검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 34

        1.
        2023.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Corn silage is extensively utilized in ruminant feeding on a global scale, with substantial research efforts directed towards enhancing its nutritional worth and managing moisture content. The purpose of this study was to assess the impact of normal cutting height and elevated cutting height on whole-crop corn silage. Corn was harvested at heights of 15 cm and 45 cm above the ground, respectively, 45 days after heading. The harvested corn was cut into 2-3 cm lengths and packed into 20-liter plastic silos in triplicate. The results showed that dry matter (DM), crude protein (CP), water soluble carbohydrates (WSC), and in vitro dry matter digestibility (IVDMD) of C45 were significantly higher than those of the control, while the neutral detergent fiber (NDF) was significantly lower in C45 (p<0.05). The C15 had higher yields than C45 (p<0.05). There was no significant difference in the total digestible nutrients (TDN) yield of whole-crop corn silage. The increase in cutting height resulted in a larger change in moisture content and NDF per centimeter. After 60 days-ensiling, C45 showed significantly lower NH3-N concentrations. Moreover, C45 had significantly higher lactic acid concentration, lactic acid/acetic acid ratio, and lactic acid bacteria count compared to the control. Mold was not detected and the yeast count was less than 2 log10 cfu/g fresh matter in both control and C45. In summary, C45 improved the feeding value and fermentation quality of whole-crop corn silage at the expense of forage productivity.
        4,000원
        2.
        2023.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        지능형 컴퓨팅의 등장으로 빅데이터를 활용한 패션 브랜드 의미 마이닝과 가치 홍보에 초점을 맞춘 새로운 연구 트렌드가 등장하였다. 본 연구의 목적은 인기 여성복 브랜드 5개를 대상으로 다양한 종류의 의류에 대한 소비자 감성 트렌드를 조사하는 것이다. 유니클로, 에이치스타일, 베로모다, 피스버드, 온리. 이를 위해 총 93,550건의 소비자 평가를 수집하고, 키스멧 감성 분석 엔진을 활용하여 의류 유형별 감성 극성도를 분석하였 다. 그 결과, 브랜드에 따라 감정 극성이 크게 다르다는 것을 알 수 있었으며, HSTYLE 후드티, ONLY 니트웨 어, 피스버드 순면, 유니클로 니트가 각각 소비자들에게 가장 강한 긍정적 감정을 불러일으켰다. 또한 이번 연 구에서는 각 브랜드에서 가장 인기 있는 의류 유형과 착용 효과를 밝혀 패션 기업이 효과적인 마케팅 전략을 수립하고 제품 제공을 강화하는 데 중요한 인사이트를 제공했다. 이러한 연구 결과를 바탕으로 게임 업계에서 는 감성 분석을 적용하여 다양한 게임 브랜드, 장르, 게임 플레이에 대한 플레이어의 감정 반응을 이해하고 게임 프로모션 전략과 제품 디자인 개발에 도움을 줄 수 있다. 전반적으로 이 연구 결과는 디자인 분야에서 빅데이터의 잠재력을 입증하고 업계에서 경쟁 우위를 확보하기 위해 빅데이터를 활용하는 것이 중요하다는 점을 강조할 수 있다.
        4,000원
        3.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Quora search engine redirects to different discussion pages based on the search terms searched by the user. So, when questions that are semantically similar are searched on Quora, it sometimes redirects a user to different discussion pages even if there exists a page to the dedicated search. In such a case, Semantic Similarity among the questions carries highest weightage. So, for text, using traditional methods for calculating similarity, usually the text is considered as sequence of words and they just count the number of words that occurred in a sentence, on which some distance measures are applied to find the similarity, while missing the semantic level knowledge of the text during calculation. Considering such traditional methods, it will also require a huge training set as well as time to produce an accurate model. But in this Research Paper, Siamese Based Network is used that can train itself on a single example of each text to provide an accurate similarity output.I have used different types of pre-trained word embedding models like word-2-vec and glove to understand the semantics of the question pairs present in Quora Question Pair dataset. This paper introduces a new approach to calculate sentence similarity and gives astronishing results outperforming the current state of art Siamese Based LSTM models. Along with this new approach of using Manhattan LSTM with attention mechanism for similarity calculation, a comparative analysis is performed on the embedded question pairs, among different Siamese based LSTM models like LSTM and Manhattan LSTM, to predict whether the questions are similar or not and get the best model combination for Quora Question Pair.
