The paint removal of fighter jets is just as important as the painting, because perfect paint removal ensures the quality of the exterior painting on the aircraft. However, the current conditions for paint removal work of the ROKAF’s are poor. It is identified that the painting process currently implemented by the ROKAF is not only exposed to harmful compounds such as harmful dust and hexavalent chromium, but also consumes a lot of water. Thus, the introduction of advanced facility is considered. This study compares the fighter jets painting removal process currently applied by the Korean Air Force with the improved laser coating removal process of the US Air Force, and conducts an incremental analysis to perform economic analysis for the introduction of advanced facility. Four scenarios were envisioned on the premise of an increase in the number of fighters in the future, incremental analysis shows that laser coating removal method is advantageous in all scenarios. In addition, it is recommended that paint removal cycle keeps the current 12-year and the outsourcing amount to civilian depot is reduced.

This study aimed to examine the changes in dry matter yield and growth characteristics of alfalfa (Medicago sativa L.) in response to variations in sowing dates during the autumn season of 2021-22 in a dry paddy field of Chilbo-myeon, Jeongeup-si, Jeollabuk-do. Treatments comprised four sowing dates at 10-day intervals, i.e., October 8, October 18, October 28, and November 8, 2021. The winter survival rate of alfalfa showed a significant difference between different treatments but was at a satisfactory level for all (p<0.05). The winter survival rate for the fourth sowing date, a month later than the first sowing date, was approximately 11.7% lower than that for the first sowing date. The plant height ranged between 82.3–93.1 cm and 60.5–63.7 cm at the first and second harvest, respectively, smaller at the second harvest than at the first harvest. The total dry matter yield of alfalfa was the highest at 13,316 kg/ha for the first sowing date, and the later the sowing date, the lower the dry matter yield. The protein content of alfalfa ranged between 13.6–17.3% in the first harvest, lower than the standard alfalfa protein content of 20% or more. In relative feed value, the first sowing (Oct. 8) was the most significantly higher in the first harvest (p<0.05). These results suggest that the early and mid-October sowing dates are optimum for sowing alfalfa during autumn and result in improved plant growth, dry matter yield, protein content, and winter survival compared to those at later sowing dates. Therefore, dry paddy fields can be safely employed for alfalfa cultivation with sowing dates in early and mid-October during autumn.

The Korean Air-Force aircraft maintenance depot paints the exterior of various aircraft, including high-tech fighters. Aircraft exterior painting is a maintenance process for long-term life management by preventing damage to the aircraft surface due to corrosion. The de-painting process is essential to ensure the quality of aircraft exterior paints. However, because the Korean Air-Force’s de-painting process is currently done with sanding or Plastic Media Blasting (PMB) method, it is exposed to harmful dust and harmful compounds and consumes a lot of manpower. This study compares the de-painting process currently applied by the ROK Air-Force and the more improved process of the US Air Force, and performs economic analysis for the introduction of advanced equipment. It aims to provide information that can determine the optimal time to introduce new facilities through Cost-Volume-Profit (CVP) analysis. As a result of the analysis, it was confirmed that the sanding method had the most economical efficiency up to 2 units per year, the PMB method from 3 to 21 units, and the laser method from 22 units or more. In addition, in a situation where the amount of de-painting work is expected to increase significantly due to the increase in fighters in future, BEP analysis was conducted on the expansion of the existing PMB method and the introduction of a new laser method. As a result of the analysis, it was confirmed that it is more economical to introduce the laser method when the amount of work exceeds the PMB work capacity(18 units per year). The paper would helpful to improve the productivity and quality of the Korean Air Force Aircraft maintenance depot through timely changes of facilities in the workplace in preparation for expansion.

Physical and electrochemical qualities were analyzed after KOH activation of a direct methanol fuel cell using needle coke as anode supporter. The results of research on support loaded with platinum-ruthenium suggest that an activated KOH needle coke container has the lowest onset potential and the highest degree of catalyst activity among all commercial catalysts. Through an analysis of the CO stripping voltammetry, we found that KOH activated catalysis showed a 21% higher electrochemical active surface area (ECSA), with a value of 31.37 m2/g, than the ECSA of deactivated catalyst (25.82 m2/g). The latter figure was 15% higher than the value of one specific commercial catalyst (TEC86E86).

This study was to investigate pregnancy rate of IVM/IVF/IVC Korean cattle (registered in government) embryos according to transport time course. For the production of embryos, oocytes recovered from slaughtered excellent grade cow and highly motile frozen‐thawed bull semen (purchased from LIMC, KPN#497) was used. In vitro produced embryos were cultured in CR1aa medium for 8 days and some of them were frozen. The rate of average cleavage (>2‐cell) was 83.0% (308/371) and blastocyst rate at day 8 was 34.7% (107/308). Among in vitro produced blastocyst embryos at day 8, most healthy embryos were freshly transferred on production day and some frozen embryos were direct transferred on appropriate day. These embryos were produced in a laboratory, embryo transfer (ET) was planned in 10 areas of the remote island (Jeju) from the laboratory by airplane. Thus, we examined the pregnancy rate in recipient cow according to embryo of transport time course before ET. From embryo transferred 44 recipient cows, overall pregnancy was 40.9% (18/44), these 18 cows were all calved [single, 94% (17/18); twin, 6% (1/18)] and total embryo implantation rate was 26% (19/66). Comparing transport time in the base of 6 hr, pregnancy rate in ET group required less 4 hr (60%, 9/15) was significantly higher than that required more 6 hr (26.3%, 5/19). In direct ET of freezing embryos, the pregnancy rate was 40% (4/10). However, it was difficult to find the meaning of temperature, pH and corpus luteum quality of recipients on comparison of pregnancy rate. When the cell death level of embryos according to storage time in thermos (straw container) before ET was measured by TUNEL staining, apoptotic index was increased with storage time‐dependent. These results demonstrated that long distance transfer of IVM/IVF/IVC embryos is possible and the time of embryo transport is very important for the pregnancy rate on field trial.

