Intermuscular fat is essential for enhancing the flavor and texture of cultured meat. Mesenchymal stem cells derived from intermuscular adipose tissues are a source of intermuscular fat. Therefore, as a step towards developing a platform to derive intermuscular fat from mesenchymal stem cells (MSCs) for insertion between myofibrils in cultured beef, an advanced protocol of intermuscular adipose tissue dissociation effective to the isolation of MSCs from intermuscular adipose tissues was developed in cattle. To accomplish this, physical steps were added to the enzymatic dissociation of intermuscular adipose tissues, and the MSCs were established from primary cells dissociated with physical step-free and step-added enzymatic dissociation protocols. The application of a physical step (intensive shaking up) at 5 minutes intervals during enzymatic dissociation resulted in the greatest number of primary cells derived from intermuscular adipose tissues, showed effective formation of colony forming units-fibroblasts (CFU-Fs) from the retrieved primary cells, and generated MSCs with no increase in doubling time. Thus, this protocol will contribute to the stable supply of good quality adipose-derived mesenchymal stem cells (ADMSCs) as a fat source for the production of marbled cultured beef.

본 연구에서 Nematus tibialis를 국내에서 처음으로 보고한다. 이 종의 사진과 진단, 색 변이, 발육 단계와 분포 등을 제공하였다.

Current studies have revealed the capacity of mesenchymal stem cells (MSCs) in term of immunomodulatory properties, and this distinct potential is downgraded according to the disease duration of patients-derived MSCs. In order to enhance the immunomodulatory and anti-tumorigenic properties of the rheumatoid arthritis (RA) joints-derived MSCs, we aggregate synovial fluid-derived MSCs from RA joints (RA-hMSCs) into 3D-spheroids by the use of hanging drop culture method. Cells were isolated from synovial fluids of RA joints with longstanding active status over 13 years. For aggregation of RA-hMSCs into 3D-spheroids, cells were plated in hanging drops in 30 μL of advanced DMEM (ADMEM) containing 25,000-30,000 cells/ drop and cultured for 48 h. To analyze the comparative immunomodulatory effects of 3D-spheroid and 2D monolayer cultured RA-hMSCs and then cells were cultured in ADMEM supplemented with 20% of synovial fluids of RA patients for 48 h and were evaluated by qRT-PCR for their expression of mRNA levels of inflammatory and antiinflammatory markers. Cellular aggregation of RA-hMSCs was observed and cells were aggregate into a single sphere. Following treatment of RA patient’s synovial fluids into the RA-hMSCs, spheroids formed RA-hMSCs showed significantly (p < 0.05) higher expression of TNFα stimulated gene/protein 6 (TSG-6) than the monolayer cultured RAhMSCs. Therefore, the 3D-spheroid culture methods of RA-hMSCs were more effective than 2D monolayer cultures in suppressing inflammatory response treated with 20% of RA-synovial fluids by expression of TNFα (TSG-6) according to the immune response and enhanced secretion of inflammatory factors.

Pseudo-pheochromocytoma is defined as an adrenal tumor that has the typical characteristics of pheochromocytoma likely hypertension but is histopathologically diagnosed to other types of adrenal tumors. 11-year-old, castrated male Maltese presented for a left adrenal mass with hypertension. According to clinical signs and radiological features, a temporary diagnosis was made of pheochromocytoma. The adrenalectomy was performed and the histopathological examination of the resected adrenal gland was diagnosed as cortical adenocarcinoma. This report describes the case of pseudo-pheochromocytoma in a dog and implies the salience that even if pheochromocytoma is diagnosed based on all test results, pseudo-pheochromocytoma should not be excluded.

