A combination of a series of epoxy coatings filled with octadecylamine (ODA)-modified graphene oxide (mGO) or commercial exfoliated graphite nanoplatelets (xGnP) was developed to boost the anticorrosion performances of mild steel substrates in acidic and NaCl aqueous solutions. The xGnP and mGO were applied successfully as fillers for the preparation of layer by layer (LBL) xGnP or mGO/epoxy coatings, respectively, which were coated on the clean steel surfaces to form LBLassembled layers. The LBL-assembled xGnP or mGO/epoxy coating-coated steel substrates exhibit excellent anticorrosion performances. The corrosion potentials (Ecorr) of xGnP-1/xGnP-2/3 and mGO-1/mGO-2/3 display at − 193 and − 150 mV, respectively, while Ecorr of the bare steel shows at − 871 mV of immersion in the 3.5 wt% NaCl solution. The most positive Ecorr values are obtained for xGnP-1/2/3 (− 117 mV) and mGO-1/2/3 (− 66 mV), showing the best anticorrosion performances compared to the bare steel (− 404 mV) in 17 wt% HCl solution.

Combination of liquid-phase exfoliation and hydrothermal method has progressed in recent years mainly on production of 2D materials. In this study, graphene was successfully synthesized via combinatorial of liquid-phase exfoliation and hydrothermal method with the aid of various conductive surfactants perylene-3, 4, 9, 10-tetracarboxylate (PTCA), lithium perylene-3, 4, 9, 10-tetracarboxylate (LiPTCA) and sodium perylene-3, 4, 9, 10-tetracarboxylate (NaPTCA). The effect of the lithium ( Li+) and sodium ( Na+) cations toward the efficiency of the graphene exfoliation process and its electrical properties was thoroughly investigated. Based on the characterization techniques, it is revealed that NaPTCA is the ideal conductive surfactant to exfoliate graphene sheets. X-ray diffraction spectra verified that the Na+ cation certainly can enhance the exfoliation process by expanding the interlayer spacing. The lateral size of the graphene sheets with Na-PTCA surfactant was the smallest (4.17 μm) as observed from SEM micrograph. The maximum concentration of the graphene yield was achieved up to 0.151 mgmL− 1 in NaPTCA surfactant alongside with excellent electrical conductivity of 746.27 Sm− 1 and relevant specific capacitance of 129 Fg− 1.

For practical applications of graphene sheets in a variety of fields, mass production of high-quality graphene sheets is necessary. Herein, we reported a cost-effective, green, and simple approach to synthesizing mass production exfoliated graphene (EG) flakes employing electrochemical exfoliation of pencil graphite in neutral aqueous electrolytes. Pencil graphite cores of different grades were applied as anode and cathode electrodes and exposed to the electrolyte solution at a different voltage. Several parameters were examined and optimized, including pencil grade (2,4,6,8 B), applied voltage (10, 15, 20, 30 V), different inorganic electrolytes ((NH4)2SO4, Na2SO4, NaNO3, NaCl, and CH3COONa), and the concentration of electrolytes. The optimal condition was chosen by considering the mass of produced graphene and the conductivity of the graphene solution. The optimal conditions were as follow: pencil grade: 6B; applied voltage: 10 V; electrolyte type: Na2SO4; electrolyte concentration: 0.1 M. Under these conditions, the production yield was > 95% within 3 h and 9 min. The EG was characterized by utilizing FT-IR, XRD, Raman spectroscopy, FE-SEM, Cyclic Voltammetry, and Electrochemical Impedance Spectroscopy (EIS). Characterization indicates that the synthesized EG had an XRD peak at 2θ = 26.6° and an ID/ IG ratio of 0.36. Furthermore, the EG showed good conductivity when tested by cyclic voltammetry and EIS whereas the R2 values were 985.8 and 76.3 Ω for bare GCE and EG/GCE, respectively. In addition, EG effectively removed cadmium (Cd(II)) with an adsorption level of 8.72 mg/g. The results from this study suggest that EG can be scaled up and commercialized in an environmentally friendly and low-cost manner, especially in low-income countries, and using it to rectify metal ions.

Facile process for the fabrication of multi-layer graphene thin film (MLGF) is reported here. Multi-layer graphene dispersion prepared by liquid-phase exfoliation of graphite was sprayed on a glass substrate by spray pyrolysis method. The structural, optical and electrical properties of the deposited MLGF are investigated. The sheets of graphene are deposited uniformly on the substrate and distribution of small graphene sheets with size of 300–500 nm can be observed in SEM image. AFM and micro-Raman results ensured that the spray-coated graphene thin film is composed of multi-layer graphene sheets. Spray coated graphene thin film showed significant optical transparency of 57% in the visible region (400–550 nm). MLGF possessed the electrical conductivity in the order of 744 S/m with surface resistivity of 3.54 k Ω/sq. The prepared liquid-phase exfoliated graphene thin film showed superior photoelectric response. The results of this study provided a framework for fabricating an optimized MLGF using a spray pyrolysis route for optoelectronics devices.

Among various methods to produce graphene sheets, electrochemical exfoliation has been regarded as an effective method for the mass production of high-quality graphene sheets because of its simplicity and environmental friendliness. However, conventional electrochemical exfoliation has a disadvantage of accumulating intercalating ions at graphite interlayers owing to the use of a constant voltage. In this study, we developed a DC switching technique to achieve more efficient intercalation of ions than that in the conventional method. In the DC switching method, positive and negative voltages are successively applied to release the accumulated intercalating ions. By testing various conditions, we found the optimum switching time to produce high-quality graphene sheets with the highest yield rate and the highest electrical conductivity. As a result, the graphene sheets using this DC switching technique showed 85% higher yield rate, 193% higher electrical conductivity, 160% larger area, and 25% thinner thickness than those obtained when using a constant DC method. We believe that this DC switching technique can be used for large-scale production of high-quality graphene sheets.

Low cost and scalable manufacturing of highly doped cellulose for enhanced multifunctional applications is still an issue. In this work, eco-friendly nanocomposites were fabricated by incorporating regenerated cellulose (RC) of 10, 30, and 50 wt% into an exfoliated graphene nanoplatelets (GNPs), resulting in the intercalation of GnPs. The thermal and electrical properties of hybrid nanocomposites were investigated. The structural property was conducted through scanning electron microscope and X-ray diffraction analyses. Strong frequency-dependent dielectric response was found due to the change of the permittivity and the loss tangent of nanocomposites by different content of RC, which is associated with the polarizations behavior. Non-elastic relaxation at the GNPs–RC chains interfacial areas in an alternating field was identified as the main cause of polarization losses among others. Detailed ferroelectric measurements provided the evidence of the ideal resistive behavior of the nanocomposites, which are confirmed by the resistivity measurements along the out-of-plane direction of the nanocomposite sheets.

High-quality and solution processable graphene sheets are produced by a simple electrochemical exfoliation method and employed as a high-power anode for lithium-ion batteries (LIBs). The electrochemically exfoliated graphene (EEG) composed of a few layers of graphene sheets, have low oxygen content and high C/O ratio (~ 14.9). The LIBs with EEG anode exhibit ultrafast lithium storage and excellent cycling stability, but low initial efficiency. The excellent rate capability and cycling stability are attributed to the favorable structural and chemical properties of the EEG, but the large irreversibility needs to be overcome for practical applications.