We have improved the control and driving system of 16' reflector at Kwanak Observatory at Seoul National University, by completing encoder unit, and by developing programs for correction of errors resulting from hardware defects. The hardware defects of this telescope system are the large backlash and the nonuniform tracking and pointing. The telescope pointing accuracy for RA is improved to a few arc minutes, and that for DEC is several tens of arc minutes. The guiding error is improved to 0.7 arcsec/minute, allowing up to 3 minutes exposure for CCD imaging under typical seeing conditions at the Observatory.

As the Photovoltaic system market increases, various technologies are emerging to improve system operation efficiency. Such additional systems of the power generation system are generally referred to as ‘Balance of System’, for example a panel cooling, a panel cleaning and a panel angle adjusting apparatus. In this paper, we discuss an algorithm to calculate the target temperature of cooling in response to changes in the installation environment conditions of the power generation system so that the efficiency improvement rate target set by the user can be achieved with respect to the control method of the cooling water injection system among various panel cooling apparatuses. In order to calculate the target temperature of cooling, the output enhancement coefficient is calculated experimentally based on the temperature change according to the solar radiation condition of the PV panel, and the required reduction temperature of each irradiation condition is calculated considering the efficiency improvement rate. In addition, the efficiency improvement ratio is calculated considering the installation condition of the general power generation system without a separate control group. The thermal performance coefficient of the PV panel test body for calculating the expected temperature of the PV panel is calculated experimentally. The target temperature of cooling is calculated as the sum of the expected temperature of the PV panel and the required reduction temperature, and the injection system that tracks the target temperature by cooling water injection is constructed and compared with the power generation improvement rate and the user setting efficiency improvement rate.

침전지는 수처리 공정에서 중요한 조작 중 하나이며, 침전지내에서는 응집과 침전이 일어남에 따라 입자의 크기분포가 변하는 복잡한 현상이 발생한다. 따라서 침전지의 효율적인 설계나 운영을 위해서는 이러한 현상에 대해 이해해야만 하며, 침전효율의 극대화를 위한 연구가 필요하다. 본 연구에서는 침전지내의 흐름을 모의하기 위하여 범용 CFD 프로그램인 FLUENT를 이용하였으며, 침전효율을 평가하기 위하여 FLUENT에서 제공되는 입자추적기법을 사용하였다. 또한