Heavy bitumen scattered in the underground sedimentary layer is a kind of unconventional energy source, and by extracting it, a production well is excavated in the sedimentary layer and high-temperature and high-pressure steam is injected to reduce the viscosity of bitumen and recover it to the ground steam assisted method is applied. As a recovery method that uses the steam effect of the dilution effect of solvent injection, it is a recovery method that can increase thermal efficiency. In this study, the process system of the central processing facility(CPF) of the hybrid steam-solvent recovery method that injects solvent into the existing steam assisted method was analyzed, and the core facilities for each process were identified, and hybrid steam-solvent recovery compared to the existing steam assisted method. In the case of the method, it was evaluated that the amount of steam supply and all utility costs decreased according to the solvent injection.

In this present investigation, machinability studies on novel aluminum composite with hybrid reinforcements of copper-coated 4% carbon fibers (CFs) and 3% nanoclay in AA6026 matrix fabricated by compocasting method is performed. Step drill bit and multifaceted drill bit are used by adopting central composite design (CCD) in response surface methodology (RSM). The outcomes show that, with a rise in rotational speed surface irregularities, resultant force and material removal rate (MRR) intensifies, and with the additional rise in rotational speed, all the outputs decrease considerably. High MRR, resultant cutting force, and surface roughness are obtained with multifaceted carbide drills, compared with a step drill. Desirability function is used to maximize the MRR and minimize the resultant cutting forces considering the constant surface roughness of 3 μm. The optimal values are rotational speed of 1285 rpm, feed rate of 60 mm/min with the step drill bit, producing an MRR of 0.0439 kg/sec and a resultant cutting force of 185.818 N. The second-order empirical models are developed for outputs, which are fed into the non-traditional metaheuristic Evaporation Rate-based Water Cycle Algorithm (ER-WCA) therefore the lower objective value is achieved with step drill of 51.7421. It is found that using a step drill the machinability performance of this hybrid nanocomposite is well improved than the machining with other drill bits. This composite fulfills the norms of 2000/53/CE-ELV European environmental directives.

In this study, In order to apply the U-flanged truss hybrid beam to the actual construction site, the structural design of the basic module of the middle and low-rise neighborhood living facilities was performed according to the Korea Design Standard, and the construction cost and construction period were compared with the traditional reinforced concrete structure system. As a result of analyzing the construction cost for the basic module, if the U-flanged truss hybrid beam and D-Deck slab system are used, the construction cost can be reduced by 86% compared to the traditional reinforced concrete structure system. In addition, as a result of analyzing the construction period for a floor area of 1,000m2, using the U-flanged truss hybrid beam and D-Deck slab system can save 2.0days in construction period compared to the traditional reinforced concrete structure system. Therefore, the U-flange truss hybrid beam can secure sufficient economic feasibility compared to the existing reinforced concrete method in terms of cost reduction and shortening of construction period.

Purpose: The purpose of this study was to clarify the definition of ‘death attitude’ reflecting the passage of time and socio-cultural context through conceptual analysis . Method: The concept of ‘death attitude’ was analyzed using a hybrid model to clarify the concept's properties and definition. For theoretical analysis, literature published from 2016 to 2021 was searched and a total of 33 articles including 25 domestic and 8 foreign studies were analysed. For a field study, seven adults were interviewed in May-June, 2021. Result: The domain of ‘death attitude’ concept were deduced into positive, neutral, and negative domains. At the field research stage, 'how to relieve the burden on those left behind' under the 'escape' attribute, 'no time to think about death' under the 'avoidance' attribute, and 'anxiety about unexpected death' under the 'anxiety' attribute were newly discovered. Conclusions: ‘Death attitude’ is a positive, neutral, or negative attitude toward death according to multuple characteristics such as demographics, spiritual well-being, direct or indirect experiences of death, or death-related educational experiences. Death attitude affects quality of life, meaning of life, and end-of-life care. It is important for nurses to be aware of their own death attitudes in order to provide quality end-of-life care to patients and their families.

