검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 114

        41.
        2018.11 구독 인증기관·개인회원 무료
        일상생활에서 접할 수 있는 탄산음료는 전 세계적 상업 음료 시장의 매우 큰 부분을 차지한다. 기존에 이와 같은 탄산음료를 제조하는 방식은 보통 배치형의 기계적 공정 (McCann 탄산기, 제트 믹서 등)을 통해 이루어져 왔다. 하지만 이와 같은 기계적 교반을 동반한 탄산화 공정은 연속식 운전이 어려우며 물질전달 상의 한계점이 존재한다는 단점이 있다. 본 연구에서는 이런 단점을 탈피하여 기존의 배치형 탄산화 장치를 대체할 수 있는 초소형 연속식 탄산화 장치를 할로우 파이버 시스템을 통해 제안하고자 한다. 특히 이산화탄소 기체 버블이 발생하지 않으며 물로 이산화탄소를 직접 전달할 수 있는 이와 같은 시스템은 여러 산업 분야의 응용이 가능할 것으로 예상된다.
        43.
        2018.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 고온다습한 하절기에 음수의 형태가 닭의 생산성, 육질, 혈액의 성상에 미치는 영향을 구명하고자 실행하였다. 8일령 로스종 360수를 4개 처리구인 수돗물, 이온수, 냉수 및 냉이온수(냉수+이온수)로 처리구당 6반복으로 평사에 수용하여 5주령까지 급수하였다. 계사내부 평균 온도와 습도는 30.9℃와 74.0%였으며, 수돗물의 평균온도는 29.5℃였다. 이온수는 정전기를 이용하여 물을 이온화하였고, 냉수는 15℃로 고정하여 급수하였다. 증체량, 사료섭취량 및 사료요구율은 주간으로 측정하였으며, 혈액과 계육 샘플은 실험 종료시에 채취하였다. 사육전기 21일령에 증체량은 수돗물 처리구에서 다른 처리구에 비하여 낮았지만 통계적 차이는 없었으며, 사육후기의 35일령에 이온수, 냉수, 냉이온수 처리구에서수돗물 처리구에 비하여 현저하게 높게 나타났다(p<0.01). 사료섭취량은 증체와 동일하게 사육전기에는 처리구간에 일관적 차이가 없었지만 사육후기에 수돗물 처리구에 비하여 다른 처리구에서 매우 개선 되는 경향을 보였다(p<0.01). 사료요구율은 사양실험 전기간에서 이온수, 냉수 및 냉이온수 처리구에서 매우 개선되었다(p<0.05). 계육의 가슴살에서 명도는 수돗물 처리구에서 높게 나타났으며, 적색도는 낮은 경향을 보였다. 황색도는 일관성이 없었지만 pH는 수돗물 처리구에서 다른 처리구에 비하여 낮게 나타났다(p<0.05). 조리감량은 이온수, 냉수 및 냉이온수 처리구에서 수돗물에 비하여 매우 낮았지만(p<0.05) 연도는 높은 경향을 보였다. 혈중 알부민과 단백질은 처리구간에 차이가 없었지만, 중성지방은 이온수, 냉수 및 냉이온수 처리구에서 낮은 경향을 보였다(p<0.05). 혈중 포도당은 처리구간에 차이가 없었지만 HDL 콜레스테롤은 이온수, 냉수, 냉이온수 처리구에서 수돗물 처리구에 비해 현저하게 높게 나타났다(p<0.05). 본 실험 결과 혹서기 육계에 냉이온수 급수는 생산성 및 육질을 개선하고 혈중HDL을 높게 하였다.
        4,000원
        44.
        2017.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this research, we have calculated characteristics of wave-piercing high-speed planing hull, by using a RANS solver and overset grid method, for comparing with experimental measurements of that and simulating with several appendages, since the computed results of commercial CFD code look reasonable for the prediction of the performances of planing hulls on calm water in planing conditions. As a result, it is confirmed that the dynamic instability phenomena in pitch and heave motions (porpoising) occurred after a certain FnV, and effectively suppressed using some of appendages, especially the 0.5L spray rail is suppressed to 24-55 % in the pitch motion and 33-55 % in the heave motion. In spray phenomenon, 1L hard chine suppress spray effectively and it is effective to set the angle of appendages to be less than 0° in order to suppress wave.