        4,300원
        4.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This experiment was conducted to investigate the change in the productivity of Italian ryegrass seeds according to the inter-row spacing in the southern region of the Korean Peninsula. Italian ryegrass (Lolium multiflorum Lam.) ‘Green Call’ variety was sown in Jinju, Gyeongnam in the fall of 2020 with three inter-row spacings (20, 30 and 40 cm). The experiment was arranged a randomized block design with three replications. The ryegrass was sown on October 17, 2020, and the harvest was on May 31, about 60 days from the first heading stage. There was no difference among treatments with an average of April 27th in heading stage. Plant height was significantly longer at 30 cm seeding interval and the shortest in 20 cm treatment. The length of the spike was the longest in the 40 cm seeding interval, and the number of seeds per spike was the highest in the 20cm seeding interval, but there was no significant difference among treatments. The seed yield was the highest at the 20 cm sowing interval (2,180 kg/ha), and decreased as the spacing increased. The dry matter content of seeds and straw was found to be 44.90% and 45.51% on average, and there was no significant difference among treatments. The amount of remaining straw after harvesting was found to be 7,506 kg/ha on average on DM basis, and was high at the 20 cm seeding interval. In view of the above results, it was found that it is most advantageous to sow at intervals of 20 cm when producing Italian ryegrass seeds through autumn sowing in the southern region.
        4,000원
        5.
        2022.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        To investigate the domestic seed production potential of Italian ryegrass, it was sown in autumn in the southern region and harvested in the spring of the following year to investigate the productivity and quality of seeds and straw. Italian ryegrass (Lolium multiflorum Lam.) ‘GreenCall’ variety was sown in Jinju, Gyeongnam in the fall of 2020 with three seeding rates (20, 30 and 40 kg/ha). The experiment was arranged consisted of a randomized block design with three replications. The ryegrass was sown on October 17, 2020, and the harvest was on May 31, about 60 days from the heading stage. The heading stage of Italian ryegrass was April 28, and there was no difference among treatments. Plant height was significantly shorter in the 40 kg/ha seeding treatment group, and there was no significant difference in the remaining treatments. The resistance of lodging, disease, and cold did not show significant differences among treatments. Spike length and number of seeds per spike were highest at 20 kg/ha seeding amount, and there was no difference in the remaining treatments. The seed yield was the highest at 1,956 kg/ha in the 20 kg/ha seeding rate, and there was no difference in the 30 and 40 kg/ha seeding rates. The dry matter content of seeds and straws was 45.60 and 41.83% on average, and there was no significant difference among treatments. The amount of remaining straw after seed harvesting was found to be 7,689 kg/ha on average on a dry basis, and it was high in the 40 kg/ha sowing area, but there was no significant difference among treatments. According to the above results, it was found that it is most advantageous to sow at 20 kg/ha when producing Italian ryegrass seeds through autumn sowing in the southern region.
        4,000원
        6.
        2022.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Carbon nanotubes (CNTs) were added into the self-healing polyurethane materials as conductive filler, the mass fraction of carbon nanotubes was adjusted, and 1% polyaniline was doped. The conductive self-healing polyurethane composites with different carbon nanotubes content (PU)-1/3/5/8/10 were prepared, and analyzed and tested. The result shows that the permeability threshold value of the composite material is 8wt%, and the comprehensive performance of the composite material PU-8 is the best; the resistance of PU-8 is 1278Ω, PU-8P has a resistance of 1400Ω; using an infrared camera, it can be seen that the material can reach 143.3 °C under the DC current of 0.1A, reaching the temperature condition when the material is repaired; the swelling test shows that the PU-8P equilibrium swelling rate is 177%, the gel content is 52.67%, and there is no dissolution in dimethyl sulfoxide. Solvent stability is better than PU-8;DSC test shows that the glass transition temperature of the soft segment of PU-8P is 43 °C, and the glass transition temperature of the hard segment is − 55 °C, which is not much different from that of PU-8; TG test shows that the epitaxial starting temperature of PU-8P is 365 °C; the observation photo is magnified by a stereo microscope at ten times and the PU-8P sample is cut of in the middle at room temperature, applying a constant voltage of 30 V, the cracks disappeared. The material cracks realized self-healing with electricity, and the repair efficiency reached 20.5%.
        4,300원
        7.
