Virtual reality (VR) simulation in nursing education, especially in the teaching of VR simulations just prior to clinical practice, has the potential to enhance the effectiveness of clinical practice and better prepare nursing students for patient care. The aim of this study was to evaluate the effect of a preclinical VR simulation education program on the development of critical thinking, self-efficacy, problem-solving ability, and perceived clinical competency among undergraduate nursing students. The study was conducted between May and June 2021 using a pretest-posttest design with a control group. A total of 42 nursing students were recruited through convenience sampling from two separate classes. The intervention group participated in VR simulation education, while the control group engaged in lecture-based education, before beginning clinical practice. Assessments were conducted before preclinical education and after completing clinical practice using structured questionnaires. The data was analyzed using chi-square tests, independent t-tests, and ANCOVA. The findings indicated that the intervention group had a significantly higher score in perceived clinical competency compared to the control group (F = 5.25, p = 0.029) after controlling for pretest scores. However, there were no statistically significant differences in critical thinking, self-efficacy, or problem-solving abilities between the two groups. These findings suggest that preclinical VR simulation education is partially effective in preparing nursing students for their clinical practice, underscoring the need for a balanced educational approach that integrates VR with clinical practice to develop a full spectrum of nursing skills and knowledge.

This study analyzes the body shapes of lower-body obese female adolescents and proposes a slacks pattern suitable for their body type. Lower-body obesity is a prevalent type of teenage obesity, and our proposals aim to improve consumer satisfaction in ready-to-wear clothes across this demographic. We first observe characteristics of obese lower bodies, noting significantly above-average thigh and hip circumference. These figures indicate a high degree of curvature in obese lower bodies, along with a large drop value. Leveraging this data, we develop a novel slacks pattern using 3D avatars in a virtual simulation system. The formulas for the main areas of the pattern are as follows: front waist girth W/4+0.75cm+0.5cm, back waist girth W/4+0.5cm– 0.5cm, front hip girth H/4+1.25cm–0.5cm, back hip girth H/4+2cm+0.5cm, front crotch extension H/16+0.5cm, back crotch extension H/8+1cm. Results from appearance evaluations show that this pattern minimizes strain rate on the waist and hips, and its average score is significantly higher than that of an alternative pattern that was also evaluated. The minimized strain rate and high average score indicate that our pattern assigns a sufficient amount of space to the appropriate areas. Based on these results, we expect our research to inform slacks pattern development and production for obese consumers of all types.

This study aimed to explore nursing students' experience of learning cardiopulmonary resuscitation (CPR) in a web-based virtual simulation (vSim) through analysis of the reflection journals. Method: From June to July 2020, data were collected from 48 fourth-year nursing students who performed the simulation by reviewing prompt feedback on their CPR performance. The contents of the reflection journals were analyzed using NVivo qualitative data analysis software. Results: Nursing students experienced unfamiliarity with the English-based virtual environment as well as psychological pressure and anxiety about emergencies. Incorrect interventions were identified in the following order of frequency: violation of defibrillator guidelines, missing fundamental nursing care, error in applying an electrocardiogram monitor, inadequate initial response to cardiac arrest, insufficient chest compression, and inadequate ventilation. Lastly, the participants learned the importance of embodied knowledge, for knowing and acting accurately and reacting immediately, and their attitudes as nurses, such as responsibility, calmness, and attentiveness. Learning strategies included memory retention through repetition, real-time feedback analysis, pre-learning, and imagining action sequences in advance. The level of achievement, time required, CPR quality, and confidence improved with behavior-modification strategies developed through self-reflection. Conclusion: Educational interventions that are based on understanding accurate algorithms can strengthen selfawareness of mistakes to improve efficient imparting of CPR education.

