In this study, we investigate the mechanical and metallurgical properties of the gas metal arc welding. According to flux cored arc welding parameters during welding ATOS80, improving the working conditions of the welding industry to use high strength steel ATOS80 we propose to. Weld test is the tensile strength, yield strength, elongation, hardness, brittleness, such as macro-structure check of the mechanical properties and the weld, the microstructure inspection, defects of the weld subjected to radio-graphic inspection and tissue after welding the test pieces according to the condition variable comparative analysis was investigated by the state.

The purpose of this study is to research into which characteristic is shown according to a change in filler metal in case of CO2 gas arc welding by using Automobile Structural Steel(ATOS80). The major characteristics of this study were experimented by having Bevel angle as 50°, Root gap as 3mm, Filler metal as Solid wire & Flux wire, and the projected length of wire as 15mm. This study made the welded test specimens for the KS specification in advance suitably for the conditions, thereby having comparatively analyzed with the data value that was obtained through tensile test, hardness test, impact test and Macro Structure Detecting. Arranging the results that analyzed finally, the tensile strength and the hardness appeared to be excellent in case of welding with flux wire. The impact strength was indicated to be superior in case of welding with solid wire.