이 연구에서는 사장교 및 현수교에 부착된 지진가속도계측기를 활용하여 교량의 안전성을 긴급하게 평가할 수 있는 기법을 제안한다. 실측된 지진가속도계측기의 상시 응답을 이용하여 구조해석 모델의 고유주파수와 비교를 통해 최대한 유사한 동적특성을 갖도록 모델링을 개선한다. 설계지진에 대한 지진해석을 수행하여 지진가속도계측기 설치 위치별 최대 변위를 도출하며, 도출된 변위는 사전에 관리기준치로서 시스템에 기 입력된다. 지진발생 시 실시간으로 측정된 가속도 시간이력을 필터링 후 2중적분을 통해 변위시간이력으로 변환한 뒤 최대 변위를 추출한다. 최종적으로 시스템에 기 입력된 관리기준치와 추출된 변위와의 비교를 통해 안전성을 평가한다. 경주지진 시 기록된 데이터를 활용한 12개 특수교량의 긴급 안전성평가 수행을 통해 제안된 방법의 적용성을 확인한다.

This paper is a study on the development of a data analysis platform that constitutes a part of the development task of the constant monitoring system that can prepare against the earthquake disaster by using the regular measurement data of the old school buildings. The data analysis platform is composed of database management software that manages the metrology data acquired by using the instrument and data management software that analyzes the metrology data, analysis tools that can analyze the metrology data in various ways, A data analysis platform can be used to assess the safety of the school building and evaluate the seismic safety of the old school building to build a system for earthquake disaster.

The objectives of this research are to suggest the basic plans for earthquake data construction using data sharing platform, and to design the earthquake information contents based on stakeholder's needs. To strengthen the earthquake disaster response capacity, customized contents for public and local/central government use and specific sharing platform are developed. Finally, the step-by-step data sharing roadmap is suggested.

When conducting the seismic response analysis on a long elevated structure, if the transmitting boundary is set at both ends of the analysis region, there is a condition that the response becomes larger than in the case of the free boundary. In this research, we studied the influence of the effective duration time of earthquake motion on the maximum displacement amplitude of earthquake response and the response energy of earthquake when carrying out similar analysis using viscous boundary. As a result, it was confirmed that the correlation between the effective duration and the relationship between the viscous boundary and the maximum displacement amplitude ratio of the free boundary is low. On the other hand, for the relationship between the effective duration time and the response energy ratio between the viscous boundary and the free boundary, the variance was small and a certain correlation was confirmed.

This paper presents the seismic assessment of the effect of vertical ground motion on the three-story RC building with different geometric configurations considering the vertical-to-horizontal peak ground acceleration (V/H) ratio increases. The effects of a suite of earthquake ground motion records on three-story RC buildings are presented and the results are compared with the case of horizontal only excitation. Interstory drift was considered as a global failure criterion, while the curvature ductility and shear capacity of structural members were monitored to assess failure on a local level. The effect of vertical ground motion on axial force and shear capacity is also investigated.

After Po-Hang earthquake(Magnitude 5.4, Nov.15. 2017), total 55 cut slopes along the expressway within 25km from earthquake source were examined if there were any signs of instabilities such as rockfalls, surface failure, cracks and wood tumbles. Examination revealed that no cut slope showed any abnomality. This result raise an issue if design of slope against seismic activity is necessary. In this paper, necessity and seismic analysis method are discussed.

2016년 경주지진 이후로 국내에서도 본격적으로 건축물의 지진대책 강구가 시급한 시점에서 국내에 널리 보급되어 있는 R/C 건축 물의 효율적인 내진성능 평가 및 내진보강을 포함한 내진대책을 위한 기초적인 자료를 얻고자, 2016년 경주지진에서 지진피해를 받은 R/C 저 층 학교건축물(M학교)을 대상으로 지진피해도구분판정법을 이용하여 잔존내진성능과 지진피해정도를 평가함과 동시에, 부재수준의 비선형 동적해석을 수행하여 지진피해정도와의 상관관계를 검토하였다. 지진피해도구분판정에 의한 손상도-I로 분류된 기둥은 2개, 손상도-Ⅱ가 1 개, 손상도-III으로 분류된 기둥이 3개로 각각 평가되어, 최종적으로 평가한 내진성능잔존율(R)은 88.2%로 피해분류는 소규모 피해로 판정되 었으며, 또한 비선형동적해석 결과 1층 X방향의 최대응답을 나타낸 기둥의 휨변위는 0.7 mm, 전단변위는 6 mm로 전단균열은 발생하였지만, 전단파괴는 발생하지 않았다. 경주지진에서 지진피해를 입은 M학교의 지진피해가 1층의 X방향에 집중되어 있다는 사실, 휨균열보다는 전단 균열이 발생하였다는 사실을 고려한다면 본 연구에서 수행한 비선형동적해석 결과는 2016년 경주지진에서 지진피해를 받은 M학교의 지진피 해상황을 잘 반영하고 있다고 사료되며, 국내 기존 저층 R/C 건축물의 효율적인 내진성능 평가 및 내진보강을 포함한 내진대책을 위한 기초적 인 자료로서 활용가능하다고 사료된다.

