In this study, we have modeled a subsonic diffuser with rectangular prism and tried to investigate the influence of a turbulent wake flow by numerical simulation using computational fluid dynamics based on steady-state Navier-Stokes equation and standard k-ε model. A commercial CFD program, FLUENT, is used on the analysis. The turbulent wake is generated by a rectangular prism, which is installed at the diffuser. Flow Uniformity Showed the best results in the case of AR=1:1 and tended to be uniform in the critical point at Re=8.8×103

In this study, we have modeled a wide angle diffuser with rectangular prism and tried to investigate the influence of a turbulent wake flow by PIV and a numerical simulation using computational fluid dynamics based on steady-state Navier-Stokes equation and standard k-ε model. A commercial CFD program, FLUENT, is used on the analysis. The turbulent wake is generated by a rectangular prism, which is installed at the diffuser. The results show that it is possible to flow control by installing a rectangular prism within the diffuser and velocity recovery is the highest in aspect ratio 1:1.

In this study, a computational work to investigate the influence of a turbulent wake flow by a rectangular prism with different aspect ratio, which is installed at the inlet of a diffuser. The k-ω model was adopted to simulate the turbulence. The continuity and time averaged Navier-stokes equations were solved by a implicit finite volume scheme. The computational results are qualitatively well compared to existing experimental data by PIV. The results show that the velocity recovery of the subsonic diffuser is dependent on the aspect ratio of rectangular prism.

In this study, a experimental work to investigate the influence of a turbulent wake flow on the velocity distribution of a diffuser with PIV method. The turbulent wake is generated by a rectangular prism, which is installed at the inlet of a diffuser. The results show that the velocity recovery of the subsonic diffuser is dependent on the height and location of rectangular prism. It is found that a certain height of the rectangular prism to generate the turbulent wake give a better velocity recovery, compared with no rectangular prism.

Flow control of flow field is essential to design efficient elements relating to fluid machineries. In this study, flow characteristics of rectangular prism with center gap through-flow at different aspect ratio was investigated to flow control. It was used a FLUENT 6.3 version to study flow field. It was found that the through-flow disturbs the development of vertical velocity component and decreased the vortex size and critical value of a rapid change in pressure coefficient distribution.