This study seeks to increase the satisfaction of elderly men when purchasing and wearing ready-to-wear clothes by designing a slacks pattern suitable for their body type, which is determined by analyzing their lower bodies using virtual avatars and 3D virtual simulation system. The study found the following. First, based on virtual visualization of the comparison slacks pattern, the waistline position was consistently the lowest scored question among the evaluation survey items. Interpretation of this dissatisfaction suggests that, because the front waistline falls below the abdomen, the lower body, and especially the abdominal shape, is unpleasantly emphasized. Second, by using a virtual simulation system, the study developed a new slacks pattern that considered the concerns of elderly men. The primary measurement changes were as follows: front waist girth W/4+1.5cm+0.5cm, back waist girth W/4+1.5cm–0.5cm, front hip girth H/4+2.5cm–0.5cm, back hip girth H/4+2.5cm+0.5cm. Third, the new slacks pattern’s appearance was evaluated more highly than the comparison pattern, confirming the new pattern’s appropriateness for elderly men. This study demonstrates how slacks and other clothing patterns designed in a 3D virtual garment simulator can be used to design more appealing clothing for elderly men, increasing the satisfaction of wearing ready-made clothes at older ages.

The decommissioning process of Kori Nuclear Power Plant No.1, which was permanently suspended in 2017, various studies and attention on the decommissioning of nuclear power plants and waste management are being focused. In particular, decommissioning of high-risk facilities should take into account both safety and economic aspects. Small defects in the decommissioning process may lead to major disasters, and the resulting economic losses will cause enormous damage at the national level. In order to prevent such damage, various decommissioning process simulations within a virtual environment should be performed, and process errors and results should be collected and analyzed through simulation to derive the optimal decommissioning scenario as possible. The platform introduced in this paper builds a virtual environment based on drawing and modeling data of Kori Nuclear Power Plant No.1 and automatically creates an optimized cutting path for dismantling the facility and internal structure, and simulates a cutting process similar to reality using Robot Arm. In addition, it is possible to derive and analyze a cutting process scenario by processing process results such as time required for work and cutting distance collected through simulation.

Purpose: Since the COVID-19 pandemic, virtual simulation practice has been increasingly activated as an alternative to clinical practice in nursing colleges. This study aimed to provide basic data by confirming changes in self-efficacy and nursing knowledge in the virtual simulations of nursing students, and identifying virtual presence, virtual patient learning system evaluation (VPLSE), and practical satisfaction. Methods: This was a single-group pre-post quasi-experimental study. The subjects were 28 third-grade nursing students. Results: Self-efficacy and nursing knowledge increased significantly (p<.001). Virtual presence had a significant positive correlation with VPLSE) (p=.002) and practice satisfaction (p=.011). There was also a significant positive correlation between virtual simulation learning evaluation and practice satisfaction (p<.001). Conclusion: Based on these results, virtual simulation practice can be used with clinical practice as an educational method to improve nursing students' self-efficacy and nursing knowledge in nursing education. Virtual presence was confirmed as a significant variable to improve practice satisfaction and VPLSE. It is necessary to develop a virtual simulation program that can improve virtual presence through collaboration with virtual reality technology experts.

Purpose: This study aimed to explore the meaning of simulation practice after experiencing virtual simulation for nursing students with clinical practice experience. We attempted to determine a nursing simulation strategy as an alternative to the clinical practice in the COVID-19 pandemic. Methods: The participants were seven nursing students who experienced clinical practice and completed alternative virtual simulation practice in the COVID-19 pandemic. The data were collected through in-depth interviews and analysed using the phenomenological methodology. The key question was “what is the meaning and nature of child health nursing practice using virtual simulation in the COVID-19 pandemic?” Results: The significant statements were categorized into 14 themes, 7 theme clusters, and 2 categories. The categories extracted were “a sense of difference between virtual and reality” and “experience systematic learning transfer.” Conclusion: Practical education through nursing simulation is important for students to experience a systematic and efficient learning. Additionally, simulation educators should produce various efforts to help students achieve the learning outcomes, such as scenarios, class environments, and instructor preparation, to reduce their sense of separation from practice.

