KORAD (Korea Radioactive Waste Agency, http://www.korad.or.kr) has stored slightly contaminated ascon (asphalt coated concrete mixture) that was introduced to Gyeongju repository about a decade ago waiting for a final disposal. It is believed to be mainly contaminated by radioisotope 137Cs due to impurities introduced from the outside during the ascon manufacturing process. We studied characteristics of the radioactive waste to see whether this material would be proper enough to be disposed in Gyeongju LILW repository or be other ways to reduce the disposal volume including self-disposal before its final disposal otherwise. KORAD looked into the properness of characteristics of ascon in terms of WAC (Waste Acceptance Criteria) documented by KORAD that includes general chemical and physical properties of asphalt, density, size of grains, content of organic material and possibility of existence of chelate materials that qualitatively limited to be disposed by the criteria. And other associated characteristics such as gas generation and bio degradation were also investigated. Based on the data obtained from the study, we proposed various plausible solutions in associated with operational and disposal safety and economic view points. This study will be used for KORAD’s decision on how to control and safely dispose the spent ascon within a reasonable time period. And also those experiences may be applied for other LILW issues that require treatment or conditioning of radioactive wastes in the future.

Radioactive waste is typically disposed of using standard 200 and 320 L drums based on acceptance criteria. However, there have been no cases evaluating the disposal and suitability of 200 L steel drums for RI waste disposal. There has been a lack of prior assessments regarding the disposal and suitability of 200 L steel drums for the disposal of RI waste. Radioactive waste is transported to disposal facilities after disposal in containers, where the drums are loaded and temporarily stored. Subsequently, after repackaging the disposal drums, the repackaged drums are transported to disposal facilities by vehicle or ship for permanent disposal. Disposal containers can be susceptible to damage due to impacts during transportation, handling, and loading, leading to potential damage to the radiation primer coating during loading. Additionally, disposal containers may be subject to damage from electrochemical corrosion, necessitating the enhancement of corrosion resistance. Metal composite coatings can be employed to enhance both abrasion resistance and corrosion resistance. The application of metal composite coatings to disposal containers can improve the durability and radiation shielding performance of radioactive waste disposal containers. The thickness of radioactive waste disposal containers is determined through radioactive shielding analysis during the design process. The designed disposal containers undergo structural analysis, considering loading conditions based on the disposal environment. This paper focuses on evaluating the structural improvements achieved through the implementation of metal composite coatings with the goal of enhancing corrosion and abrasion resistance.

In this study, Bacillus velesensis TJS119, isolated from freshwater, demonstrated growth inhibition against insect pathogenic fungi. The culture medium of the B. velezensis TJS119 strain underwent sequential fractionation with n-hexane, chloroform, ethyl acetate, n-butanol, and water. Notably, the n-butanol fraction exhibited significant antifungal activity against Metarhizium anisopliae and Beauveria bassiana. LC/MS analysis of antifungal peaks identified the production of various lipopeptides by B. velezensis TJS119, including two types of iturin A (C14, C15), four types of fengycin A (C14, C15, C16, C17), and two types of fengycin B (C16, C17). The antifungal efficacy of Iturin A and Fengycin against insect pathogenic fungi was further validated using the paper disc diffusion method. These findings underscore the potential of B. velezensis TJS119 as a promising candidate for future research and applications in the realm of agricultural biological controls against fungal diseases.

Honey bees are crucial pollinators for agricultural and natural ecosystems, but are experiencing heavy mortality in Korea due to a complex suite of factors. Extreme winter losses of honey bee colonies are a major threat to beekeeping but the combinations of factors underlying colony loss remain debatable. Finding solutions involves knowing the factors associated with high loss rates. To investigate whether loss rates are related to Varroa control and climate condition, we surveyed beekeepers in korea after wintering (2021–2022 to 2022–2023). The results show an average colony loss rate of 46%(2022) and 17%(2023), but over 40% colony loss before wintering at 2022. Beekeepers attempt to manage their honey bee colonies in ways that optimize colony health. Disentangling the impact of management from other variables affecting colony health is complicated by the diversity of practices used and difficulties handling typically complex and incomplete observational datasets. We propose a method to 1) Varroa mite population Control by several methods , and 2) Many nursing bee put in hive before wintering.

