In this study, graphene oxide (GO) was synthesized by the improved Hummers’ method. The degree of oxidation from graphite (Gi) to GO was determined through interlayer spacing calculated from X–ray diffraction. Besides, the effect of KMnO4: Gi ratios (X1), H2SO4 volume (X2), oxidation temperature (X3), oxidation time of stage 1 (X4), and oxidation time of stage 2 (X5) was screened by the Plackett–Burman model. The simultaneous impact of three factors that influenced the degree of oxidation (X1, X2, and X3) was studied by the Box–Behnken experimental model of response surface methodology to achieve suitable conditions for the GO synthesis process. The characterization of GO product was investigated via the modern analytical methods: X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, UV–Vis spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. Inaddition, the study was also carried out on a pilot scale for orientation in industrial application with the yield of 14 g/batch.

This work describes the facile synthesis of silver nanoparticle-decorated zinc oxide nanocomposite through a simple glycol reduction method. The silver nanoparticle-decorated zinc oxide nanocomposite-based pencil graphite electrode has been validated as a perceptive electrochemical sensing podium towards nitrite. The morphology of the prepared nanocomposite has been characterized via specific spectroscopic and electrochemical techniques. The sensor exhibits a notable enhancement in the cyclic voltammetric response to nitrite oxidation at an ideal peak potential of 0.76 V in pH 6.0 acetate buffer. Under optimum conditions of nitrite directly expanded with their concentration in the range from 30 to 1400 μM with a detection limit of 14 μM.

Thermal reduction of graphite oxide (GO) is considered as a prospective method for the preparation of high-performance graphene-based materials. However, this method has certain limitations, and the major is that this exothermic process is difficult to control. In this research, we focused on the kinetic studies of the reduction of graphite oxide using non-isothermal differential calorimetry (DSC) method. Six GO nanocomposites with dyes were tested to study the shift in kinetic parameters. The apparent reaction order is determined to be ca 0.7 for the thermal decomposition of pure GO, while in the presence of dye molecules it increases sometimes reaching a value of 2.0 for higher dye concentrations. Decisively, the thermal decomposition of pure GO can be presented as an intermediate between a zero- and first-order reaction, while the introduction of dye molecules turns a certain part of the energy consumption via the bimolecular pathway. Our research revealed that the process of GO thermal decomposition can be operated and properties of the final product (reduced graphene oxide (rGO) and its derivatives) can be adjusted more precisely using additive molecules, which interact with GO sheets.

Zinc-ion Batteris (ZIBs) are recently being considered as energy storage devices due to their high specific capacity and high safety, and the abundance of zinc sources. Especially, ZIBs can overcome the drawbacks of conventional lithium ion batteris (LIBs), such as cost and safety issues. However, in spite of their advantages, the cathode materials under development are required to improve performance of ZIBs, because the capacity and cycling stability of ZIBs are mainly influenced by the cathode materials. To design optimized cathode materials for high performance ZIBs, a novel manganese oxide (MnO2) coated graphite sheet is suggested herein with improved zinc-ion diffusion capability thanks to the uniformly decorated MnO2 on the graphite sheet surface. Especially, to optimize MnO2 on the graphite sheet surface, amounts of percursors are regulated. The optimized MnO2 coated graphite sheet shows a superior zinc-ion diffusion ability and good electrochemical performance, including high specific capacity of 330.8 mAh g−1 at current density of 0.1 A g−1, high-rate performance with 109.4 mAh g−1 at a current density of 2.0 A g−1, and remarkable cycling stability (82.2 % after 200 cycles at a current density of 1.0 A g−1). The excellent electrochemical performance is due to the uniformly decorated MnO2 on the graphite sheet surface, which leads to excellent zinc-ion diffusion ability. Thus, our study can provide a promising strategy for high performance next-generation ZIBs in the near future.

Graphite oxide (GO) was produced using the modified Hummer's method. Poly(p-phenylene sulfide) (PPS)/reduced graphite oxide (RGO) composites were prepared by in situ polymerization method. The electrical conductivity of the PPS/RGO composites was no more than 82 S/m. It was found that as GO content increased in the PPS/RGO composites, the crystallization temperature and electrical conductivity of the composites increased and the percolation threshold value was at 5-8 wt% of GO content.

Poly(vinyl alcohol) (PVA) composites with various graphite oxide (GO) contents (0 to 10 wt%) were prepared by sonicating the mixture of PVA and GO, followed by crosslinking with glutaraldehyde. GO was pre-treated with oxyfluorination (O2:F2 = 8:2) in order to modify the surface of GO to allow it to carry hydrophilic functional groups. PVA/GO composite hydrogels were characterized by scanning electron microscopy and Fourier-transform infrared spectrometer (FT-IR). The morphology of the PVA/GO composite hydrogels and the variations in soluble gel portion were investigated under various GO contents and UV irradiation doses. The variation in the chemical structure of photo degraded PVA/GO composite hydrogels was studied by FT-IR. The photochemical stability of PVA/GO composite hydrogels under UV irradiation was found to improve noticeably with increasing content of uniformly dispersed GO.