To obtain the gamma-ray energy spectrum of artificial radionuclides which is difficult to obtain practically, virtual gamma-ray energy spectrum simulator program was developed. It can be applied for the predetermined measurement condition for which the database was developed through computational simulation and actual measurement of background radiation. For gamma spectrometry training for KHNP HPGe detectors using this program, the database for KNPG HPGe detectors was developed. First, the geometry of the detector in the simulation was adjusted to resemble the real structure by comparing the actually measured net counts rate at the main gamma peak with the value simulated by MCNP6. The Certified Reference material (CRM) of 137Cs and 60Co were used for verification. The comparison was made with respect to the situation where CRM was attached to the top and side of the detection part of the considered detector. The geometry structures of detectors were simulated by reflecting the design drawing of the products, and the simulation was performed for several thicknesses of the Ge/Li dead layer in consideration of the change in the thickness over time. As the results, the simulation geometry was tuned so that the results for 137Cs showed a difference within 10% for all detectors. At this time, in some detectors, the result for 60Co shows a 10% higher error, which is estimated to be due to the random summing. It was not considered in tuning the simulation geometry, but it was found that improvements were needed to reflect the coincidence summing when construction the virtual spectrum in the future. The determined simulation geometry was applied to generate theoretical gamma-ray energy spectra of representative artificial radionuclides. In order to create a virtual spectrum similar to the real one, the background spectrum was measured for each detector without a source, and the simulation results were calculated in the form of having the same energy channel as the background spectrum. The background spectrum and theoretical spectra of artificial radionuclides for each detector were databased so that virtual spectra could be generated under desired conditions. The virtual spectrum was generated by adding a background spectrum and a spectrum obtained by multiplying the spectrum of the desired nuclide by the concentration of the nuclide. The validity of generated virtual spectra was verified using the pre-developed gamma spectrometry program. As a results of gamma spectrometry of virtual spectra, the virtual spectra was verified by showing a difference within 20% from the radioactivity value input when generating the virtual spectra.

본 연구는 가상 시뮬레이션기반 노인간호 실습교육 실시 후 간호대학생의 몰입경험과 학습역량 이 학습만족도에 미치는 영향을 파악하기 위한 조사연구이다. 연구 대상자는 간호대학 학생 72명을 대상으 로 하였고, 자료수집은 2021년 4월 2일부터 5월 7일까지 온라인 설문을 통해 수행하였다. 자료분석은 SPSS/WIN 24.0을 이용하여 기술통계, 상관관계 및 다중회귀분석을 사용하였다. 연구결과, 가상 시뮬레이 션 교육 후 간호대학생의 학습만족도는 몰입경험(r=.656, p<.001), 학습역량(r=.672, p<.001)과 유의한 정 적 상관관계를 보였다. 학습만족도에 가장 영향력이 있는 요인은 학습역량(β=.459, p<.001), 몰입경험(β =.413, p<.001)으로 나타났으며 모형의 설명력은 60.9%이었다. 그러므로 가상 시뮬레이션 교육 후 학습만 족도를 향상시키기 위해서 실습에 대한 몰입을 촉진하고 개개인의 학습역량을 향상시킬 수 있는 방안들을 개발할 것을 제언한다.

PURPOSES : This study aimed to develop data conversion of NGII HD maps to OpenDRIVE format for virtual road implementation for autonomous-driving verification. METHODS : A method of defining the reference line of OpenDRIVE on the centerline of an NGII HD map is proposed. According to the construction characteristics of the NGII HD map, the optimal conversion method through parametric cubic polynomials was used in the form of piecewise and clamped cubic polynomials. RESULTS : The study focused on curved roads that may cause problems when converting HD map data into OpenDRIVE formats. As a result of data conversion, a reference line was defined to precisely follow the alignment of NGII HD maps drawn based on MMS data, and a lively virtual road was reproduced through road lane width and lane expression. CONCLUSIONS : A virtual road in the same environment as a real road, which is one of the important factors in verifying autonomous driving technology through virtual driving simulation, was constructed. The piecewise-polynomial normal was 0.008 m on average, and as a result of calculating the distance between the endpoint coordinates of the road object and the endpoint coordinates of the converted road object on the NGII HD map, the difference between the two points was 0.163 m on average. The clamped cubic polynomials normal was observed to be an average of 0.170 m.