This study aimed to determine the trend in dry matter yield (DMY) of a new sorghum-sudangrass hybrid (SSH) in the central inland regions of Korea. The metadata (n=388) were collected from various reports of the experiments examining the adaptability of this new variety conducted by the Rural Development Administration (1988–2013). To determine the trend, the parameters of autoregressive (AR) and moving average (MA) were estimated from correlogram of Autocorrelation function (ACF) and partial ACF (PACF) using time series modeling. The results showed that the trend increased slightly year by year. Furthermore, ARIMA (1, 1, 0) was found to be the optimal model to describe the historical trend. This means that the trend in the DMY of the SSH was associated with changes over the past two years but not with changes from three years ago. Although climatic variables, such as temperature, precipitation, and sunshine were also considered as environmental factors for the annual trends, no clear association was observed between DMY and climates. Therefore, more precise processing and detailed definition of climate considering specific growth stages are required to validate this association. In particular, research on the impact of heavy rainfall and typhoons, which are expected to cause damage in the short term, on DMY trends is ongoing, and the model confirmed in this study is expected to play an important role in studying this aspect. Furthermore, we plan to add the environmental factors such as soil and cultivation management as well as climate to our future studies.

농촌진흥청 국립원예특작과학원에서 육성된 formolongi-Asiatic(FA)종간잡종 나리 ‘Bonanza’, ‘Coral Candy’, ‘Purple Crystal’의 특성검정 및 FISH 분석을 통한 염색체 검경을 수행하였다. ‘Bonanza’, ‘Coral Candy’, ‘Purple Crystal’의 개화시기는 6월 중하순, 중순, 상순으로 각각 중만생종, 중생종, 조생종에 해당한다. 개화방향은 3품종 모두 상향이며 약간의 향기를 가지고 있다. 절화장은 101.0cm(‘Purple Crystal’)에서부터 142.3cm(‘Bonanza’)로 초장 신장성이 우수하여 절화로서의 개발이 가능하다. 화폭은 ‘Bonanza’와 ‘Coral Candy’가 17,1cm, 16.9cm로 관찰되어 대형화로 분류되며 ‘Purple Crystal’은 12.3cm으로 좁으나 화폭이 4cm 이상으로 화폭이 안정적이다. 잎의 길이는 ‘Bonanza’는 15.7cm, ‘Coral Candy’는 19.7cm, ‘Purple Crystal’은 11.1cm로 관찰되었다. 염색체 분석 결과, 3품종 모두 3배체(2n=3x=36)로 관찰되었다. FISH 분석 결과, ‘Bonanza’, ‘Coral Candy’, ‘Purple Crystal’의 5S/45S rDNA가 각각 4/11 loci, 4/12 loci, 4/11 loci로 관찰되었다. 3번 염색체를 제외하고 나머지 염색체에서 관찰되는 rDNA의 패턴이 달라 FISH 분석에 대한 결과는 품종을 구별하는 마커로 유용하게 이용 될 수 있을 것으로 기대할 수 있다.

In this study, various physical cleaning methods such as physical washing and osmotic backwash, were performed to understand membrane fouling characteristics by employing real secondary wastewater effluent (SWWE). In addition, microfiltration (MF) and ultrafiltration (UF) pretreatments were compared to maximize removal of organic matter and to control membrane fouling efficiently. Organic foulants deposited on the active layer of FO membrane were observed by fouling behavior test. The relationship between concentrations of natural organic matter and membrane fouling was also investigated from the bench-scale FO tests. Finally, by quantitative analysis of correlations between foulants and fouling reversibility with the modified fouling index (MFI), we identified the applicability of MFI in predicting FO intake water fouling potential.

To overcome recent emission regulation, various hybrid systems are being developed. In the E-4WD(electric four wheel drive) system, the engine and transmission drive the front wheel, electric motor and single reduction gear drive the rear wheel. As the gear ratio of the reduction gear set determines the electric motor's operating point, the gear ratio is important to enhancement efficiency of hybrid system. This study is to analyze motor reduction gear ratio's influence on E-4WD hybrid system for optimized efficiency and driving performance. Fuel economy, operating point of power source and hybrid mode are analyzed using simulation developed with dynamic programming method.

