간행물
한국산업경영시스템학회지 KCI 등재 Journal of Society of Korea Industrial and Systems Engineering
- 발행기관 한국산업경영시스템학회
- 자료유형 학술지
- 간기 계간
- ISSN 2005-0461 (Print)2287-7975 (Online)
- 수록기간 1978 ~ 2024
- 주제분류 공학 > 산업공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
Vol. 46 No. 3 (2023년 9월) 29건
21.
2023.09
구독 인증기관 무료, 개인회원 유료
Under increased complexity and uncertainty of overseas construction projects, it is important for construction companies to improve their own project risk management capabilities instead of risk-taking strategies to secure competitiveness in the overseas construction market. Although most of the risks occur in project execution stage, many previous studies focused on planning stage including risk identification and analysis among PRM process. Therefore, this study aims to verify the effectiveness of whole PRM process during project execution stage through empirical study on participants of overseas construction projects. As the result it was found that first, the factor directly affects the project success is the execution process of PRM. It implies that appropriate actions such as appointing charged manager for risks, timely implementation of responding plan, continuous risk monitoring and updating established plan are the key for contribution to the project success. Second, the importance of communication in PRM is also found, which is not conducted at a specific but throughout the entire PRM process and need to be managed as essential factor for successful PRM..
4,000원
22.
2023.09
구독 인증기관 무료, 개인회원 유료
This empirical analysis investigates the impact of consultant competency and project manager (PM) competency on business performance. Two hundred and twenty four chief executive officers and executive members at small and medium sized firms in the manufacturing sector were surveyed, yielding several outcomes. First, consultant competency positively affects consulting performance. Second, consultant competency positively affects business performance. Third, PM competency does not have a significant influence on consulting performance. Fourth, PM competency does not have a significant impact on business performance. Fifth, consulting performance does not have a significant effect on business performance. Finally, regarding the mediation effect of consulting performance on the influence of consultant competency and PM competency on business performance, consulting performance had no significant impact. Thus, expertise and insight are crucial for a consulting business to enable the growth of professional consultants. Furthermore, this study is expected to enhance the consulting performance of small and medium sized manufacturing firms by providing useful data to consultants and project managers when carrying out consulting projects.
4,000원
23.
2023.09
구독 인증기관 무료, 개인회원 유료
Companies are paying attention to project governance to realize their goal strategies, project success, and project value in a rapid and complex environment due to the development of information technology. This study aims to explore project governance and factors from literature review and practice guides related to project governance and empirically analyze the impact of project governance factors on IT project objective performance. The survey was conducted on project managers, project team members, and project management members with experience in carrying out business IT projects within two years at companies in various industries in Korea. The main conclusion is as follows. Among the project governance factors, disclosure and reporting that uses and reports using appropriate and reliable information about projects related to decision-making activities positively impact the achievement of IT project objectives: business success and stakeholder satisfaction. Among the project governance factors, project sponsorship, a role that effectively connects management and projects, and a project management framework that provides tools, procedures, resources, and techniques for projects positively impact IT project objective performance. This study is of academic and practical significance in that it identifies the definition and factors of project governance through companies in various industries in Korea and the positive impact of project governance factors on IT project objective performance.
4,000원
24.
2023.09
구독 인증기관 무료, 개인회원 유료
This study (1) explored spatio-temporal population distribution patterns in Jeonju by using emerging hot spot analysis and (2) identified the influential factors to determine the spatio-temporal patterns by using multinomial logit model. The major findings are as follows. First, the results of emerging hot spot analysis indicated that the 100*100m grid in the urban area of Jeonju was found to have a category of hot spots, whereas most of the cold spot series was concentrated in the outskirts of the city. Also, new towns such as Jeonju Eco City, Jeonbuk Innovation City, and Hyocheon District were persistent or intensifying hot spots, Third, the results of multinomial logit model revealed that the factors influencing deterrmining the spatio-temporal patterns were accessibility to schools, hospitals, parks, and walfare services. This study offered a deeper understanding of urbanization and regional changes in Jeonju, and important information for urban planning.
4,000원
25.