Purpose: This study aims to describe the experience of nursing students who used a virtual simulation program for their nursing practicum. Method: Structured debriefing papers were collected from 65 senior nursing students using a convenient sampling method for this qualitative study. Conventional content analysis method was used for data analysis. Results: The study’s findings derived three theme clusters. The theme clusters were “satisfied by leading role in nursing practice and repetitive training,” “gained nursing responsibility and confidence in applying the learning into clinical practice,” and “recognized the limitations of customized nursing care.” Conclusion: The results of this study provided insight into nursing students' virtual simulation-based practical training experiences in the context of the Coronavirus disease-19 (COVID-19) pandemic.

Purpose: This study was conducted to explore Virtual Reality (VR) utilization strategies in scenario-based nursing simulation training. Method: This was an integrative review for the identification of scenario-based VR simulation training applied to nursing undergraduates. The existing literature was searched in electronic databases using RISS, PubMed, and Pro-Quest and the key words were “Scenario based,” “Simulation,” “Virtual reality,” “Virtual training,” and “Nursing.” Finally, five studies were analyzed. Results: All the studies were conducted from 2016 to 2019. One RCT, two quasi-experimental studies, and two mixed method studies were identified. The topics of the scenarios were all different; acute myocardial infarction, management of respiratory system disease with hypoxia, postoperative nursing with appendicitis, teamwork and communication in outpatient and emergency situations, and disaster situation training . The outcome variables that were significant statistically were performance, self-confidence, and learning satisfaction. Conclusion: The findings suggest that virtual simulation in nursing education can potentially improve knowledge, performance, and learning confidence and can increase satisfaction with learning experience among nursing undergraduates. Multidisciplinary cooperation and investment are needed to develop diverse content applying VR in nursing simulation education. The review of the side effects also needs to be performed.

Purpose: The purpose of this study was to explore the use of virtual simulations to improve knowledge, performance, self-efficacy, satisfaction and confidence of nursing students. Method: This study used a quasi-experimental design with 34 nursing students in one university. All the participants were forth grade students and received education on topics related to medical-surgical nursing. The experimental group participated in virtual and high-fidelity simulations. The control group participated in high-fidelity simulation. Collected data were analyzed using Chi-square, t-test and independent t-test using the WIN SPSS 23.0 program. Results: The experimental group who had participated in the virtual simulation education indicated significantly higher performance scores (t=-6.166, p=<.000) and confidence levels (t=-2.284, p=.031) as compared to the control group who had participated in traditional high-fidelity education for acute heart disease patients, However, the differences in knowledge (t=-.808, p=.425), education satisfaction (t=-.425, p=.653), and self-efficacy (t=-1.592, p=.121) were not significant differences. Conclusion: The results indicate that virtual simulation education is an effective learning method to improve nursing performance and confidence. Further study is needed to identify the effects of various clinical situations of virtual simulation-based care.

In this study, we used the 3D simulation program to create bodice patterns for adolescents boy students and analyze the fitting and air gap through 3D simulation. The purpose of this study was to select the bodice pattern method that best suited the body shapes of the adolescents male students. The subjects of this study were the French E pattern, Japanese N pattern, and Korean industrial L and J patterns. The applied size was the sixth Korean human body size survey data of 2010 Korea. The age range of the subjects was 13-18 years. DC Suite Program Ver. 5.1 was used, and SPSS 23.0 program was used for data analysis. As a result of comparing the shapes of the bodice patterns in the 3D simulation program, the E pattern had two waist darts on the front and one shoulder dart and one waist dart on the back, and the J and L patterns only had one dart on the back. The N pattern had no darts on either the front or back. As a result of examining the appearance evaluation of the pattern, air gap, color distribution, and clothing cross-section, the E pattern was evaluated as the closest to the body, and the N pattern was evaluated as the pattern with the largest allowance. The J pattern was evaluated as the best fit for body shape of the male adolescents. However, it is necessary to develop a pattern system by adding extra ease in setting the center front length.

