브레이싱재를 사용하는 목적은 본 골조체계 즉 기둥과 보에 비해 단면(강성)이 작은 부재로 보강하여 횡력에 대한 강성효과를 크게 향상시키기 위함이다. 브레이싱재의 단면이 기둥과 보의 단면에 비해 월등히 작기 때문에 압축력에 의한 좌굴의 위험성과 휨량의 크기에 비례하여 부재 중앙에 발생되는 추가 모멘트(P-.DELTA. Effect)에 의한 불리한 영향 및 해석상의 어려움 때문에 브레이싱의 설계에 있어서 브레이싱재는 압축력을 받지 않는 것으로 간주하여 왔다. 그러나 최근 들어 구조물 해석에 정확도가 요구되어짐에 따라 브레이싱재의 정확한 거동에 대한 연구가 실험을 통해 활발히 진행되어 왔고, 특히 탄성한계를 지난 소성상태에서 반복하중에 의한 거동 규명이 큰 관심을 끌고 있다. 본 논문에서는 반복하중을 받는 강재 브레이싱재의 비선형 거동을 해석적 방법에 의해 규명했고, 그 결과를 실험결과와 비교하였다.

This study was carried out to investigate the seasonal effect on the recovery rate of embryos in donors and on the conception rate in recipients following embryo transfer. The results obtained from this experiment were summarized as follows: 1. The ovulation point in winter and summer was 28.6 and 28.6, respectively. There was no difference in ovulation point between two seasons. More embryos recovered in the winter (27,0) than the summer (20.9). 2. The number of CL, unruptured follicle, hemorrhagic follicle, young born and pregnancy rate in the winter were 6.0,4.8,1.5,1.8 and 75%, and those in the summer were 2.9,5.7, 3.8, 2.2 and 46.7%, respectively. The rate of synchronization of recipients in the winter showed better results than that in the summer.

본 연구진은 메틸말리올라이드가 인간 피부 세포주인 HaCaT 세포에서 NRF2를 유도하고 이를 통하여 항산화 효과를 나타내는지 알아보았다. MTT assay를 통하여 메틸말리올라이드는 10 μ M 농도에서 24 h 동안 HaCaT 세포에 처리하여도 HaCaT 세포 독성을 나타내지 않는 것을 확인하였다. 본 연구진이 구축한 HaCaT-ARE-GFP-luciferase 세포에 메틸말리올라이드를 처리하고 루시퍼라아제 활성을 측정한 결과 메틸말리올라이드는 양성 대조군인 레스베라트롤보다 ARE 결합에 따른 루시퍼라아제 활성을 더욱 강하게 증가시키는 것을 확인하였다. 또한 HaCaT 세포에 메틸말리올라이드 처리 시 NRF2에 의하여 유도되는 항산화 단백질인 HO-1과 NQO1 mRNA 및 단백질 발현이 통계적으로 유의하게 증가하였다. 마지막으로 메틸말리올라이드는 HaCaT 세포에서 TPA에 의해서 유도된 DNA 및 지질의 산화를 강력하게 억제하였다. 결론적으로 본 연구는 메틸말리올라이드가 NRF2 유도를 통하여 피부 산화적 스트레스를 억제하며 이는 메틸말리올라이드가 신규 항산화 화장품의 소재로 적합하다는 것을 시사한다.

This study is to analyze the spatial structure and POE of Jungja(pavilion) shelter for rural village regeneration. 14 Jungja shelter space at rural villages in Gyungbuk province, were investigated. An interview questionnaire was conducted for total 139 residents as POE. The use behavior and satisfaction for Jungja shelter space, were investigated. The statistical analysis were mean of satisfactions, reliability, factor analysis, and multiple regression analysis. The results and discussions can be objective data for rural village regeneration. In satisfaction level, ‘Continuous use intention’(3.99), ‘Well-suited approach’(3.87), and ‘Helpful in resident living’(3.84) were shown to be high points of agreement in 5 point Likert type scale. But, the mean points were low as 2.01 in ‘Surrounding landscape’, ‘Creation of green areas’(3.22), and ‘Traffic safety’(3.22), respectively. Within use satisfaction, 5 factors were categorized, ‘Use’, ‘Safety’, ‘Facility’, ‘Management’ and ‘Users’. By the result of multiple regression analysis, variables of ‘Continuous use’, ‘Convenient location’, and ‘Image improvement’, were shown to be main affecting variables to overall satisfaction. Furthermore, in spatial structure analysis, 4 types were categorized with the aspect of landform, roads, and location in village. The levels of satisfaction were shown to be high in village type of semi-open, road type of circular, and location type of center/back. Conclusively, these findings could be utilized as basic data and useful tool of space-structural satisfaction analytic method, and for each stage of planning/design and remodeling for rural village regeneration.

