The process optimization of directed energy deposition (DED) has become imperative in the manufacture of reliable products. However, an energy-density-based approach without a sufficient powder feed rate hinders the attainment of an appropriate processing window for DED-processed materials. Optimizing the processing of DEDprocessed Ti-6Al- 4V alloys using energy per unit area (Eeff) and powder deposition density (PDDeff) as parameters helps overcome this problem in the present work. The experimental results show a lack of fusion, complete melting, and overmelting regions, which can be differentiated using energy per unit mass as a measure. Moreover, the optimized processing window (Eeff = 44~47 J/mm2 and PDDeff = 0.002~0.0025 g/mm2) is located within the complete melting region. This result shows that the Eeff and PDDeff-based processing optimization methodology is effective for estimating the properties of DED-processed materials.

Due to stricter environmental regulations of the International Maritime Organization (IMO), the number of ships fueled by Liquefied Natural Gas (LNG) is rapidly increasing. The International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code) limits the material of tanks that can store cryogenic substances such as LNG. Among the materials listed in the IGC Code, ASTM A553M-17 has been recently adopted as a material for LNG fuel tank projects because of its excellent mechanical properties at cryogenic temperatures. In shipyards, this material is being used to build tanks through Flux Cored Arc Welding (FCAW). However, there is a problem that magnetization occurs during welding and there is a big difference in welding quality depending on the welding position. In order to overcome this problem, this study intends to conduct basic research to apply laser welding to ASTM A553M-17 material. As a result of analyzing the bead shape according to laser BOP speed and Energy density performed in this study, it was confirmed that the penetration and energy density are proportional but the penetration and BOP speed are inverse proportional to some extent. In addition, a range of suitable welding speed and energy density were proposed for the 6.1mm thickness material performed in this study.

The charge transfer (CT) excitation energy calculations of H2N-(CH=CH)3-X and the H2N-H.....H-X structures with the various electron acceptors (-X) were performed with comparing the accuracy of various calculation methods, such as B3LYP, long-range corrected (LC)-BLYP, and EOM-CCSD. Both intra-molecular and inter-molecular systems showed a tendency for CT excitation energy to decrease as the electronic accepting property increases, and LC-BLYP showed the best accuracy in both inter- and intra-molecular CT excitation energy. In this study, it was confirmed that unexpectedly larger range separation parameter(μ) values of LC-BLYP showed better results of CT excitation energy.

This study examines paraelectric Bi1.5Zn1.0Nb1.5O7 (BZN), which has no hysteresis and high dielectric strength, for energy density capacitor applications. To increase the breakdown dielectric strength of the BZN film further, poly(vinylidene fluoride) BZN-PVDF composite film is fabricated by aerosol deposition. The volume ratio of each composition is calculated using dielectric constant of each composition, and we find that it was 12:88 vol% (BZN:PVDF). To modulate the structure and dielectric properties of the ferroelectric polymer PVDF, the composite film is heat-treated at 200 oC for 5 and 30 minutes following quenching. The amount of α-phase in the PVDF increases with an increasing annealing time, which in turn decreases the dielectric constant and dielectric loss. The breakdown dielectric strength of the BZN film increases by mixing PVDF. However, the breakdown field decreases with an increasing annealing time. The BZN-PVDF composite film has the energy density of 4.9 J/cm3, which is larger than that of the pure BZN film of 3.6 J/cm3.

Lithium-ion batteries have been considered the most important devices to power mobile or small-sized devices due to their high energy density. LixCoO2 has been studied as a cathode material for the Li-ion battery. However, the limitation of its capacity impedes the development of high capacity cathode materials with Ni, Mn, etc. in them. The substitution of Mn and Ni for Co leads to the formation of solid solution phase LiNixMnyCo1-x-yO2 (NMC, both x and y < 1), which shows better battery performance than unsubstituted LiCoO2. However, despite a high discharge capacity in the Ni-rich compound (Ni > 0.8 in the metal site), poor cycle retention capability still remains to be overcome. In this study, aiming to improve the stability of the physical and chemical bonding, we investigate the stabilization effect of Ca in the Ni-rich layered compound Li(Ni0.83Co0.12Mn0.05)O2, and then Ca is added to the modified secondary particles to lower the degree of cationic mixing of the final particles. For the optimization of the final grains added with Ca, the Ca content (x = 0, 2.5, 5.0, 10.0 at.%) versus Li is analyzed.

Activated carbons (ACs) have been used as electrode materials of electric double-layer capacitors (EDLC) due to their high specific surface areas (SSA), stability, and ecological advantages. In order to make high-energy-density ACs for EDLC, petroleum pitch (PP) precarbonized at 500–1000°C in N2 gas for 1 h was used as the electrode material of the EDLC after KOH activation. As the pre-carbonization temperature increased, the SSA, pore volume and gravimetric capacitance tended to decrease, but the crystallinity and electrode density tended to increase, showing a maximum volumetric capacitance at a medium carbonization temperature. Therefore, it was possible to control the crystalline structure, SSA, and pore structure of AC by changing the pre-carbonization temperature. Because the electrode density increased with increasing of the pre-carbonization temperature, the highest volumetric capacitance of 28.4 F/cc was obtained from the PP pre-carbonized at 700°C, exhibiting a value over 150% of that of a commercial AC (MSP-20) for EDLC. Electrochemical activation was observed from the electrodes of PP as they were pre-carbonized at high temperatures above 700°C and then activated by KOH. This process was found to have a significant effect on the specific capacitance and it was demonstrated that the higher charging voltage of EDLC was, the greater the electrochemical activation effect was.