Because of environmental pollution and lack of resources, necessity of energy efficiency improvement and reduction of exhaust gas emission and CO2 have grown in importance. Therefore a lot of studies are conducted for HEV(hybrid electric vehicle) and PHEV(plug-in hybrid electric vehicle). In addition, automobile companies are researching and manufacturing HEV and PHEV. Due to cost and time problem, simulation is preferred than experimental test to find better component size for efficiency improvement. In this research, backward simulation program is developed base on Dynamic Programming. Using this simulation program, fuel economy sensitivities for each parameter are analyzed and compared. Fuel economy is measured for a combined cycle that is calculated from FTP-75 and HWFET cycle. The target parameters are front/rear power train efficiency, drag coefficient, vehicle mass, rolling resistance coefficient, tire radius, center of gravity. The most sensitive parameter is front power train efficiency and second is drag coefficient. Rear power train efficiency, vehicle mass, rolling resistance coefficient are third, forth and fifth. By comparing sensitivities, we can choose a better way to improve fuel economy of HEV.

Agaricus bitorquis is an edible white mushroom of the genus that is cultivated at high temperature(25±1oC) unlikeA. bisporus is cultivate at 16±2oC. Unlike Agaricus bisporus, an edible white A. bitorquis mushroom is cultivated at hightemperature (25±1oC). Most farmers cultivate this mushroom for a long cultivation period in Korea. For this reason, we madeheterokayons to develop a new cultivar that generate fruitbodies for short cultivation period. Over one hundred SSIs(singlespores isolates) were collected from selected A. bitorquis ASI1151 and ASI1349 strains. Seventy-three SSIs were germinated onCDA(compost dextrose agar) media after 20 days (minimum) or 83 days (maximum) incubation under different mediacondition. The mycelial growth rate of germinated SSIs was different. 9 homokaryons in ASI 1151 and 11 homokaryons in ASI1349 from SSIs were selected by OPN-02 primer in RAPD analaysis. Also this primer was used to select heterokaryon thatcross among each homokaryon with compatible locus. Therefore 44 compatible matings were confirmed of 99 crossed lines.

The major complaint of hybrid vehicle driver is that real fuel economy is lower than the certified fuel economy. Therefore, it is important to analyze the cause of low fuel economy and to improve the fuel consumption at real driving condition. In this study, the various speed profile is measured by driving urban road with considering different traffic jam. By using backward simulation, the fuel economy characteristics of the acquired driving modes are analyzed. From the simulation results, the operating points of engine and motor analyzed and the cause of decrease of real fuel economy is examined.

This study is a duralumin and applying heat to the STS-wide measurement range is used, the surface temperature by using the temperature of studying the non-destructive testing of a new paradigm to estimate the position and size of a structure defect purpose. STS and duralumin which has a structure defect is applied a heat by a heater. Its difference of STS and duralumin surface temperature is measured using IR thermography. The estimated result of the STS and duralumin experiment and that of theoretical analysis of PDE are compared and analyzed to diagnose the STS and duralumin defect. Moreover, this study can save time and money and improve accuracy contrast to the existing ultrasonic NDE experiment. In addition, the new paradigm of NDT/NDE by reverse-engineering is going to be valid if the data of thermal analysis and temperature distribution from the specifications of many materials is accumulated and verified. In this study, the average surface temperature of the STS in the same heating condition was 4.53 ° K higher than that of duralumin and both of the surface temperature showed an inflection point in the defect 2.5mm.The maximum surface temperature difference was formed on the 2.5mm, and the study proves its reliability because the average surface temperature of the STS and duralumin was 0.74°K, 0.45°K higher than the theoretical surface temperature.