        2021.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The optimal determination of seeding rate is critical to minimizing uncertainties about the large variations observed in forage quality and productivity when alfalfa is cultivated under different geographical areas and growing conditions. The objective of this investigation was to provide information about the proper seeding rate according to harvest timing for alfalfa cultivation in the Northern regions of Korea. Alfalfa was sown in September 2018 at a seeding rate of 20, 30 or 40 kg/ha and harvested four times in 2019: May 3, July 2, September 11, and October 13. Regardless of seeding rate, alfalfa plant height was longest at the third harvest (113 cm) and the shortest in the last annual harvest (43.8 cm). However, seeding rate had no effect on alfalfa plant height at any harvest. Forage relative feed value was increased in the first cutting but decreased in the third cuttings as seeding rate increased. However, seeding rate had slight effect on alfalfa forage quality components at the second and fourth cuttings. Total annual DM and crude protein production (in 4 harvests) was greater at higher seeding rates. Plots seeded at a rate of 40 kg/ha produced on average 1,257 and 2,620 kg/ha more forage (DM basis) than those seeded at a rate of 30 or 20 kg/ha, respectively. Forage DM production at the first, second, third, and fourth harvests accounted for 36.1, 24.0, 27.1, and 12.8 % of total annual DM production, respectively. Overall, small differences were seen when alfalfa seeding rate was different but maximum forage DM production (in four harvests) was detected when seeding rate was 40 kg/ha. These data could be useful to the alfalfa growers by allowing them to make more accurate trade-offs between seed price and the expected magnitude of forage yield gains in order to select the best seeding rate.
        4,000원
        8.
        2021.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Cutting management has been identified as a critical factor in the alfalfa production systems because it has a significant impact on maximizing yield and maintaining the forage quality. The objective of this experiment was to determine the proper cutting height according to harvesting time for optimizing nutrient yield and forage nutritive quality of alfalfa grown in alpine regions of Korea. Alfalfa was sown at a seeding rate of 30 kg/ha in August 2018 and harvested at four cuttings in 2019 (3 May, 2 July, 11 September, and 13 October). Cutting heights were adjusted at 5, 15, and 25 cm above the soil surface. Alfalfa plant was tallest at the third cutting (109 cm), which was on average 35 cm taller than the first or second cutting. Relative feed value (RFV) remained unaffected by cutting height at the first harvest, but increased consistently in subsequent harvests as cutting height increased. Alfalfa collected at the first and fourth cuttings had the highest RFV (mean 152), which was on average 8 and 67 units higher than the second and third harvests, respectively. At each harvest, in vitro dry matter digestibility was highest in alfalfa cut at a 25-cm height. Dry matter (DM) production at each cutting height was highest in the first cutting, accounting for on average 36-37% of total annual DM production, and lowest in the fourth harvest, accounting for about 11-13% of the total DM yield. The total dry matter production (in four harvests) was 4,218 kg/ha higher when alfalfa was subjected to a cutting height of 5 cm rather than 25 cm. Cutting height had no effect on total crude protein yield, but from the first to fourth cutting, the protein yield followed a decreasing trend. Finally, there were visible declines in forage nutritive quality when alfalfa was cut at a shorter height. However, the magnitude of difference in total forage yield may outweigh the slight decline in forage quality when alfalfa is cut at a lower height. The findings of this study could help the alfalfa growers make better harvest management decisions.
        4,000원
        9.
        2021.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study was conducted to investigate the effects of species and varieties of summer forage crops on growth characteristics and productivity in Sihwa reclaimed land. The summer forage crops used in the trial were silage corn, sorghum×sudangrass hybrid(SSH), and proso millet. For each forage species, Gwangpyeongok(GPO), P15453, P1952 and P2088 were used for silage corn, and 877F, Green star, Honey chew, and Turbo gold cultivars were used for SSH. For proso millet, Ibaekchal, Geumsilchal and Manhongchal developed by the National Institute of Crop Science were used. Silage corn and SSH were sown on May 21, 2019 and proso millet on June 4, and harvested on September 2. There was no significant difference in plant and ear height of silage corn among varieties. P1543 was the highest and P2088 was the lowest in yield of silage corn, but there was no significant difference among treatments. Among the SSH, the plant height of 877F was the highest and Turbo gold variety had the smallest (p<0.05). As for the dry matter(DM) yields, 877F had the highest at 3,862 kg/ha and Green star had the lowest at 2,669 kg/ha (p<0.05). The fresh matter yield of proso millet was 15,778 kg/ha, which was higher than that of corn or SSH, The average dry matter yield was 4,780 kg/ha, and Ibaekchal variety had the highest DM yield compared to other varieties (p<0.05). P2088 had the highest TDN content and GPO was the lowest (p<0.05). As for the SSH, the TDN content of Green star and Honey chew varieties was significantly higher, and the RFV value was the lowest in Turbo gold. The average crude protein content of proso millet was 7.03%, and the highest TDN and RFV values were 64.36% and 106 in Geumsilchal. In the experiment of the germination rate of summer forage crops according to salt concentration, silage corn showed a germination rate of 83.1% even at 0.4% salinity. In particular, P2088 and P1921 varieties had more than 80% germination rate even at 0.6% salt concentration. As for the SSH, the germination rate of 877F was 93.3% even at 0.8% salinity, and 88.3% with Honey chew, indicating higher resistance to salt concentration compared to other varieties. Proso millet showed a high germination rate of 84.0 to 88.7% even at a salt concentration of 0.6%. Considering the above results, proso millet was recommended as the most suitable forage crop species in the Sihwa reclaimed land with high salt concentration, and the Ibaekchal variety is recommended as a suitable forage crop due to its high yield.