The quality and shelf life of sliced root of Platycodon grandiflorum (Doraji) treated by ozon-microbubble-heat shock (OMH) were investigated by combining modified-atmosphere packaging [MAP, (50% O2+15% CO2+35% N2)]. The study was based on microbiological (total viable bacteria, fungi, Enterobacteriaceae and coliforms numbers), physicochemical and sensory changes. OMH treatment was effective in reducing microbial populations of the sliced Doraji, especially Enterobacteriaceae and coliforms reduced by 2 log CFU/g. However OMH-MAP treatment remained the aerobe and fungi numbers. Regarding the color, OMH-MAP delayed the change of Hunter b* and the sliced Doraji by OMH-MAP treatment exhibited lower decrease of flavor and overall acceptability compared to those by polypropylene packaging after tap water treatment (Control). The OMH and 50%O2+15%CO2 MAP treatment gave better sensory quality and extended shelf-life for sliced Doraji (~3 days longer shelf-life than Control). Flavor was significantly related to overall acceptability at both Control and OMH-MAP, whereas total coliforms prevalence was associated with overall acceptability at only OMH-MAP. Therefore microbubble-heat shock treatment may improve microbial safety and sliced Doraji by OMH treatment can stored under 50%O2+15%CO2 treatment for up to 7 days. Thus, OMH and MAP treatment may be used in maintaining the storage quality and marketability of sliced Doraji.

In this study, to evaluate the performance of fire resistance of the mortar with magnesium hydroxide(MH) and aluminium hydroxide(AH) which has a RCC (Radiant Control Capability) as repair material to the steel structure, temperature evaluation of mortar was conducted by increasing 500°C in the furnace. The performance of RCC can decrease a temperature to external and internal mortar. As a result, it is confirmed that temperatures of mortar with magnesium hydroxide(MH) and aluminium hydroxide(AH) were more decreased than general mortar due to the RCC effect of MH and AH. Therefore, it can be possible to apply to a repair material at the steel structure.

This experiment can maximize the decline of the heat on steel structure by using the magnesium hydroxide and aluminum hydroxide which generally used to resistant or retardant. These materials can delay a temperature rise due to the generation of vapors around the fire resistive covering, when reacting with heat by a creating moisture. Therefore, applicability of the fire resistance mortar used magnesium hydroxide and aluminum hydroxide was studied and experimented. As a result, in case of the workability is satisfied with the condition of site, but in case of the bonding strength is not satisfied with the standard with fire resistance mortar.

Groundwater level hydrographs from observation wells in Jeju island clearly illustrate distinctive features of recharge showing the time-delaying and dispersive process, mainly affected by the thickness and hydrogeologic properties of the unsaturated zone. Most groundwater flow models have limitations on delineating temporal variation of recharge, although it is a major component of the groundwater flow system. Recently, a convolution model was suggested as a mathematical technique to generate time series of recharge that incorporated the time-delaying and dispersive process. A groundwater flow model was developed to simulate transient groundwater level fluctuations in Pyoseon area of Jeju island. The model used the convolution technique to simulate temporal variations of groundwater levels. By making a series of trial-and-error adjustments, transient model calibration was conducted for various input parameters of both the groundwater flow model and the convolution model. The calibrated model could simulate water level fluctuations closely coinciding with measurements from 8 observation wells in the model area. Consequently, it is expected that, in transient groundwater flow models, the convolution technique can be effectively used to generate a time series of recharge.

Temporal variation of groundwater levels in Jeju Island reveals time-delaying and dispersive process of recharge, mainly caused by the hydrogeological feature that thickness of the unsaturated zone is highly variable. Most groundwater flow models have limitations on delineating temporal variation of recharge, although it is a major component of the groundwater flow system. A new mathematical model was developed to generate time series of recharge from precipitation data. The model uses a convolution technique to simulate the time-delaying and dispersive process of recharge. The vertical velocity and the dispersivity are two parameters determining the time series of recharge for a given thickness of the unsaturated zone. The model determines two parameters by correlating the generated recharge time series with measured groundwater levels. The model was applied to observation wells of Jeju Island, and revealed distinctive variations of recharge depending on location of wells. The suggested model demonstrated capability of the convolution method in dealing with recharge undergoing the time-delaying and dispersive process. Therefore, it can be used in many groundwater flow models for generating a time series of recharge.

