Decommissioning waste is generated at all stages during the decommissioning of nuclear facilities, and various types of radioactive waste are generated in large quantities within a short period. Concrete is a major building material for nuclear facilities. It is mixed with aggregate, sand, and cement with water by the relevant mixing ratio and dried for a certain period. Currently, the proposed treatment method for volume reduction of radioactive concrete waste was involved thermomechanical and chemical treatment sequentially. The aggregate as non-radioactive materials is separated from cement components as contaminated sources of radionuclides. However, to commercialize the process established in the laboratory, it is necessary to evaluate the scale-up potential by using the unit equipment. In this study, bench-scale testing was performed to evaluate the scale-up properties of the thermomechanical and chemical treatment process, which consisted of three stages (1: Thermomechanical treatment, 2: Chemical treatment, 3: Wastewater treatment). In the first stage, lab, bench, and pilot scale thermomechanical tests were performed to evaluate the treated coarse aggregate and fines. In the second stage, the fine particles generated by the thermomechanical treatment process, were chemically treated using dissolution equipment, after then the removal efficiency and residual of cement in the small aggregate was compared with laboratory results. The final stage, the secondary wastewater containing contaminant nuclides was treated, and the contaminant nuclides could be removed by chemical precipitation method in the scale-up reactors. Furthermore, an additional study was required on the solid-liquid separation, which connected each part of the equipment. It was conducted to optimize the separation method for the characteristics of the particles to be separated and the purpose of separation. Therefore, it is expected that the basic engineering data for commercialization was collected by this study.

Radioactively contaminated metal components from a nuclear power plant must be decontaminated to reduce the risk of radiation exposure to workers, which can be cleaned using a foam decontamination used to reduce the amount of wastewater significantly. Metal components with a fixed radioactive contamination can be effectively decontaminated using a foam consist of 0.5wt% nonionic surfactant, 0.5 M H2SO4, and 0.2 M Ce(SO4)2. However, strongly acidic wastewater is generated from the decontamination method, which contains a high concentration of the nonionic surfactant and ionic materials with radioactive nuclides. This wastewater must be treated as a stable form. In this study, an integrated process of precipitation and low pressure distillation was evaluated for the treatment of wastewater. It was confirmed that the surfactant and ionic materials were effectively removed from the wastewater through the integrated process.