This study measured the displacement that occurs when applying expansion joints between the jointed concrete pavement (JCP) and continuously reinforced concrete pavement (CRCP) on domestic expressway and obtained the basic data necessary for the rational design of expansion joints. Displacement gauges were installed at the ends of the CRCP expansion joints, and the longitudinal displacements were measured for five years to derive daily and seasonal displacements, which were compared with the results obtained at the JCP and anchor lug ends. The expansion joints of the CRCP terminal ends were observed to have initially expanded by 5.8 and 5.9 mm. The daily displacements were 0.024 and 0.034 mm/℃ on average, and the seasonal displacements decreased rapidly with an increase in distance from the CRCP ends. In addition, the displacements at locations 50–150 m away exhibited behaviors that were inversely proportional to the temperature, suggesting that they were more affected by the surrounding cracks. The seasonal displacement measured at the end of the CRCP expansion joint was 0.0292–0.0701 mm/℃. The displacement occurring at the end of the domestic CRCP expansion joint was estimated to consist of short-term expansion and seasonal displacements and was lower than when the asphalt separation layer was used. This was because the surface behavior was strongly suppressed below the lean concrete layer. Therefore, continuous observation is necessary, as different trends may be observed according to the increase in CRCP thickness.
국내에는 지형적인 조건 또는 그 외의 여러 제약에 따라 줄눈 콘크리트 포장(JCP)을 시공하는 경우가 많았다. JCP는 시공 이후 양생 제로 도포함에도 불구하고 시간이 지남에 따라 부등건조수축이 나타나, 운전자의 승차감과 안정성을 악화시킨다. 이를 해결하기 위해 포장설계 지침을 지속적으로 개정하고 있지만, 부등건조수축으로 인한 민원이 계속 발생하고 있는 실정이다. 본 연구에서는 JCP의 부등건조수축량에 영향을 줄 수 있는 변수를 설정하여 변수에 따른 거동 차이를 보고자 하였다. 3D 유한요소해 석 프로그램 ABAQUS를 이용하여 유한요소법을 통한 해석을 진행하였고, 모델링은 2차로 6 슬래브를 모형화하였다. JCP의 부등건조 수축량에 영향을 주는 슬래브 깊이별 온도변화가 포장설계에 따라 어떻게 변화하는지 고려하기 위하여, 그에 대한 변수로 하부층 종 류의 영향, 슬래브 두께의 영향, 주행차로 다웰바 추가 설치 유무의 영향, 줄눈 간격의 영향을 설정하였다. 기본적인 모델의 유한요소해석 부등건조수축량 결과와 위에서 설정한 변수를 적용하여 만든 모델에 대한 유한요소해석 부등건조수축 량 결과를 각각 도출하였고, 기본 모델 결과와 변수를 적용한 모델 결과를 비교하여 각각의 인자가 어느 정도의 영향을 미치는지 확 인해 보았다. 영향이 큰 인자들을 선별하여 복합적인 변수에 대한 영향을 보고자 하였고, 복합 변수를 적용한 모델의 유한요소해석 부등건조수축 량 결과와 기본 모델의 유항요소해석 부등건조수축량 결과를 비교하여 그 차이가 어느 정도인지 확인하였다. 이에 따라 앞으로 JCP구 간 부등건조수축에 대한 해결을 위해 중점을 두어야 할 인자를 파악할 수 있었으며, 결과를 현장에 적절하게 적용한다면 도로 주행성 과 안전성을 개선할 수 있을 것으로 판단된다. 유한요소해석 결과에 대한 신뢰도를 부여하기 위해 현장 데이터와도 비교 분석하였고, 계절에 따라 약간의 차이는 있었으나, 평균값 과는 유사하여 본 연구의 구조해석 모형이 다양한 조건에 따른 연직변위 발생함에 있어 비교하는데 유용하다고 판단하였다.