Korean foods have the strengths to addresssome of the health problems of modern man. To assess the properties of Korean noodles, daily value %, DVS, DDS and energy density were compared between many kinds of noodles from around the world. Using a variety of reference materials, a nutritional database of noodles was built for this study. For carbohydrate, lipid, vitamin A, vitamin K, vitamin C, niacin, zinc, and copper, the daily values % of western noodles were significantly higher. Also, the serving size of Korean noodles was significantly small. Comparing the average energy density of the noodles, they showed 1.87±0.93 kcal/g (Korean noodles), 2.42±1.08 kcal/g (western noodles) and 1.84±0.84 kcal/g (other noodles). The dietary fiber, polyphenols, and flavonoids content of the noodles showed no significant difference. Neither DVS nor DDS showed a statistically significant difference. In the Korean noodles, the GMDFV pattern showed a diverse choice of food groups. Korean noodles show a lower energy density, and the small serving size to have favorable for the prevention of obesity. Thus, Korean noodles are an excellent choice in terms of diversity and energy density.

Flexible BaTiO3 films as dielectric materials for high energy density capacitors were deposited on polyethyleneterephthalate (PET) substrates by r.f. magnetron sputtering. The growth behavior, microstructure and electrical properties of theflexible BaTiO3 films were dependent on the sputtering pressure during sputtering. The RMS roughness and crystallite size ofthe BaTiO3 increased with increasing sputtering pressure. All BaTiO3 films had an amorphous structure, regardless of thesputtering pressures, due to the low PET substrate temperature. The composition of films showed an atomic ratio (Ba:Ti:O)of 0.9:1.1:3. The electrical properties of the BaTiO3 films were affected by the microstructure and roughness. The BaTiO3 filmsprepared at 100mTorr exhibited a dielectric constant of ~80 at 1kHz and a leakage current of 10−8A at 400kV/cm. Also, filmsshowed polarization of 8µC/cm2 at 100kV/cm and remnant polarization (Pr) of 2µC/cm2. This suggests that sputter depositedflexible BaTiO3 films are a promising dielectric that can be used in high energy density capacitors owing to their high dielectricconstant, low leakage current and stable preparation by sputtering.

A new model and resultant equation for the coagulation of acrylonitrile monomers in precipitation polymerization are suggested in consideration of the surface tension (γ) and cohesive energy density (ECED). The equation was proven to be quite favorable by considering figure fittings from known surface tensions and cohesive energy densities of certain organic solvents. The relationship between scale value of surface tension (γ/M) and cohesive energy density of monomers can be obtained by changing the coagulation bath component for effective precipitation polymerization of acrylonitrile in wet spinning.

TiO2 thin films for high energy density capacitors were prepared by r.f. magnetron sputtering at room temperature.Flexible PET (Polyethylene terephtalate) substrate was used to maintain the structure of the commercial film capacitors. Theeffects of deposition pressure on the crystallization and electrical properties of TiO2 films were investigated. The crystal structureof TiO2 films deposited on PET substrate at room temperature was unrelated to deposition pressure and showed an amorphousstructure unlike that of films on Si substrate. The grain size and surface roughness of films decreased with increasing depositionpressure due to the difference of mean free path. X-ray photoelectron spectroscopy (XPS) analysis revealed the formation ofchemically stable TiO2 films. The dielectric constant of TiO2 films was significantly changed with deposition pressure. TiO2films deposited at low pressure showed high dissipation factor due to the surface microstructure. The dielectric constant anddissipation factor of films deposited at 70mTorr were found to be 100~120 and 0.83 at 1kHz, respectively. The temperaturedependence of the capacitance of TiO2 films showed the properties of class I ceramic capacitors. TiO2 films deposited at10~30mTorr showed dielectric breakdown at applied voltage of 7V. However, the films of 500~300nm thickness depositedat 50 and 70mTorr showed a leakage current of ~10−8~10−9 A at 100 V.

The electrochemical performances of an asymmetric hybrid capacitor were investigated using LiFePO4 as the positive electrode and active carbon fibers(ACF) as the negative electrode. The electrochemical behaviors of a nonaqueous hybrid capacitor were characterized by constant current charge/discharge test. The specific capacitance using LiFePO4/ACF electrode turned out to be 0.87F/cm2 and the unit cell showed excellent cycling performance. This hybrid capacitor was able to deliver a specific energy as high as 178 Wh/kg at a specific power of 1,068 W/kg.

