Vitrification is one of the best ways to immobilize high-level radioactive waste (HLW) worldwide over the past 50 years. Since the glass matrix has a medium (3.0-5.5 A) and short (1.5-3.0 A) periodicity, it can accommodate most elements from the periodic table. Borosilicate glass is the most suitable glass matrix for vitrification due to its high chemical durability, high waste-loading capacity, and good radiation resistance. Mo is a fission product contained in liquid waste generated in the process of reprocessing spent nuclear fuel and exists in the form of MoO4 2- in the glass. MoO4 2- forms a depolymerization region without directly connecting with the glass network former. When the concentration of Mo increases in the depolymerization region, it combines with nearby alkali or alkaline earth cations to form a crystalline molybdate phase. Phase separation and crystallization in the glass can degrade the performance of the material because it changes the physical and chemical properties of the glass. In particular, since alkali molybdate has high water solubility when it forms crystals containing radioactive elements such as Cs, there is a risk of leakage of radionuclides by groundwater during deep underground disposal. Therefore, in this study, the most stable glass-ceramic composition was developed using various alkali elements, and the difference in phase separation and crystallization behavior in glass and the stability of the solidified body were analyzed by structural analysis of the glass network and alkali molybdate. The cause of the difference in crystallization of alkali molybdate according to the type of alkali cation is structurally analyzed, and using this, research is conducted to increase the Mo content in the glass without crystallization.

The object of this research is to confirm the effect of Waste Glass Sludge on properties of concrete through compressive strength and Alkali-Silica reaction of concrete and to develop as construction material.

Since biodiesel as bioenergy is defined as ester compounds formed by esterification of animal/vegetable oils, in this study three vegetable cooking oils (market, waste and refined waste ones) were esterified by reactions of alkali catalyst and immobilized enzyme. The fatty acid composition of the formed ester compounds was analyzed to investigate the feasibility of biodiesel production. By lipolysis (i.e, hydrolysis of Triglyceride (TG)), all three vegetable oils used in this study were found to produce Diglyceride (DG), Monoglyceride (MD) and Fatty acid ethylester (FAEE). However, the amount of produced FAEE (which can be used as an energy source) was in the increasing order of market cooking oil, waste one and refined waste one. With NaOH catalyst, FAEE was produced about 24.92, 17.63 and 11.31 % for the respective oils while adding Lipozyme TL produced FAEE about 43.54, 38.16 and 24.47 %, respectively. This indicates that enzyme catalyst is more effective than alkali one for transesterification. In addition, it was found that the composition of fatty acids produced by hydrolysis of TG was unchanged with alkali and immobilized enzyme reactions. Thus it can be expected that stable conditions remain in the course of mixing with gasoline whose composition is similar to that of the fatty acids.