As the decommissioning and decontamination (D&D) of nuclear power plants (NPPs) has actively proceeded worldwide, the management of radiation exposure of workers has become more critical. Radioactive aerosol is one of the main causes of worker exposure, contributing to internal exposure by inhalation. It occurs in the process of cutting radioactive metal structures or melting radioactive wastes during D&D, and its distribution varies according to decommissioning strategies and cutting methods. Among the dominant radionuclides in radioactive aerosols, Fe-55 is known to be the most abundant. Fe-55, which decays by electron capture, is classified as a difficult-to-measure (DTM) radionuclide because its emitted X-rays have too low energy to measure directly from outside of the container. Generally, for measuring DTM nuclides, the liquid scintillation counting (LSC) method and the scaling factor (SF) method are used. However, these methods are not suitable for continuous monitoring of the D&D workplace due to the necessity of sampling and additional analysis. The radiation measurement system that can directly measure the radionuclides collected at the aerosol filter could be more useful. In this study, as preliminary research on developing the radioactive aerosol monitoring system, we fabricated a gamma-ray spectrometer based on a NaI (Tl) scintillator and measured the energy spectrum of Fe-55. A beryllium window was applied to the scintillator for X-ray transmission, and the Fe-55 check source was directly attached to the scintillator assuming that the aerosol filter was equipped. 5.9 keV photopeak was clearly observed and the energy resolution was estimated as 44.10%. Also, the simultaneous measurement with Cs-137 was carried out and all the peaks were measured.

방사능 오염도 측정에 사용하기 위한 이중구조 고분자막이 폴리설폰과 세륨활성화된 이트륨실리케이트(CAYS)를 이용하여 제조되었다. 제조된 막은 순수 고밀도 고분자 지지층과 이에 제막된 고분자 용액의 상전환 공정에 의해 고형화된 CAYS 함침 활성층의 이중구조로 구성된다. 제막공정에서 대기방치 공정이 생략되었을 때 CAYS를 포함하는 활성층은 전형적인 비대칭 구조를 지니며, CAYS 입자들이 고분자 구조 사이에 박혀있는 형상을 지닌다. 제막공정에서 대기에 방치하는 시간이 증가할수록 막의 형상은 스폰지 구조를 띠며 CAYS는 고분자 구조로부터 분리되어 막 내부에 셀 같은 공간에 밀집되어 존재함을 보였다. 한편, 두 충 사의 계면형상은 고분자 고형화 과정에서의 상전환 속도와 밀접한 관련되었으며, 대기방치 시간의 증가에 따라 계면의 구분이 뚜렷하게 나타나지 않았다. 방사능 탐지 특성에서 스폰지 구조를 지니는 막의 고분자 구조는 방사성핵종이 통과할 수 없는 밀집된 형상을 지니면서 탐지효율의 감소를 초래하는 것으로 나타났다.