2023.09
구독 인증기관 무료, 개인회원 유료
At a time when the demand for drones is increasing, a plan to utilize drone images was sought for efficient promotion of cadastral resurvey. To achieve the purpose of this study, the technical and legal status of drone images was reviewed, and through this, the possibility of using it for cadastral resurvey was primarily reviewed. subsequently, an experiment was conducted targeting the project district to examine whether drone images were applied to boundary extraction, which is the primary process of cadastral resurvey. As a result of the experiment, it was found that boundary extraction from images is possible. However, in some cases, it is impossible due to field conditions or image quality. Therefore, it is necessary first to apply cases where boundary extraction is possible to cadastral resurvey and seek solutions for some impossible cases. In particular, the image quality problem may have problems with the current technology, but it will also have problems with the existing drone equipment. So, standard for drone calibration should also be established. Finally, the cadastral resurvey surveying procedure using drones was also presented.
4,000원
26.
2023.09
구독 인증기관 무료, 개인회원 유료
Image mosaicking is one of the basic and important technologies in the field of application using images. The key of image mosaicking is to extract seamlines from a joint image. The method proposed in this paper for image mosaicking is as follows. The feature points of the images to be joined are extracted and the joining form between the two images is identified. A reference position for detection the seamlines were selected according to the joint form, and an image pyramid was created for efficient image processing. The outlines of the image including buildings and roads are extracted from the overlapping area with low resolution, and the seamlines are determined by considering the components of the outlines. Based on this, the seamlines in the high-resolution image was re-searched and finally the seamline for image mosaicking was determined. In addition, in order to minimize color distortion of the image with the determined seamline, a method of improving the quality of the mosaic image by fine correction of the mosaic area was applied. It was confirmed that the quality of the seamline extraction results applying the method proposed was reasonable.
4,000원
27.
2023.09
구독 인증기관 무료, 개인회원 유료
Land monitoring involves systematically understanding changes in land use, leveraging spatial information such as satellite imagery and aerial photographs. Recently, the integration of deep learning technologies, notably object detection and semantic segmentation, into land monitoring has spurred active research. This study developed a web service to facilitate such integrations, allowing users to analyze aerial and drone images using CNN models. The web service architecture comprises AI, WEB/WAS, and DB servers and employs three primary deep learning models: DeepLab V3, YOLO, and Rotated Mask R-CNN. Specifically, YOLO offers rapid detection capabilities, Rotated Mask R-CNN excels in detecting rotated objects, while DeepLab V3 provides pixel-wise image classification. The performance of these models fluctuates depending on the quantity and quality of the training data. Anticipated to be integrated into the LX Corporation's operational network and the Land-XI system, this service is expected to enhance the accuracy and efficiency of land monitoring.
4,000원
28.
2023.09
구독 인증기관 무료, 개인회원 유료
As various accidents have occurred in underground spaces, we aim to improve the quality validation standards and methods as specified in the Regulations on Producing Integrated Map of Underground Spaces devised by the Ministry of Land, Infrastructure and Transport of the Republic of Korea for a high-quality integrated map of underground spaces. Specifically, we propose measures to improve the quality assurance of pipeline-type underground facilities, the so-called life lines given their importance for citizens’ daily activities and their highest risk of accident among the 16 types of underground facilities. After implementing quality validation software based on the developed quality validation standards, the adequacy of the validation standards was demonstrated by testing using data from two-dimensional water supply facilities in some areas of Busan, Korea. This paper has great significance in that it has laid the foundation for reducing the time and manpower required for data quality inspection and improving data quality reliability by improving current quality validation standards and developing technologies that can automatically extract errors through software.
4,000원
29.
2023.09
구독 인증기관 무료, 개인회원 유료
This study examines and proposes standardization approaches to address the heterogeneous issues of metadata in drone imagery within the agricultural sector. Image metadata comes in various formats depending on different camera manufacturers, with most utilizing EXIF and XMP. The metadata of cameras used in fixed-wing and rotary-wing platforms, along with the metadata requirements in image alignment software, were analyzed for sensors like DJI XT2, MicaSense RedEdge-M, and Sentera Double4K. In the agricultural domain, multispectral imagery is crucial for vegetation analysis, making the provision of such imagery essential. Based on Pix4D SW, a comparative analysis of metadata attributes was performed, and necessary elements were compiled and presented as a proposed standardization (draft) in the form of tag information.
4,000원
1
2