        4,000원
        45.
        2017.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이상 고수온을 감지하기 위한 생물모니터링 시스템(BMS) 연구를 위해, 4단계의 수온(5, 10, 20와 30℃)에서 참굴 패각운동을 측정하였다. 모든 참굴은 실험시작 전에 3일 동안 절식을 통하여, 먹이섭이 및 배출에 따른 패각운동의 요인을 제거하였다. 5℃ 실험구에서는 패각운동이 관찰되지 않았지만, 수온의 증가와 함께 패각운동은 증가하였다(10℃ : 6.31±2.18 times/hr, 20℃ : 22.0±10.0 times/hr). 30℃에서는 5℃와 같이 패각운동이 전혀 보이지 않았던 실험구와 20℃와 유사한 패각운동이 실험구가 나타났다. 이는 30℃ 이상에서도 20℃와 같은 신진대사를 보이는 개체군이 있었으나, 대부분이 신진대사의 활력의 감소에 기인하여 폐각상태가 지속되는 것으로 나타났다. 따라서 참굴 양식장에 고수온 감지를 위한 참굴 패각운동 BMS를 설치한다면, 경계단계는 빠른 패각운동(약 30.0회/hr 이상)일 때, 심각단계는 수시간 이상 폐각상태일 때, 조기경보(early warning)를 내릴 수 있을 것이다. 따라서 참굴 패각운동을 활용한 BMS는 이상고수온의 조기경보에 대하여 효과적으로 활용이 가능할 것으로 판단된다.
        4,000원
        46.
        2017.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        무기실리카 입자로 구성된 고탁도 원수를 처리하는 침지식 정밀여과 운전에서 휴민산과 2가 양이온의 존재유무에 따라 시간에 따른 파울링 저항을 관찰하였다. 공기폭기로 인한 무기실리카 입자의 파울링 감소효과는 휴민산과 칼슘이 혼합 으로 존재 시 감소하였다. 파울링층의 전자현미경 관찰결과 칼슘의 존재 시 휴민산의 무기실리카 입자 표면흡착이 관찰되었 다. 이는 멤브레인 표면에 조밀한 파울링층을 형성시켜 공기폭기 효과를 감소시킨 것으로 판단된다. 용액의 조성에 따른 고탁 도 원수의 탁도 제거율에는 큰 변화가 없었으나 공기폭기량에 따라 칼슘과 무기실리카 입자의 혼합 존재 시 유기물질의 제거 율은 80% 이상으로 증가하였다. 이는 공기폭기 하에 무기실리카 입자 표면에 흡착된 일부 휴민산들이 멤브레인 표면으로부 터 함께 역수송 되어 유기물질 제거율을 증가시킨 것으로 사료된다.
        4,000원
        47.
        2016.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Modified coagulants were investigated for the removal of phosphorus from secondary effluent of wastewater treatment. The modified coagulants were prepared by mixing alkali earth metal ions such as calcium and magnesium. The basicity of a coagulant influenced on the removal of phosphorus, and coagulants with basicity of 5.9% showed a better removal of total phosphorus than that of 38.5%. Also, coagulants with alkali earth metals enhanced the performance of coagulation by 10% and resulted in 67.1% for total phosphorus removal. Moreover, the removal of suspended solids and chemical oxygen demand was improved using coagulants with low basicity and earth metal ions. Results of this study demonstrated that the use of coagulants with low basicity, and calcium and magnesium ions is recommended to improve wastewater effluent quality.
        4,000원
        49.