        4,000원
        10.
        2021.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Rose is one of the most economically important ornamental crops worldwide. Although rose products are widely used, limited genetic and genomic data from this species is available. Fundamental genetic knowledge can accelerate the development of superior rose germplasms. In the present study, we explored the genetic data (e.g., chromosome numbers, total chromosome length, and ploidy level) of 39 rose cultivars using conventional cytogenetic methods. Of the 39 rose cultivars tested, 36 (92.3%) were tetraploid (2n = 4x = 28). ‘Rosada,’ ‘Rosemarin,’ and ‘Hanmaum’ were diploid (2n = 2x = 14), triploid (2n = 3x =21), and tetraploid-based aneuploid (2n = 4x = 28 + 2), respectively. The total chromosome length ranged from 46.03 ± 0.55 μm in ‘Rosada’ (2x) to 138.51 ± 0.92 μm in ‘Christoper’ (4x). The chromosome information obtained in this study will be useful for rose breeding and germplasm evaluation.
        4,000원
        13.
        2021.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This experiment was conducted to compare the seed productivity of Spring sown Italian ryegrass(Lolium multiflorum Lam.) depending on the seeding rates(20kg/ha, 30kg/ha, 40kg/ha) in Gangwon region. The experiment was a randomized block design with three replications. The test plots were located in alpine areas of about 600 m above sea level in Gangwon province. The tested Italian ryegrass variety was ‘Greencall’ developed by the National Institute of Animal Science, RDA. Italian Ryegrass was sown on March 26, 2020, and the seed harvesting was on the 60th day(2 July) from heading date. The heading date was May 8 with no difference, There were no significant differences in the agronomic characteristics including plant height. 30kg/ha seed rate was the highest at 146.8 seed/spike and 40kg/ha seed rate was the lowest at 114.7 seed/spike for the number of seeds per spike. The number of spikes per unit area was the highest in 40kg/ha at 886/m2 and the lowest in 20kg/ha at 750/m2. The yield of seed and straw was the highest in 40kg/ha at 1,288kg/ha and 2,970kg/ha respectively, but there was no difference. From the above results, the production of Italian ryegrass seeds through spring sowing in the Gangwon region is not much than autumn seeding, requiring the input of various technologies to increase productivity in the future, and it is desirable to determine the production cost through economic analysis was evaluated.
        4,000원
        14.
        2021.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This experiment was conducted to study on the growth characteristics and seed productivity of Italian ryegrass (Lolium multiflorum Lam., IRG) planted in the Spring in Gangwon Highland according to the seeding distance (20, 30 and 40 cm). The field was located in highland around 600 m above sea level. The experimental design was randomized block design with three replication and the tested IRG variety was ‘Greencall’ developed by National Institute of Animal Science (NIAS). IRG was sown on March 26, 2020, and harvested on July 2. The plant height was the shortest at 80.5 cm in the 40 cm seeding distance plot (P<0.05), and there was no significant difference between the 20 and 30 cm seeding distance. The number of spike per square meter (m2) was significantly higher in the 20 cm seeding distance plot than that of 40 cm (937 vs. 571). The dry matter (DM) content of seed and straw after harvesting was 49.70 and 33.36 % on average, and there was no significant difference between treatments (P>005). However, there was a significant difference in the fresh and DM yield of seeds and straw (P<0.05). DM yield of seeds was significantly higher in 20 cm distance than that of 40 cm, and the yield of straw was the same trend. On the other hand, there was no significant difference in DM yield between 20 cm and 30 cm and also in the feed value of straw after seed harvesting among seeding distance. The average CP, ADF, NDF, and TDN contents were 6.91, 36.76, 61.75 and 59.86%, respectively, and the RFV value was 91. Considering the above results, the production of Italian ryegrass seeds sown in the spring in the highlands of the Gangwon is lower than that of autumn sowing, but it is judged that it needs to be reviewed in case it is unavoidable. In the future, there should be an economic analysis and the development of technology that can increase production.