Virtual reality is one of the most popular technologies in the fourth industrial revolution. We suggest that virtual training using virtual reality would be more effective than existing training. Development of virtual trolley simulation content was done through Unreal Engine. Through the production of virtual reality content, we had developed a more advanced simulation development environment.

Using 3D based BIM(Building Information Modeling) enables a variety of construction simulations. The is no case to simulate BIM demonstration experiment on deeply immersed virtual reality environment in korea. This paper develops a multi screen based simulation system to enable 3D based immersed environment to diverse decision making and virtual construction simulation. In a developed simulation laboratory, we can carry out BIM drawing review, disaster evacuation simulation, constructability review on wild land and design urban planning using haptic device on 3-side space with 4K resolution . Also, It can review large amount of drawings without data conversion because of compatibility with BIM software.

BIM(building information modeling) has been actively applied to construction industries and to maximize its application through the life cycle of structure, various relevant technologies have been proposed. In particular, 4D sequencing management and 5D cost-related management were introduced as an improved version of the design review and interface control by 3D information design. On the other hand, the virtual construction using virtual construction equipment can sophisticatedly handle capacity, dynamic movement, collision boundaries of actual construction machines but it still stays at a low level in a technical sense. In this study, simulation systems based on BIM involving virtual construction equipment have been developed; then it is applied to the actual construction project to evaluate the safety and efficiency of construction equipments. It was confirmed that the simulation systems can be utilized to construct virtual construction site by using an effective 3D library of construction equipment and can plays a key role to secure construction safety and economic feasibility. Specifically, the simulation system are very useful for decision making by construction managers to select the optimum equipment and construction method with a better understanding for safety and cost-saving.

Recently, Live-Virtual-Constructive (L-V-C) integrate training system has proposed as a solution for the problems such as limitation of training areas, increase of mission complexity, rise in oil prices. In order to integrate each training system into the one effectively, we should solve the issue about stress of pilots by the environmental differences between Live and Virtual simulation which could be occurred when each system is connected together. Although it was already examined in previous study that the psychological effects on pilots was occurred by the environmental differences between actual and simulated flights, the study did not include what the causal factors affecting psychological effects are. The aim of this study is to examine which environmental factors that cause pilots’ psychological effects. This study analyzed the biochemical stress hormone, cortisol to measure the pilots’ psychological effects and cortisol was measured using Enzyme-linked immunoassay (EIA). A total of 40 pilots participated in the experiment to compare the differences in pilots’ cortisol response among live simulation, virtual simulation, and the virtual simulation applying three environmental factors (gravity force, noise, and equipment) respectively. As a result, there were significant differences in cortisol level when applied the gravity force and equipment factors to the virtual simulation, while there was no significant difference in the case of the noise factor. The results from this study can be used as a basis for the future research on how to make L-V system by providing minimum linkage errors and design the virtual simulator that can reduce the differences in the pilots’ psychological effects.

The purpose of this study was to develop slacks patterns for obese-schoolgirls aged 10~12 by using a 3D virtual garment simulation system. The criteria for subjects in this study were girls who had a BMI of over 25kg/m2. A total of 155 schoolgirls who met these criteria were enrolled. The results were as follows: First, by using 3D virtual garment simulation, a new slacks pattern considerate of obese-schoolgirls was developed. The basic numerical formulae were as follows: Front and back hip girth of H/4－0.5+1 and H/4+0.5+1.5, front waist girth of W/4+1+0.5, back waist girth of W/4+2+0.5, front crotch extension of H/16－0.5, back crotch extension of H/8－0.5, front dart amount of 1, and back dart amount of 2. Second, according to the new slacks pattern appearance evaluation, the new slacks pattern scored more highly than the existing pattern for silhouette and ease amount, confirming that the new slacks pattern is appropriate for obese-schoolgirls. Additionally, the new slacks pattern was evaluated allowing for the proper space length of the waist, abdomen and hips. This study is expected to serve as important basic data for ensuing studies that may utilize a 3D virtual garment simulation system with 2D patterns and for future 3D pattern production program development.