PURPOSES : In this study, an image analysis method is used to evaluate the pore structure characteristics and permeability of hybrid concrete. METHODS: The binder weight of hybrid concrete is set to 400 kg/m3, 370kg/m3, and 350 kg/m3, and for each value of binder weight, the pore structure and permeability of concrete mixture is evaluated. The permeability of hybrid concrete is evaluated using a rapid chloride penetration test(RCPT). RESULTS : The concrete pore structure characteristics of hybrid concrete reveals that as the binder weight is reduced, the entrained air is reduced and the entrapped air is increased. The permeability of the hybrid concrete for all values was measured to be below 1000 C, which indicates a "Very Low" level of permeability relative to the evaluation standard of KS F 2711. Additionally, as the binder weight is decreased, there is a significant increase in the permeability of chloride ions. CONCLUSIONS : In this study, the pore structure characteristics of hybrid concrete at different binder weights shows that as the binder weight is reduced, the entrained air is reduced and the entrapped air is increased. Consequently, chloride ion penetration resistance of the hybrid concrete is diminished. As a result, it is expected that this will reduce the concrete’s durability.

The currently cultivated varieties of moth orchid flowers have weak or no fragrance and the plant requires high temperatures for cultivation. In order to develop a new variety of orchid that is psychrophilic and fragrant, intergeneric cross between wild wind orchids and moth orchids was performed. In 2009, To obtain intergeneric hybrids from Sedirea japonicum and Neofinetia falcata with moth orchids, artificial crosses with a total of 160 combinations were performed. Most of the cross combinations failed due to crossincompatibility after intergeneric crosses, with no pod formation, premature pod dropping after pod formation, and pod formation that did not produce seeds. From among these, the crosses that formed normal seeds and germinated to produce viable plants included Doritis pulcherrima × S. japonicum, N. falcata × D. pulcherrima, and N. falcata × P. equestris. From the hybrid specimens obtained through these crosses, 2 superior lines (819-3B and K9256) were selected based on their floral morphology, number of flowers, hardiness, and fragrance. Comparative analyses of the morphological and chromosomal traits were performed between the selected hybrid specimens and their parents. The flower and inflorescence characteristics of the selected hybrids exhibited intermediary traits of both the parents; however, more traits from the moth orchids were inherited. For pollinia traits, both 819-3B and K9256 specimens exhibited intermediate forms of their parents in terms of their shape and size. In the case of 819-3B specimen, a high degree of trait similarity with that of D. pulcherrima was observed; whereas, K9256 specimen showed lobes similar to that of P. equestris. The ploidy of moth orchid, S. japonicum, and N. falcata used for crosses was diploid, as determined by microscopic examination and ploidy analysis. The microscopic examination of chromosomes from the intergeneric hybrid pollens revealed mutation of the chromosome count among different specimens as well as irregular chromosome separation. For the production of next-generation progeny using the obtained hybrids, back-cross was performed; however, most of the progeny obtained were sterile and, among the 12 back-crosses, pod formation was noted in S. japonicum × 819-3B and 819-3B × S. japonicum crosses only.

In this study a hybrid system consisting of steel and carbon fiber reinforced polymer (CFRP) is considered. While CFRP is selected for impact energy reflection due to its high strength, steel is selected for impact energy absorption due to its high ductility. A numerical model considering the elastoplastic behavior of steel is formulated to simulate the dynamic responses of the hybrid system subject to an impact load. A hybrid roadside guard rail system of steel rail and CFRP post is proposed and analyzed with a case study. The numerical model for the hybrid roadside guard rail system is used to find optimized design of the proposed hybrid system for future study.

This study aimed to analyze the expression of Hybrid in Contemporary Hair Design that is one kind of total fashion. In this research, by background of the hybrid characteristics of the messes culture art, the hybrid characteristics of the hair design has been defined as characters which is the mixture of timeless spaces, styles, sexes, unsuitable elements and cultures. The results of analysis by the expression of the hybrid hair design after 2000 is like this. As the researching, the hybrid characteristics of the hair design by the mixture of unsuitable elements and styles have been presented the highest. The result of the frequency of the apparition in the hair design molding elements according to the expression of the hybrid hair design, the hybrid characteristics of the unsuitable elements and style has been presented ideological form and the artificial form was the highest. The case of the hybrid of the activated texture, the unsuitable elements, style and timeless space has been presented excellently one after another. In the color tone, the mixture of the style, the unsuitable elements and timeless space has been presented one by one. The case of the hybrid of the image, the unsuitable elements that is the highest the frequency of the apparition was presented the image of the avant-garde, the fantastic and humor one after another.