논문 상세보기
pp.1174-1179
Deicing agent refers to the substance that melts snow by exothermic or endothermic chemical reaction after spraying on snow. It also has the function of reducing the freezing point to prevent freezing. However, the long-term use of deicing agent can cause some negative problems, such as pot hole, concrete corrosion, vehicle and steel bridge parts corrosion. At present, wet salt spray deicing is a cost-effective deicing method that is being widely used. Typical deicing agents are calcium chloride and sodium chloride. Deicing equipment is placed to similar or higher corrosive environment than coastal or marine environment due to direct contact to chloride in deicing operation. Therefore, the anti-corrosion control is very important for the maintenance of deicing equipment. In this study, corrosion resistance, blistering and repairability of the deicing equipment were tested by using test standard (salt water production and spraying- KS D 9502 , evaluating degree of rusting- ASTM D 610, evaluating degree of blistering- ASTM D 714, pull-off strangth of coatings- ASTM D 4541). And an economical coating system with long-term antirust performance was constructed. The results show that the performance of the coating system has been improved than with the original coating.
1. 서 론
1.1 연구배경
1.2 습염식 염화물살포기와 부식
1.3 도장에 의한 방식
1.4 도장계 설계
2. 시험 및 고찰
2.1 시험장비 및 방법
2.2 시험결과 및 고찰
3. 결 론
References