        4,000원
        15.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This experiment was conducted to compare the seed productivity of the Italian ryegrass(Lolium multiflorum Lam.) varieties sown in the spring in Gangwon region. The experiment was randomized block design with three replications. The Experimental field was located in alpine areas of about 600 m above sea level in Gangwon province. The tested Italian Ryegrass varieties were ‘Greenfarm’, ‘Greencall’ and ‘Kowinearly’ developed by National Institute of Animal Science, RDA. Italian Ryegrass varieties were sown on March 26, 2020, and the harvest was on the 60th day of mean heading date, July 2. The heading date of Kowinearly was May 8, but Greenfarm and Greencall was May 4. The plant length was the largest in the Kowinearly variety. However, the Kowinearly suffered severe lodging. There was no significant difference in the length of spike among varieties, and the number of seeds per spike was the lowest in Greenfarm at 118.5 seed/spike. As for the seed weight per spike, the Greenfarm variety was significantly lower at 0.56 g/spike, but the 1,000 seed weight was the heaviest in the Greenfarm at 2.5g.. The number of spike per unit area was the highest in Greenfarm at 906/m2. The dry matter content of seeds was the highest in Greenfarm at 54.3%, and for straw, Kowinearly was the highest at 35.3%. Seed productivity was not significant among varieties, and the average was 1,493 kg/ha. The yield of straw after seed production was also not significant among varieties (P>0.05), and the average was 3,172 kg/ha. From the above results, the production of Italian ryegrass seeds through spring sowing in the Gangwon region is not much than autumn seeding, requiring the input of various technologies to increase productivity in the future, and it is desirable to determine the production cost through economic analysis was judged.
        4,000원
        18.
        2020.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This experiment was conducted to a comparison of the productivity according to variety and forage quality by plant parts of imported silage corn (Zea mays, L) in Pyeongchang. The corns evaluated in this experiment were 8 varieties (P1184, P1151, P1194, P1543, P1345, P1429, P1443, and P2105) introduced from the United States, Pioneer Hybrid Co. The harvested corn was divided into 5 plant parts (leaf, stem, cob, husk, and grain), and the ratio of each part was calculated using dry weight and the feed value was analyzed. The emergence rate of corn was generally good except for the P1151 and P2105 varieties. The average tasseling date was July 24th and the silking date was July 27th, but the P2105 variety was late to July 28th and August 1st, and the remaining varieties were similar. P1345 was the highest (289 and 123 cm), and P1151 varieties were the lowest (267 and 101 cm) in the plant and ear height. Disease resistance was low in P1184, P1443 and P1429, and P1197 and P1345 were high. In the case of stover, the dry matter (DM) content was the lowest at 19.6% in the P1151 and the highest at 24.9% in the P1429. DM content of ear was the highest in the P2105 (55.5%), and P1184 (54.2%) and P1345 (54.3%) were also significantly higher (p<0.05). The DM yield of stover of P2105, P1429 and P1194 varieties was significantly higher (p<0.05), and ear yield of P2105, P1345 and P1443 was higher. The proportions of each part of plants (leaf, stem, cob, husk, and grain) divided by 5 was high, with 50-60% of the ear(grain+cob) ratio. The ratio of husk and cob was roughly similar, and the leaf and stem part showed a ratio of about 20%. The crude protein (CP) content was highest in leaf, followed by grain. The CP content of the stem was the lowest, and the husk was not significantly different among the varieties (p>0.05). The acid detergent fiber (ADF) content was similar to the rest parts except grain, but the leaf part tended to be lower, and other parts except the stem and leaf showed no significant difference between varieties (p>0.05). There was no significant difference in NDF (neutral detergent fiber) content in husk, but there was a difference between varieties in other parts (p<0.05). In addition, there was a special difference by plant parts for each variety, P2015 on the stem, P1197 on the leaf, P1151 on the cob, P1197 on the husk, and P1197 on the grains with high NDF content. IVDMD (in vitro dry matter digestibility) was not significantly different between stems and grains, but there was a difference between varieties in cobs and husks. According to the results, DM yield of P2105 variety was the best in the experiment, and the ratio of grain was excellent in P1543 and P1345. In addition, it was found that the feed value was higher in the leaves and grains, and the leaf and stem had higher feed values than husk or cob.