겨울철 유휴 논토양에 헤어리베치를 재배 이용하여 바이오에너지 원료작물인 옥수수를 재배할 경우 화학비료와 제초제를 절감하고, 옥수수의 무경운 재배법을 개발하고자 수행하였다. 헤어리베치 피복 이용 옥수수 무경운 직파재배 시 재식밀도에 따른 옥수수의 간장, 경태 및 엽색도 등은 관행재배에비하여 감소하였으며, 착수고는 밀식할 경우 증가하는 경향이었다. 그 밖의 옥수수의 출사기는 헤어리베치를 피복한 처리구에서 관행재배구에 비하여 평균 3일 지연되었으며, 재식밀도가 높을수록 또는 시비량이 감소될수록 지연되었다. 한편 경작지에서 우점하는 잡초는 여뀌, 바랭이 및 피였으며, 헤어리베치 피복량 증가는 잡초 건물중을 감소시켰다. 바이오에탄올생산량은 헤어리베치를 피복한 처리구에서 관행과 비교하여58.9~89.8%까지 확보할 수 있었으며, 재식밀도가 낮거나 시비량이 적을수록 감소 정도가 크게 나타났다. 바이오에너지 작물인 옥수수를 친환경적으로 생산하는 방법 중의 하나로 헤어리베치를 피복하고 무경운 직파하여 시비량을 50% 감량하고, 재식밀도를 125,000 주 ha-1로 높이면 총 건물수량과 바이오에탄올량을 관행과 유사한 수준을 얻을 수 있을 것으로 판단되었다.

최근 동위원소를 이용한 뼈 스캔 (Bone Scan)검사 후 골밀도 (BMD; Bone Mineral Density)검사를 당일검사로 병행한 경우 이로 인한 골밀도 측정값에 오차 발생 가능성이 제기되고 있으나 방사성의약품 표지화합물 투여 후 이중에너지 X선을 이용한 골밀도 측정값 변화에 대한 임상적 자료가 미비하여 핵의학 체내 검사 후 당일 골다공증 검사의 측정값에 대한 논란의 소지가 있다. 따라서 동위원소 표지화합물인 99mTc-MDP가 골밀도 측정값에 영향을 미치는지 임상적 측면에서 실험하였다. 실험에 참가한 대상자의 평균 나이는 35.17±9.45세로 실험 대상자 17명 중 대사성 질환과 골밀도 측정에 영향을 줄 수 있는 허리뼈 압박골절 및 몸쪽 넓적다리뼈 골절이 있는 자를 제외한 12명 중 정상 골밀도 T-scores〉-1.0의 환자 6명을 대상으로 99mTc-MDP 투여 전·후 측정값을 분석한 결과 허리뼈에서 전·후 각각 평균 0.975±0.084 g/cm², 0.966±0.078 g/cm²으로 0.009 g/cm² 증가, 우측 몸쪽 넓적다리뼈에서는 전·후 각각 평균 0.909±0.078 g/cm², 0.913±0.086 g/cm²으로 0.004 g/cm² 감소, 좌측 몸쪽 넓적다리뼈에서는 각각 평균 0.887±0.099 g/cm², 0.881±0.103 g/cm²으로 0.007 g/cm²의 증가를 보여 몸쪽 넓적다리뼈 보다 허리뼈에서 더 큰 골밀도 변화를 보여주었다. 그러나 허리뼈와 몸쪽 넓적다리뼈 전체에서 전·후 변화 평균은 0.0038±0.014 g/cm²으로 골밀도 측정값에 유의한 영향이 없음을 알 수 있으며, 또한 두 실험간 전체 상관계수는 0.987으로 방사성동위원소 표지화합물인 99mTc-MDP 투여가 골밀도 측정값에 영향을 주지 않았다. 따라서 140 keV의 감마선 에너지를 방출하는 테크네슘 표지화합물을 이용한 뼈 스캔검사 후 골밀도 측정값에 유의한 영향을 미치지 않음을 확인하였다. 그러나 핵의학적 체내검사와 골다공증 검사를 당일로 검사함으로 인한 환자의 피폭을 고려한다면 시간 간격을 두고 검사를 시행하는 것이 좋을 것으로 사료된다.

이중에너지 X-ray 골밀도 측정기를 이용하여 폐경 전 여성들을 대상으로 골밀도에 영향을 규명하기 위하여 폐경기 이후에 증가하는 골다공증의 예방에 기여하고자 수행하였다. 연구 대상자의 골감소증은 20.2%였으며, 골밀도 수치를 예측할 수 있는 가장 중요한 인자는 연령 이었다. 연령이 높을수록 유의하게 낮은 골밀도를 보였다. 운동에 있어서는 운동을 안하는 것보다 운동을 하는 것이 골밀도에 더 좋은 영향을 미치며, 적정한 운동을 하는 것이 골밀도에 좋은 영향을 미치는 것으로 나타났다. 식생활에 따른 골밀도는 채식 위주의 식사보다는 육식위주의 식사를 선호하는 경우 골밀도에 유의한 영향을 미치는 것으로 나타났고, 생리주기가 짧 을수록 골밀도가 유의하게 높았다. 골밀도와 관련요인에 대한 다중회귀분석에서는 연령이 증가할 유의하게 골밀도가 낮게 나타나 연령이 골다공증의 위험요인으로 나타났다.