In this study, the sensitivity analysis of hydraulic conductivity and separation distance (distance between injection well and pumping well) was analyzed by establishing a conceptual model considering the hydrogeologic characteristics of facility agricultural complex in Korea. In the conceptual model, natural characteristics (topography and geology, precipitation, hydraulic conductivity, etc.) and artificial characteristics (separation distance from injection well to pumping well, injection rate and pumping rate, etc.) is entered, and sensitivity analysis was performed 12 scenarios using a combination of hydraulic conductivity (10-1 cm/sec, 10-2 cm/sec, 10-3 cm/sec, 10-4 cm/sec) and separation distance (10 m, 50 m, 100 m). Groundwater drawdown at the monitoring well was increased as the hydraulic conductivity decreased and the separation distance increased. From the regression analysis of groundwater drawdown as a hydraulic conductivity at the same separation distance, it was found that the groundwater level fluctuation of artificial recharge aquifer was dominantly influenced by hydraulic conductivity. In the condition that the hydraulic conductivity of artificial recharge aquifer was 10-2 cm/sec or more, the radius of influence of groundwater level was within 20 m, but In the condition that the hydraulic conductivity is 10-3 cm/sec or less, it is confirmed that the radius of influence of groundwater increases sharply as the separation distance increases.

In this study, the behavior of fresh water body between the injection and production wells with the fresh water injection rate in a saline aquifer is numerically analyzed by using a three-dimensional numerical model. 8 injection wells are arranged at equidistant intervals on a concentric circle and one production well is located at the center of this circle. In the case that the fresh water injection rate is relatively small, the fresh water body around a injection well screen is not mixed with neighboring ones and is independently distributed. However, when the injection rate is increased, the size of the fresh water body is continuously increased, and the areas, where saline and fresh water among injection wells are mixed, are appeared. The mixed degree is increased as the injection rate is increased. This phenomenon is identically generated around the production well. Moreover, when the injection rate is increased, the ratio of saline water in and around the production well is decreased.

대수층 바닥이 해수면보다 낮은 해안 지역에서는 관정에서의 적정양수량이 해수침투 여부에 의하여 결정될 수 있다. 이러한 지역에서 관정의 적정 양수량을 초과하는 수요를 만족시키기 위하여 과잉양수를 시행해야하면 우기의 잉여 지표수를 대수층에 주입함으로서 과잉 양수정을 연중 보호할 수 있다. 본 연구에서는 최소의 주입으로 과잉 양수정을 보호할 수 있는 주입정의 위치와 우기의 주입량을 계산하는 전산모델을 개발하였다. 경계면모델과 최적화방법을 조합하여 개발된 수치