The contents of index components in 5 medicinal crops cultivated at different heights in Andong area. Thecontents of allantoin in Dioscorea batatas Decne and catalpol in Rehmannia glutinosa Liboschitz were not differentby cultivation heights (100~200m). But the contents of index components in Astragalus membranaceus and Angelica acutilobaKitagawa were higher in samples cultivated at elevated heights. At 700m of heights, the contents of formononetin andastragaloside I in Astragalus membranaceus were 1.20 and 201.2㎍/g, respectively. The contents of decursin and nodakeninin Angelica acutiloba Kitagawa were 68.3 and 4.20㎎/g, respectively. Thus Astragalus membranaceus and Angelica acutilobaKitagawa are recommended to be cultivated in higher altitude.

In this paper, studied on the continuous Up and Down Prestressed Concrete (UD PSC) girder bridge in which the reinforced concrete pier cap is integral with the part of girders in superstructure were performed. In previous studies, it is known that the structural behavior of continuous UD PSC girder bridge is quite different compared to the one of the bridges with conventional bearings or shoes to support the loading from girders. Nevertheless, it has hardly been studied about the structural behavior of bridge with UD PSC girder. Therefore, in this study, various static behaviors of continuous UD PSC girder bridge with integral pier cap have been analyzed using numerical method.

건설환경의 지속적인 변화로 인하여 교량 건설비용의 최소화뿐만 아니라 공용기간중의 유지관리를 포함한 전체 비용의 최소화 및 최적화의 요구가 증가하고 있다. 이러한 이유로 교량의 상부구조에서 하부구조로 힘을 전달하기 위해 사용되는 교량받침 대신에 스터드나 연결철근 등과 같은 연결재를 사용하여 교량의 상부구조와 하부구조를 라멘식으로 일체화 시킨 교량형식이 제시되고 있다. 이 논문은 교량의 상부구조 형식을 연속 UD PSC 거더로 하여 철근콘크리트 교각과 일체화 시킨 교각일체형 연속 UD PSC 거더교를 대상으로 한다. 교각일체형 연속 UD PSC 거더교는 라멘교 형식과 거더교 형식을 결합한 교량으로 일반 받침형식의 교량과 상이한 거동특성을 나타낸다. 하지만 거동 특성에 대해 명확히 규명되어 있지 않다. 따라서 본 논문에서는 해석적 방법을 이용하여 교각일체형 연속 UD PSC 거더교의 동적거동 특성을 분석하고 2, 3경간 교각일체형 연속 UD PSC 거더교에 적용할 수 있는 충격계수 산정식을 제시하였다.

In recent days, photochemical smog due to the rapid industry development and vehicle increasement has become a critical pollutant in the metropolitan area and the number of ozone alarm signal has increased every year. This research was performed to evaluate VOCs emission source characteristics and concentration of VOCs in Daegu. The site average concentration was observed in the following order : industrial area > commercial area > residential area. Most of the VOCs species except toluene showed variations with higher concentration during nighttime, and lower concentration during the daytime. The major VOCs of stationary emission source were BTEX(benzene, toluene, ethylbenzene, xylene) and methylene chloride, trichloroethene and styrene. Also, those of automobile exhaust were toluene and benzene. Also, the major VOCs concentration emited by the vehicle fuel was observed in the following order : gasoline > light oil > liquefied petroleum gas (L.P.G). Correlation coefficients values were estimated between major VOCs such as toluene, ethylbenzene, m,p-xylene, o-xylene. Results showed that correlation coefficient values were significant magnitude above 0.76. Also, there showed highly significant correlations among ethylbenzene, m,p-xylene, and o-xylene concentration(Pearson correlation coefficients, r= 0.868～0.982). Calculated correlation coefficients among commercial area, industrial area and residential area were 0.934～0.981, they showed high correlation. There showed highly correlation between stationary emission source and industrial area, compared with commercial area and residential area. Also, calculated correlation coefficients among commercial area, industrial area, residential area and automobile exhaust were 0.732, 0.725, 0.777, respectively.