The biological efficiencies of promising Pleurotus spp. were evaluated. Pleurotus ostreatus, Pleurotus tuberregium,and Pleurotus sajor-cajuwere investigated at temperatures of 22oC, 20oC, and 18oC to determine their ability to adapt to temperatures that are likely to be found in subtropical regions. The experiment was conducted using a substrate comprising Popular sawdust 60% + cotton seed 20% + beet pulp 20% under a relative humidity of 65%. The results indicated that there were significant differences in terms of biological efficiency between the species: P. tuber regium 128.84% at 22oC, P. ostreatus 108.41% at 22oC, and P. sajor-caju is 80% at 20oC. The common temperatures at which all species showed the highest biological efficiencies were 22oC and 20oC. Therefore, the production of the evaluated species was equal to or surpassed biological efficiencies reported in tropical environments, thereby demonstrating a potential opportunity to adapt to tropical environments without compromising quality standards.

Ticks and tick-borne pathogens are among the main sources of interest in veterinary medicine and public health. This review aimed to cover published data on tick species and their geographical distribution in Korea. Over 143 articles regarding ticks were published between 1966 and 2022, and reporting at least 29 species belonging to the family Ixodidae and five belonging to the family Argasidae. Among these, Haemaphysalis longicornis, H. flava, and Ixodes nipponensis were the main genera distributed nationwide, whereas Amblyomma was mostly identified in the southern region. Conversely, only a limited number of Argasidae ticks were present, including the genera Argas and Ornithodoros. Considering the changes in tick distribution patterns due to global warming, continuous nationwide monitoring of ticks is required.

PURPOSES : The aim of this study is to evaluate the effects of air voids, binder content, and aggregate gradation on the indirect tensile strength (IDT) and cracking tolerance index (CTindex) of cored asphalt pavements. METHODS : Cored samples were obtained from roads in Incheon city, and several laboratory experiments were performed. First, the cored samples were first to cut into a size appropriate for the IDT test. Subsequently, the air voids of the samples were measured. The damaged sample from the IDT test was loose mixed at 150 ℃ before the binder content was determined, which was conducted via an asphalt extraction test. Finally, the clean aggregates obtained from asphalt extraction process were analyzed in the aggregate gradation test. RESULTS : The result shows that an increase in air voids from 4% to 8% decreases the IDT and cracking tolerance index (CTindex) by 30% and 28%, respectively. Incorporating a binder enhances the ductile behavior of the asphalt mixture, resulting in a higher CTindex. Finally, the contribution of the aggregate grade on the IDT and CTindex is negligible. CONCLUSIONS : The IDT and CTindex are primarily affected by the air voids and binder content. A higher percentage of air voids results in a lower IDT. In addition, a higher amount of binder increases the IDT and CTindex of the cored samples. Meanwhile, the aggregate grade does not affect the IDT.

본 연구에서 Tetraneura triangula 를 국내에서 처음으로 보고한다. 이 종의 분포지역, 기주식물, 형태학적 정보를 제공하였다.

Protoplasts were isolated from the primary leaves of lettuce (Lactuca sativa L.) seedlings 10 days after in vitro germination. The leaves were stripped and incubated in an enzyme mixture consisting of 1.2% Cellulase R-10 and 0.3% Macerozyme R-10 in cell and protoplast washing solution (CPW) overnight. The average protoplast yield was 8.25 x 106 protoplasts per g of fresh leaf tissue. When protoplasts were cultured at a density of 3.0 × 105 protoplasts/mL in agarose solid KM8P/KM8 medium, first and second divisions were observed in the protoplasts within a week. Protoplast-derived microcolonies formed after 4 weeks of culture, and visible colonies were present after 3 months of culture. Protoplast-derived microcalli were transferred to Murashige and Skoog medium supplemented with 2.0 mg/L kinetin and 0.1 mg/L NAA and incubated in the light for 3 weeks. They grew into callus, which then regenerated into plants after 7 weeks of culture. The regenerated plants grew as apparently normal flowering fertile plants.