The electric coupling between the lithosphere and the ionosphere is examined. The electric field is considered as a timevarying irregular vertical Coulomb field presumably produced on the Earth’s surface before an earthquake within its epicentral zone by some micro-processes in the lithosphere. It is shown that the Fourier component of this electric field with a frequency of 500 Hz and a horizontal scale-size of 100 km produces in the nighttime ionosphere of high and middle latitudes a transverse electric field with a magnitude of ~20 mV/m if the peak value of the amplitude of this Fourier component is just 30 V/m. The time-varying vertical Coulomb field with a frequency of 500 Hz penetrates from the ground into the ionosphere by a factor of ~7×105 more efficient than a time independent vertical electrostatic field of the same scale size. The transverse electric field with amplitude of 20 mV/m will cause perturbations in the nighttime F region electron density through heating the F region plasma resulting in a reduction of the downward plasma flux from the protonosphere and an excitation of acoustic gravity waves.

In the case of fluid storage structure, hydrostatic pressure acts on the structure due to fluid surge during an earthquake. At this time, hydrodynamic pressure of the fluid charge not only by the strength of the earthquake but also by the sloshing height of the fluid. Factors affecting the change of load include the size, width and height of the fluid storage structure and height of fluid, time-history shape, etc. This paper wanted to identify the relationship between the earthquake shape and fluid free surface shape. The sloshing height measured the height of the fluid by applying earthquake to a tank whose width 500mm and comparison of the experiment and analysis. In addition, the shape of the fluid free surface was measured while varying the shape of earthquake and effective of the shape of earthquake of the fluid was analyzed.

This study summarizes the results of the research results published by the researchers after the 2016 Gyeongju earthquake and will be reflected in the development of the seismic control system to be conducted in the future. Although various researchers' seismic analysis and effective frequency analysis for Gyeongju earthquake have been proposed, it is necessary to present the certified seismic records to evaluate the proper seismic response of the structure.

This study compared the result applying two analysis methods based on Newmark Sliding Block theory to calculate permanent displacement that is an estimating factor for seismic safety of Fill Dam. It was analyzed FEM numerical coupled-analysis and Makdisi-Seed method. The permanent displacement for the body of dam during earthquake indicated similar displacements with each of them at the same seismic load.

The purpose of measuring a dam operated after design & construction is to properly operate reservoir and maintain dam structural safety by comparing the really measured data for the behavior of dam with the data for design & construction, the past mesured data and analyzing them. In this paper, the really measured data is analized for a dam facilitiy located near a seismic epicenter of earthquake that occurred on 12th, Nov. 2016 in Gyeong-ju and the results of safety inspection for a dam is shown by comparing the behavior of dam before and after occuring earthquake

Earthquake safety assessment software of the cable-stayed bridge using the seismic acceleration measurement date was developed. Various safety assessment indices for evaluation structural safety and serviceability of bridges are discussed. A systematic approach is proposed to process the raw data for generating appropriate safety assessment indicators. The software for structural state evaluation includes (i) format conversion of raw data, (ii) noise filtering, (iii) generation of assessment index, (iv) state evaluation. Determination of the limit state included in the condition evaluation step is discussed and an example of the graphic user interface of the software is shown.

The F2-layer critical frequency (foF2) data from several ionosondes are employed to study the long-distance effect of the M8.8 Chile Earthquake of February 27, 2010, on the F2 layer. Significant perturbations of the peak F2-layer electron density have been observed following the earthquake at two South African stations, Hermanus and Madimbo, which are located at great circle distances of ~8,000 and ~10,000 km from the earthquake epicenter, respectively. Simplified estimates demonstrate that the observed ionospheric perturbations can be caused by a long-period acoustic gravity wave produced in the F-region by the earthquake.

The purpose of measuring a dam operated after design & construction is to properly operate reservoir and maintain dam structural safety by comparing the really measured data for the behavior of dam with the data for design & construction, the past mesured data and analyzing them. In this paper, the really measured data is analized for a dam facilitiy located near a seismic epicenter of earthquake that occurred on 12th, Nov. 2016 in Gyeong-ju and the results of safety inspection for a dam is shown by comparing the behavior of dam before and after occuring earthquake.

Earthquake safety assessment software of the cable-stayed bridge using the seismic acceleration measurement date was developed. Various safety assessment indices for evaluation structural safety and serviceability of bridges are discussed. A systematic approach is proposed to process the raw data for generating appropriate safety assessment indicators. The software for structural state evaluation includes (i) format conversion of raw data, (ii) noise filtering, (iii) generation of assessment index, (iv) state evaluation. Determination of the limit state included in the condition evaluation step is discussed and an example of the graphic user interface of the software is shown.

In this paper, a logger of an earthquake accelerometer in order to link and share the seismic data easily with related institutes is presented. The firmware is embedded into the logger, which transforms the seismic data into the formats, miniSEED.

In here, a Modified Diagrid Structural System (MDSS) has been proposed to compare with diagrid structural system, Regular Frame with Optimized Single Tuned Mass Damper (RFwOSTMD) system and Regular Frame without Optimized Single Tuned Mass Damper (RFwoOSTMD) system. To this aim, a rectangular reinforced cement concrete (R.C.C) building and a diagrid R.C.C multi-storey building were considered, and analyzed without controlling device, with optimized TMD, Diagrid Structural System (DSS), and MDSS. All of the models are investigated by using SAP2000. All of the buildings are analyzed and evaluated under El-centro earthquake. The response of proposed MDSS under earthquake is compared with the RFwoOSTMD, RFwOSTMD and DSS. The results show that the proposed MDSS is preferable than the DSS, as well as RFwOSTMD.