        4,000원
        19.
        2020.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Carbonaceous materials are considered as potential adsorbents for organic dyes due to their unique structures which provide high aspect ratios, hydrophobic property, large efficient surface area, and easy surface modification. In this work, graphene nanoribbons (GNRs) were prepared by atomic hydrogen-induced treatment of single-walled carbon nanotube (SWCNTs), which inspire the idea of cutting and unzipping the SWCNTs carpets with the modified in molecules prevent because of the unfolding of the side-walls. The unfolded spaces and uniform vertical arrangement not only enhance the active surface area, but also promote the electrostatic and π–π interactions between dyes and GNRs. The improved adsorption capacity of GNRs beyond original SWCNTs can be determined by the adsorption kinetics and isotherm, which are evaluated through adsorption batch experiments of the typical cationic methylene blue (MB) and anionic orange II (OII) dye, respectively. It is shown that the adsorption kinetics follow a pseudo second-order model while the adsorption isotherm could be determined by Langmuir model. The results reveal that the maximum adsorption capacities of GNRs for MB and OII are 280 and 265 mg/g, respectively. The GNRs present the highly efficient, cost effective, and environmental friendly properties for the commercial applications of wastewater treatment.
        4,000원
        20.
        2020.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study was conducted to compare the agronomic characteristics and productivity according to the species and varieties of winter forage crops in reclaimed land. Winter forage crops used in this study were developed in National Institute of Crop Science, RDA. Oats (‘Samhan’, ‘Jopung’, ‘Taehan’, ‘Dakyung’ and ‘Hi-early’), forage barley (‘Yeongyang’, ‘Yuyeon’, ‘Yujin’, ‘Dacheng’ and ‘Yeonho’), rye (‘Gogu’, ‘Jogreen’ and ‘Daegokgreen’) and triticale (‘Shinyoung’, ‘Saeyoung’, ‘Choyoung’, ‘Sinseong’, ‘Minpung’ and ‘Gwangyoung’) were planted in the reclaimed land of Sihwa district in Hwaseong, Gyeonggi-do in the autumn of 2018 and cultivated using each standard cultivation method, and harvested in May 2019(oat and rye: 8 May, barley and triticale: 20 May.) The emergency rate was the lowest in rye (84.4%), and forage barley, oat and triticale were in similar levels (92.8 to 98.8%). Triticale was the lowest (416 tiller/㎡) and oat was the highest (603 tiller/㎡) in tiller number. Rye was the earliest in the heading date (April 21), triticale was April 26, and oat and forage barley were in early May (May 2 and May 5). The plant height was the highest in rye (95.6 cm), and triticale and forage barley was similar (76.3 and 68.3cm) and oat was the lowest (54.2 cm). Dry matter(DM) content of rye was the highest in the average of 46.04% and the others were similar at 35.09∼37.54%. Productivity was different among species and varieties, with the highest dry matter yield of forage barley (4,344 kg/ha), oat was similar to barley, and rye and triticale were lowest. ‘Dakyoung’ and ‘Hi-early’ were higher in DM yield (4,283 and 5,490 kg/ha), and forage barley were higher in ‘Yeonho’, ‘Yujin’ and ‘Dacheng’ varieties (4,888, 5,433 and 5,582 kg/ha). Crude protein content of oat (6.58%) tended to be the highest, and TDN(total digectible nutrient) content (63.61%) was higher than other varieties. In the RFV(relative feed value), oats averaged 119, while the other three species averaged 92∼ 105. The weight of 1,000 grain was the highest in triticale (43.03 g) and the lowest in rye (31.61 g). In the evaluation of germination rate according to the salt concentration (salinity), the germination rate was maintained at about 80% from 0.2 to 0.4% salinity. The correlation coefficient between germination and salt concentration was high in oat and barley (-0.91 and -0.92) and lowest in rye (-0.66). In conclusion, forage barley and oats showed good productivity in reclaimed land. Adaptability is also different among varieties of forage crops. When growing forage crops in reclaimed land, the selection of highly adaptable species and varieties was recommended.
        4,000원
        1 2