Background : Ginseng, an important traditional medicinal plant still used in rats with bone fractures or dislocation to promote connective tissue repair and to reduce inflammantion. We investigated the effect of ginseng on the proliferation rate of rat bone. Methods and Results : We investigated the effect of ginseng extracts on blood biochemical parameters, bone density and bone inorganic components etc. and data were analyzed by one-way ANOVA. In the results of our study, the level of albumin and HDL, Ca, P, Mg, and estradiol in blood, and the content of Ca, P, ash in femur were significantly increased in ginseng treated group than in OVX group, and the level of ALP, AST, ALT, blood glucose, total cholesterol, triglyceride, LDL, creatinine, osteocalcin, and N-terminal telopeptide were significantly decreased in red ginseng treated group than in OVX group (p < 0.01). Conclusion : From these results, we knew that within the normal level, ginseng extracts improved liver and kidney function, component of glucose and lipid in blood, bone densith, bone ash and inorganic components in femur, and index related with bone metabolism.

Background : Insulin-like growth factor 1 (IGF-1) appears to enhance the differentiation of osteoblasts and to activate the mineralization of bone. Hence, the aim of this study was to investigate the effects of ginseng complex on the remodeling of rats tibia. Methods and Results : Ginseng complex significantly increased serum IGF-1 by 58% and 34.5% than the control, respectively. Treatment with α-amylase when manufacturing these extracts remarkably increased the concentration of IGF-1 by 63% and 36% above the control, respectively. This ways that this ginseng complex, especially α-amylase treated extracts, contained a higher level of IGF-1 secretion in the ginseng complex groups. In addition, increases of 8% in femuf length were found after 12 weeks of oral administration with ginseng complex (300mg/kg). Conclusion : These results mean that ginseng complex have beneficial effects on bone effects on bone growth via IGF-1.

Background : Our animal model of stress contained two components: (1) acute trauma, immobilization of rats in close proximity to a cat twice in 10 days, and (2) chronic social instability, 31 days of randomized housing of cage cohorts. Here we tested the hypothesis that daily social stimulation would block the development of the stress. Methods and Results : Beginning 24 h after the first cat exposure, adult male rats were given our established stress model, alone or in conjunction with daily social stimulation, in which all rats within a group interacted in a large apparatus for 2 h each day for the final 30 days. All behavioral, for example, anxiety, memory, startle testing, and physiological assessments, for example, body growth, organ weights, and corticosterone levels, took place following completion of the psychosocial stress period. Conclusion : From the above study, V. fauriei possess significant anti-stress properties and can be used for the treatment of stress-induced disorders.

This experiment was conducted to examine the influence of four plant growth regulators on growth, photosynthesis parameters and yield of soybean. To increase dry matter accumulation of seeds, some growth regulators were applied to field grown soybean cv. Sinpaldalkong #2 as determinate type and Muhankong as indeterminate type at dense planting condition. Choline caused significant reduction of stem length, but did not increase seed yield. The number of leaf and total leaf area were showed significant increase in all the treatments, but those increased tremendously in Muhankong treated with ethrel. CO2 assimilation and water use efficiency of a single leaf were showed the highest as 17.2 molm-2s-1 and 9.3 μ mmol mol-1 treated with mepiquat in Sinpaldalkong, respectively. The Photosynthetic rate was closely related to stomatal conductance, transpiration and water use efficiency. Mepiquat treatment mainly produced positive effects on the number of pods, percent of pod setting, number of seeds per pod in two cultivars and also increased their seed yield as compared with control.

The seedlings of yacon (Polymnia sonchifolia Poeppig ＆ Endlicher), which were cuttings, plug seedling (PS), crown bud before sprouting (CBBS), crown bud after sprouting (CBAS), and divided seedling after budding (DSAB) were planted at 70~times 50 cm planting distance on ridge; that was interow spacingintrarow spacing, and about 28,500~pm 71 plants/ha. CBBS didn't need work and equipment to raise seedlings. PS and DSAB grew taller to 140.5 and 143.3cm, respectively, than others at 150 days after planting. In the changes of plant height, PS and DSAB showed taller than others during growth period, cuttings, CBBS, and CBAS grew rapidly in middle growth stage. Excepting main stem and petiole length, other characters were significant for seedling. Fresh weights were different among seedlings. Even though the yield of plants grown from CBAS and CBBS were lower with 34.7 and 36.4 ton/ha, respectively, than 3.6 ton/ha of DSAB; its yield index were over 95%, hence, those of plants grown from cutting and PS were lower with 73 and 87%, respectively. The ratio of tuberous roots over 200g to total tuberous roots per plant was the highest from DSAB. Most of tuberous roots were under 200g per tuberous root from cuttings. CBBS, CBAS, and DSAB are suitable to use seedlings for high yield of yacono. Yacon plant by DSAB much produced tuberous root of over 200g.