Recently, the spent fuel pools withdrawn from nuclear power plants in Korea have been saturated. Therefore, specific regulations on the management of spent fuel pools, such as transportation and intermediate storage are needed. The burnup history is directly related to the management of spent nuclear fuel. This is because the decision to handle nuclear fuel may vary depending on the initial concentration of nuclear fuel, the degree to which nuclear fuel is irradiated and radioisotope nuclides are decayed, and the cooling state in the spent nuclear fuel storage tank. The purpose of this study is to determine the burnup of fuel based on the value obtained by scanning the surface of spent nuclear fuel through a neutron detector. Conversely, a database of neutron signals that scan bundles of spent nuclear fuel with an instrument with an already identified combustion history needs to be completed. First of all, the correlation between burnup history and nuclides was identified in previous studies. By setting the burnup history as the input value in the ORIGEN-ARP code, it was possible to identify the radioactive isotopes remaining in the bundle of nuclear fuel. Neutrons can finally be measured based on the amount of nuclide inventory that constitutes spent nuclear fuel. Through MCNP, the neutron detector was simulated and signals were measured to confirm how it correlates with the previously acquired burnup history database. In addition, the M (sub-critical multiplication) value, which is essential for neutron measurement, was checked to confirm the degree to which additional neutrons were generated in spent nuclear fuel in a subcritical state. The target nuclear fuel assembly was CE16×16, WH14×14, and WH17×17, which confirmed the correlation (1) between burnup, enrichment, and cooling time with the previous research topic, TNSI (Total neutron source intensity). 􀜤􀜷􁈺􀜩􀜹􀝀/􀜯􀜶􀜷􁈻 = 0.83􁈺􀜵􀯇􁈻􀬴.􀬶􀬷􀬼 ∙ 􁈺􀜫􀜧􁈻􀬴.􀬸􀬺􀬶􀬻 ∙ 􀝁􀬴.􀬴􀬴􀬼􀬷∙􀯧 􁈺1􁈻 A neutron signal will be obtained from the case according to each burnup history constituting this database. In particular, PAR=SF, a function that calculates the production amount of the fission product, was used. To confirm the computational logic of SF, it was confirmed whether a reasonable calculation was made by calculating with a nuclide spectrum.