        2016.04 구독 인증기관·개인회원 무료
        The purpose of this research was to investigate the effect of weighting agent (WA) and high pressure homogenization (HPH) on the stability of water-in-oil-in-water double emulsion (DE). To prepare oil phase (O), olive oil, glycerol ester of wood rosin (WA; variable 1), and polyglycerol polyricinoleate (lipophilic emulsifier), and for interior water phase (W1), deionized water, gelatin, sodium chloride, ascorbic acid, and green tea extract(core material) were mixed and heated. When temperature of O and W1 reached up to 60℃, W1 was dispersed into O dropwisely followed by magnetic stirring at 1500 rpm for 2 min (O:W1=3:1). By applying homogenization at 4000 rpm for 2 min followed by ultrasonication for 4 min, water-in-oil primary emulsion (PE) was produced. And resting PE at 4℃ for 30 min was followed. For exterior water phase (W2), deionized water, sodium chloride, ascorbic acid, and polysorbate 80 (hydrophilic emulsifier) were mixed. When temperature of PE reached at room temperature (24 ± 2℃), PE was dispersed into W2 dropwisely followed by magnetic stirring at 1500 rpm for 15 min (PE:W2=1:3). By applying ultrasonication for 2 min followed by HPH at 500 bar for 1 to 3 times (variable 2), DE was produced. When DE was freshly produced, phase separation occurred at different period of time depending on whether variable 1 and 2 were applied or not (from 5 min to more than a day). The structure of DE was observed through optical and transmission electron microscopy. And relationship between the mean size of oil droplets and the occurring time of phase separation was studied. DE can be used as an appropriate delivery system for co-loading both hydrophilic and lipophilic bioactive compounds simultaneously, and promoting industrialization as well by applying it to food products, for example, beverage.
        52.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study involved the shape of water jet nozzle to promote blasting ability and an increase of projection distance when cleaning VLBC cargo hold. Furthermore, I researched the effect of pressure, length of reducer, nozzle caliber size and nozzle shape on the nozzle through CFD simulation. Simulation of water jet projection process inside VLBC cargo hold was done in both 2D and 3D environment. Simulation results show installing suitable nozzle can increase the cleaning effect of cargo hold.
        4,000원
        55.
        2014.05 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Silica nano-powder (SNP) is an inorganic material able to provide high-performance in various fields because of its multiple functions. Methods used to synthesize high purity SNP, include crushing silica minerals, vapor reaction of silica chloride, and a sol-gel process using TEOS and sodium silicate solution. The sol-gel process is the cheapest method for synthesis of SNP, and was used in this study. First, we investigated the shape and the size of the silica-powder particles in relation to the variation of HCl and sodium silicate concentrations. After drying, the shape of nano-silica powder differed in relation to variations in the HCl concentration. As the pH of the solution increased, so did the density of crosslinking. Initially, there was NaCl in the SNP. To increase its purity, we adopted a washing process that included centrifugation and filtration. After washing, the last of the NaCl was removed using DI water, leaving only amorphous silica powder. The purity of nano-silica powder synthesized using sodium silicate was over 99.6%.
        4,000원
        56.
        2013.03 구독 인증기관 무료, 개인회원 유료
        In this study, expedite curing period at curing temperature being 40, 60, 80℃ similar to strength of standard 28days curing temperature to confirm methods and applicability of early estimation of strength by warm water curing. Also, checked the effect related to different conditions such as using various kinds of material, differentiating quantity of material, with or without fiber mixing at same rate of water-bonding material. Existing method proposed by KS and JIS to estimate strength of 28 days standard curing temperature curing for 7days at 40℃ is not relevant because it takes so long to estimate strength. Already known method of estimating strength of 28days standard curing temperature curing for 3days in 60℃ warm water, too, is not relevant to apply 3day cycle of super high-rise. It also had the problem which didn’t consider fiber mixed concrete. According to the result of experiment, traits and rate of strength revelation were different relating to the kinds and quantity of bonding material. Strength value of mix without fiber was higher than that of mix with fiber, but without any relation to that, over 96% of similar confidence level with strength of 28 days standard curing temperature was shown in 7 days at 40℃, 3 days at 60℃, 2days at 80℃. Confidence level of estimation method of 2 days at 80℃ was similar to those of estimation methods of 4 days at 40℃, 3 days at 60℃, so it(2 days at 80℃) is regarded as the most relevant method because it’s possible to estimate strength fastly. As a result it can be said that early quality control of recently increasing super high-rise may be possible through estimation method of 2 days at 80℃.
        4,000원
        57.
