetics of methylene blue adsorption by the activated carbon fiber were analyzed using non-linear pseudo-first-order and pseudo-second-order. Sample 750SA was suitable for the pseudo-first-order and 800SA, 850SA, and 900SA sample were suitable for the pseudo-second-order. Therefore, waste cotton fabric has the potential to be the precursor for activated carbon fiber with excellent adsorption properties.

Interfacial adhesion between carbon fiber and epoxy resin mostly determine the mechanical properties of the carbon fiber/ epoxy composites and the chemical structures of epoxy resin and hardener plays an important role. In this regard, stereoisomerism of epoxy hardeners, such as 3,3′ and 4,4′-DDS (diaminodiphenylsulfone), can have significant influence on the fracture toughness of the cured epoxy and related carbon fiber composites. Therefore, this study aims to investigate the influence of stereoisomerism of epoxy hardeners on fracture toughness of the carbon fiber/epoxy composites. Triglycidyl aminophenol (TGAP) are selected as epoxy resin and 3,3′- and 4,4′-DDS are selected as epoxy hardener. Wetting behaviors and fiber matrix adhesion of TGAP/DDS mixtures onto carbon fiber are investigated and fracture toughness (KIC) of TGAP/ DDS mixtures are also investigated. Then, the mode II fracture toughness test of the carbon fiber/TGAP/DDS composites are carried out to investigate the influence of hardener stereoisomerism on fracture toughness of the resulting composites. Wetting and fiber matrix adhesion to carbon fiber of TGAP/3,3′-DDS was better than those of TGAP/4,4’-DDS and KIC of TGAP/3,3′-DDS was also better than that of TGAP/4,4′-DDS. As a result of the synergistic effect of better wetting, fiber matrix adhesion, and fracture toughness of TGAP/3,3′-DDS, the mode II fracture toughness of the carbon fiber/ TGAP/3,3’- DDS composites was almost twice of that of the carbon fiber/ TGAP/4,4′-DDS composites. Based on the results reported in this study, stereoisomerism of the epoxy hardeners can influence the fracture toughness of the resulting composites as well as that of the resin itself. In other words, only small difference, such as the spatial arrangement of the molecular structure of epoxy hardeners can cause huge difference in the mechanical properties of the resulting composites.

The effect of sudden changes of water temperature (WT) on the survival rate and physiological responses of the red spotted grouper (Epinephelus akaara) were examined by manipulating WT control system for 9 days. Experimental condition was divided in two different regimes at low (from 10°C to 4°C, decreased 1℃/d) and high (from 28°C to 34°C, increased 1°C/d) WT. Survival rate of experimental fishes were observed, and determined the changes of hematological characteristics by analyzing plasma levels of cortisol, glucose, total protein, and electrolytes (Na+, Cl–, K+). No mortality was observed until low WT 6°C (144 h) and high WT 32°C (96 h), and 100% mortality was observed at low WT 4°C (216 h) and high WT 35°C (171 h). Plasma levels of cortisol and glucose increased rapidly as decreasing WT, and the loss of swimming ability and respiration response was observed at low WT 7°C and high WT 34°C conditions.

Swordbean was recently introduced to Korea, and cultural technique for stable production, e.g. optimum seeding date and planting space, has not been established. This experiment was conducted to elucidate the changes of growth characteristics, yield components, and yield as affected by different seeding dates and planting spaces. Days to flowering was shortened by 4∼28 days as seeding was delayed. Stem diameter, number of pods per plant, number of seeds per plant, 100-seed weight, and seed yield tended to increase with delaying seeding up to 5 April and then to decrease with further delaying seeding. These results indicate that optimum seeding date of swordbean in unheated polyvinyl house would be early April. Although, the swordbean exhibited large increases in plant height, number of branches per plant, and stem diameter at the wider spacings, planting space could be decreased to the 60 cm plant-spacing and 30 cm row-spacing with no deleterious effect on yield.

추파 대·소맥의 조숙품종의 조기출수에 따른 개화등숙 및 수량성 변화를 구명하고자 대맥품종 조강보리, 밀양6호, 올보리, 동보리 1호 및 부농과 소맥품종 수원210호, 올밀, 조광 및 농림16호 등을 공시포장조건에서 파종기 차이와 장일처리로써 조기출수 및 출수기 차이를 유도하여 본 실험을 수행하여 얻은 결과를 요약하면 다음과 같다. 1. 파종기 및 장일처리에 의해 대·소맥에서 15일 출수기 차이가 유도되었으나, 성숙기는 불과 2∼6밖에 촉진되지 않았다. 2. 조기출수한 경우 출수∼개화 일수 및 등숙일수가 연장되었으며, 출수∼개화 일수 연장이 더 큰 것으로 나타났고, 이들 기간과 평균기온 간에는 각각 고도의 부상관이 있었다. 3. 조기출수만 것일수록 등숙초기의 엽면적은 좁았고, 엽면적유지기간(Leaf area duration)은 컸으며, 순동화율(NAR)은 낮았다. 4. 조기출수한 것에서 천립중은 증가하였으나 종실수량은 현저히 감소하였는데 이는 주로 수수 및 일수입수의 감소에 기인하는 것으로 나타났다.