An induction melting facility includes several work health and safety risks. To manage the work health and safety risks, care must be taken to identify reasonably foreseeable hazards that could give rise to risks to health and safety, to eliminate risks to health and safety so far as is reasonably practicable. If it is not reasonably practicable to eliminate risks to health and safety, attention have to be given to minimize those risks so far as is reasonably practicable by implementing risk control measures according to the hierarchy of control in regulation, to ensure the control measure is, and is maintained so that it remains, effective, and to review and as necessary revise control measures implemented to maintain, so far as is reasonably practicable, a work environment that is without risks to health or safety. The way to manage the risks associated with induction melting works is to identify hazards and find out what could cause harm from melting works, to assess risks if necessary – understand the nature of the harm that could be caused by the hazard, how serious the harm could be and the likelihood of it happening, to control risks – implement the most effective control measures that are reasonably practicable in the circumstances, and to review control measures to ensure they are working as planned.

본 연구에서는 국내산 돌미나리에서 GABA생성능이 있 는 신규 유산균을 분리, 동정한 결과, Enteroccoccus casseliflavus로 확인되었다. 최근까지 Lactobacillus속과 같 은 GABA 생성 유산균에 대한 보고는 많이 되고 있고, 일 부 Enterococcs속 유산균도 보고되고 있으나 E. casseliflavus 종에 대한 보고는 없었다. 따라서 본 연구에서는 E. casseliflavus PL05 균주에 대한 GABA 생성 최적 조건을 찾기 위하여 배지의 유형, 생육 온도, 초기 pH 조건, 배양 시간, MGS 농도 및 탄소원을 포함한 다양한 조건을 테스 트하였다. PL05 균주는 MRS 혹은 TSB 배지보다 BHI 배 지에서 생육이 잘 되었으며, 배지의 초기 pH는 7-9 조건 에서 가장 생육이 왕성하였고, GABA 생성 조건 역시 유 사한 결과로 확인되었다. GABA의 기질에 해당하는 MSG 의 농도별 GABA 생성량을 조사한 결과, 7%에서 가장 높 은 생성량을 나타내었으나 5%에서도 유사한 수준으로 확 인되어 효율적인 측면에서 5%가 적합할 것으로 판단된다. 탄소원에 따른 생육 및 GABA 생성량은 말토오스를 사용 하였을 때 가장 높은 것으로 확인되었고, 이러한 최적의 조건들로 최종 테스트를 진행한 결과, 24시간째 140.06±0.71 mM의 GABA가 생성되었고, 전환율은 78.95%로 확인되 었다. 또한 반코마이신을 포함한 10개의 항생제에 대한 감 수성을 조사한 결과 내성이 없는 것을 확인하였다.

In order to extend the business viability of carbon nanotubes (CNTs), research on CNT dispersion in a solvent as well as in polymer matrix should be established. Herein, three kinds of dispersing agents, sodium deoxycholate (DOC), sodium dodecylbenzene sulfonate (NaDDBS), polyvinyl pyrrolidone (PVP), are selected and applied to quantify the dispersibility and dispersion stability of CNT aqueous dispersion. The dispersibility of CNT dispersion with the PVP, evaluated via viscosity and particle size analyses, are superior to those with the DOC and NaDDBS dispersing agents. CNT aqueous solution dispersed with PVP showed slightly higher viscosity and narrower particle size distribution than those with DOC and NaDDBS dispersing agents. In addition, the dispersion stability of CNT dispersion with the PVP, measured via lumisizer analyses, are superior to those with the DOC and NaDDBS dispersing agents. HR-TEM analysis verifies that the outstanding dispersibility and dispersion stability of CNTs in aqueous solution are due to the effect of the robust polymer wrapping of the PVP dispersing agent on the CNT surface. From the results of this study, the guidelines for the selection of the suitable dispersing agents and the systematic evaluation of dispersibility and dispersion stability of CNT dispersions can be suggested.