As the decommissioning and decontamination (D&D) of nuclear power plants (NPPs) has actively proceeded worldwide, the management of radiation exposure of workers has become more critical. Radioactive aerosol is one of the main causes of worker exposure, contributing to internal exposure by inhalation. It occurs in the process of cutting radioactive metal structures or melting radioactive wastes during D&D, and its distribution varies according to decommissioning strategies and cutting methods. Among the dominant radionuclides in radioactive aerosols, Fe-55 is known to be the most abundant. Fe-55, which decays by electron capture, is classified as a difficult-to-measure (DTM) radionuclide because its emitted X-rays have too low energy to measure directly from outside of the container. Generally, for measuring DTM nuclides, the liquid scintillation counting (LSC) method and the scaling factor (SF) method are used. However, these methods are not suitable for continuous monitoring of the D&D workplace due to the necessity of sampling and additional analysis. The radiation measurement system that can directly measure the radionuclides collected at the aerosol filter could be more useful. In this study, as preliminary research on developing the radioactive aerosol monitoring system, we fabricated a gamma-ray spectrometer based on a NaI (Tl) scintillator and measured the energy spectrum of Fe-55. A beryllium window was applied to the scintillator for X-ray transmission, and the Fe-55 check source was directly attached to the scintillator assuming that the aerosol filter was equipped. 5.9 keV photopeak was clearly observed and the energy resolution was estimated as 44.10%. Also, the simultaneous measurement with Cs-137 was carried out and all the peaks were measured.

Plastic scintillators can be used to find radioactive sources for portal monitoring due to their advantages such as faster decay time, non-hygroscopicity, relatively low manufacturing cost, robustness, and easy processing. However, plastic scintillators have too low density and effective atomic number, and they are not appropriate to be used to identify radionuclides directly. In this study, we devise the radiation sensor using a plastic scintillator with holes filled with bismuth nanoparticles to make up for the limitations of plastic materials. We use MCNP (Monte Carlo N-particle) simulating program to confirm the performance of bismuth nanoparticles in the plastic scintillators. The photoelectric peak is found in the bismuth-loaded plastic scintillator by subtracting the energy spectrum from that of the standard plastic scintillator. The height and diameter of the simulated plastic scintillator are 3 and 5 cm, respectively, and it has 19 holes whose depth and diameter are 2.5 and 0.2 cm, respectively. As a gamma-ray source, Cs-137 which emits 662 keV energy is used. The clear energy peak is observed in the subtracted spectrum, the full width at half maximum (FWHM) and the energy resolution are calculated to evaluate the performance of the proposed radiation sensor. The FWHM of the peak and the energy resolution are 61.18 keV and 9.242% at 662 keV, respectively.

Decommissioning waste is generated at all stages during the decommissioning of nuclear facilities, and various types of radioactive waste are generated in large quantities within a short period. Concrete is a major building material for nuclear facilities. It is mixed with aggregate, sand, and cement with water by the relevant mixing ratio and dried for a certain period. Currently, the proposed treatment method for volume reduction of radioactive concrete waste was involved thermomechanical and chemical treatment sequentially. The aggregate as non-radioactive materials is separated from cement components as contaminated sources of radionuclides. However, to commercialize the process established in the laboratory, it is necessary to evaluate the scale-up potential by using the unit equipment. In this study, bench-scale testing was performed to evaluate the scale-up properties of the thermomechanical and chemical treatment process, which consisted of three stages (1: Thermomechanical treatment, 2: Chemical treatment, 3: Wastewater treatment). In the first stage, lab, bench, and pilot scale thermomechanical tests were performed to evaluate the treated coarse aggregate and fines. In the second stage, the fine particles generated by the thermomechanical treatment process, were chemically treated using dissolution equipment, after then the removal efficiency and residual of cement in the small aggregate was compared with laboratory results. The final stage, the secondary wastewater containing contaminant nuclides was treated, and the contaminant nuclides could be removed by chemical precipitation method in the scale-up reactors. Furthermore, an additional study was required on the solid-liquid separation, which connected each part of the equipment. It was conducted to optimize the separation method for the characteristics of the particles to be separated and the purpose of separation. Therefore, it is expected that the basic engineering data for commercialization was collected by this study.