        2012.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        정수처리용 알루미나 정밀여과 및 광촉매의 혼성공정에서 주기적 질소 역세척 시 휴믹산 농도의 영향을 알아보고, 막오염에 의한 저항 (Rf) 및 투과선속 (J), 총여과부피 (VT) 측면에서 정밀여과의 물 역세척 또는 한외여과의 질소 역세척한 기존 결과와 비교 고찰하였다. 그 결과, 휴믹산 농도의 영향으로 막오염이 진행되는 경향은 질소 또는 물 역세척에 따라, 동일한 재질이라도 한외여과 또는 정밀여과에 따라 차이를 보였다. 또한 동일한 재질의 분리막의 경우 한외여과 보다 정밀여과에서 질소 역세척이 막오염 억제에 효과적이고, 동일한 정밀여과인 경우 물 역세척보다 질소 역세척이 효과적이었다. 탁도 처리효율은 휴믹산 농도와 무관하게 거의 일정하였으나, 휴믹산 처리효율은 휴믹산 10 mg/L에서 최대였다. 이러한 결과로부터 정밀여과막의 질소 역세척시 휴믹산의 농도가 증가할수록 처리수의 휴믹산 농도도 높아지지만, 휴믹산 농도 10 mg/L에서 광촉매 구의 흡착과 광산화로 휴믹산이 최대 효율로 제거된다는 것을 알 수 있었다.
        4,000원
        58.
        2012.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 pressure retarded osmosis (PRO) 분리막의 구조적 특성이 미치는 영향에 대하여 수행되었다. 이를 위해, 유사 분자구조를 가지며 자유부피는 차이가 나는 BPS-XX, BisA-XX가 선택되었다. BPS-XX와 BisA-XX는 축중합 반응을 통해 합성되었으며, 또한 더 세분화된 결과를 위해서 20~60 mol.%로 술폰화되었다. 자유부피의 변화에 따른 분리막의 특성을 입증하기 위해서 몇 가지 특성평가가 진행되었다. 연구 결과에서 동일 분자구조에서 자유부피가 증가하면 막의 투과도가 증가하였고, 선택도는 감소하였다. 본 연구의 투과도-선택도 결과에서, 분자의 기본 구조와 자유부피 조절에 따라서, 고 투과도와 선택도를 가진 막을 제조 가능함을 알 수 있었다.
        4,000원
        59.
        2012.09 구독 인증기관 무료, 개인회원 유료
        In this study, prediction of later-age compressive strength of ultra-high strength concrete, based on the accelerated strength of concrete cured in hot water was investigated. Comparing other acceleration method, hot water curing method is relatively easy and intuitive to use in the real construction site. The amount of time for evaluation of the concrete strength using the hot water curing method in KS and JIS is too long to predict the strength of the ultra-high strength concrete that are used in the tall building structure. For that reason, curing temperature of 40, 50, 60℃ 3 levels were examined to shorten the amount of time for the evaluation of the strength. When curing in warm water, different strength characteristics are verified from the experiment. In case of F3 substituting 30% fly ash in combination, because of the curing temperature sensitivity of fly ash, differences of strength expression velocity was verified according to the curing temperature at the same age. In case of B4 substituting 40% ground granulated blast furnace slag, there were no big strength expression velocity differences of the specimen cured in 3 different level of curing temperature(40, 50, 60℃). The results show reliable accuracy by regression relation between 28day strength cured by standard curing method and accelerated strength of concrete cured in warm water.(y=1x-0.0002 R2=0.9866) As a result, the feasibility of 3day-prediction was confirmed using warm water curing method with accelerated strength of concrete cured for three days in warm water.
        4,000원
        60.
        2012.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 정수처리용 알루미나 정밀여과 및 광촉매의 혼성공정에서 물역세척 주기(filtration time, FT) 변화의 영향을 알아보고, 탄소 정밀여과막 또는 알루미나 한외여과막을 사용한 기존 결과들과 비교하였다. 물역세척 시간(BT)는 10초로 고정한 채, FT를 2~10분으로 변화시키면서, 그 영향을 180분 운전 후 막 오염에 의한 저항(Rf), 투과선속(J)과 총여과부피(VT) 측면에서 고찰하였다. FT가 감소할수록, Rf 는 감소하고 J는 증가하여 탄소 정밀여과막 또는 알루미나 한외여과막을 사용한 기존 결과들과 동일하였다. 탁도의 처리효율은 98.1% 이상으로 높게 나타났으며, FT 변화에 의한 영향이 보이지 않아 탄소 정밀여과막을 사용한 기존의 결과와 유사하였다. 한편, 유기물의 처리효율은 FT 8분 조건에서 89.6%로 가장 높았으며, FT 변화의 영향이 보이지 않았고 기존의 결과들보다 다소 높은 유기물 제거율을 보였다.
        4,000원
        1 2 3 4 5