Reducing underwater radiated noise from a ship is a critical issue for ensuring the survivability of the vessel. As high-speed signal processing and interlocking algorithms become more sophisticated, the heat intensity of shipboard equipment is increasing per unit volume. When designing shipboard equipment, it is necessary to consider the trade-off between heat dissipation and noise reduction. Following an analysis of the trade-offs, it was determined that the arrangement of Fan Ass'y A and B exhibited excellent noise and heat dissipation characteristics. Based on this, PWM control operating zones were derived. It was determined that the placement of Fan Ass'y A and B in the operating zone would increase the PWM duty cycle from 33% to 58% using a signal frequency of 25kHz band with guaranteed reliability. This would increase the noise by approximately 9dB(A) but reduce the internal board reference temperature by up to 15℃.

In this study, we performed thermal safety design of the electric module of a heat-loaded equipment with consideration of its heat dissipation performance. Initially, we calculated the heat dissipation of natural convection to choose a cooling method. Based on this, we found that some modules required forced convection and selected an air-cooling method with an outdoor temperature of 43 degrees Celsius, which is the maximum temperature in Korea. Prior to module production, we performed thermal analysis of each module and proceeded with a design to increase the thermal conductivity of the module as a primary step, and subsequently proceeded with Heat Sink design to maximize the heat dissipation performance. After considering various constraints according to the system requirements and designing the cooling path, we experimentally and analytically secured thermal safety at the operating temperature of the equipment.