본 논문은 국내 PWR 발전소에서 S/G tube 재질로 사용되고 있는 Inconel 600 및 690에 대한 부식 실험을 수행함으로써 작업자들의 주요 피폭원인 의 생성량을 예측하고자 하였다. 이를 위해 Inconel 600 및 690 재질로 총 12개의 시편을 제작하여 실제 발전소의 운전조건과 유사하거나 가혹한 조건에서 전면 부식실험을 pH별로 20일씩 총 60일간 수행하였고, 실험 결과를 정량적으로 분석하기 위해 GDS(Glow Discharge Spectrometer) 장비를 사용하였다. GDS 장비를 이용하여 정량적으로 분석한 결과 pH 7 및 9에서는 Inconel 600이 Inconel 690에 비해 부식이 잘 되는 것으로 나타난 반면, pH 4에서는 Inconel 690이 부식이 더 잘 되는 것으로 평가되었다. 이러한 경향을 보이는 것은 과도상태의 영향이 과도하게 반영된 것에 기인한 것으로 비교적 정확한 결론을 도출하기 위해서는 장시간의 부식 실험을 수행함으로써 과도상태에 의한 영향을 최소화해야 할 것으로 판단된다.
Most of the low-level liquid radioactive wastes generated from PWR plants are classified into high or low total suspended solid(HTDS or LTDS), and into radiochemical and radioactive laundry waste. Although the evaporation process has a high decontami- nation ability, it has several problems such as corrosion, foam, and congestion. A new liquid waste disposal process using the ion-exchange demineralizer(IED), instead of the current evaporation process, has been introduced into the Yonggwang NPP #5 and 6. These two methods have been compared to understand the differences in this study. Aspects compared here were the released radioactivity amount of the liquid radioactive wastes, the dose of off-site residents, the decontamination factor, and the amount of the solid radioactive wastes. The IED system is designed to discharge higher radioactivity about 20% than the evaporating system, and the actual radioactivity released from the evaporating and IED system were 0.473mCi and 1.098mCi, respectively. The radioactivity released from the IED was 2.32 times higher than that of the evaporating system. The dose of off-site residents was mSv for the evaporating system, and mSv for IED. The decontamination factor(DF) of the evaporator is, in most cases, far lower than the lower limits of detection(LLD) with the Ge-Li detector. Due to the low concentration of the liquid wastes collected from the liquid waste system, the decontamination factor of IED is very low. Since there is not enough data on the amount of solid radioactive wastes generated by the evaporation system, the comparison on these two systems has been conducted on the basis of the design, and the comparison result was that the evaporating system generated more wastes about 40% than IED.