본 연구는 편백나무 잎 분획물의 항염증 기능성 소재로서의 활용 가능성을 평가하기 위해 99% 에탄올로 추출한 편백잎 추출물 (CO99EL)을 헥산 (CO99EL-H), 클로로포름 (CO99EL-C), 에틸 아세테이트 (CO99EL-E), 부탄올 (CO99EL-B)과 증류수 (CO99EL-W) 순서대로 분획하였다. 각각의 분획물의 항염증 효과는 LPS로 유도된 RAW264.7 마우스 대식세포를 이용하여 수행하였다. 세포독성은 CO99EL-H와 CO99EL-C에서 가장 높았으며 CO99EL-W에서 가장 낮음을 확인하였다. 흥미롭게도, LPS로 유도된 iNOS의 발현과 NO의 생산은 CO99EL-H와 CO99EL-E에 의해 현저하게 감소하였고, COX-2의 발현은 CO99EL-B와 CO99EL-W에 의해 현저하게 감소하였다. 또한, LPS에 의해 증가된 염증성 사이토카인인 interleukin(IL)-1β는 CO99EL-C, CO99EL-E, CO99EL-B와 CO99EL-W에 의 해 현저하게 감소하였고, IL-6는 CO99EL-B와 CO99EL-W에 의해 현저하게 감소하였다. 그뿐만 아니 라, LPS에 의해 활성화된 janus kinase (JAK)/signaling transducer and activator of transcription (STAT) 신호 전달 경로는 CO99EL-H와 CO99EL-C에 의해 상당히 감소하였고, mitogen-activated protein kinase (MAPK)은 CO99EL-C에 의해 약간 감소하였다. 하지만, nuclear factor (NF)-κB의 활 성은 어떤 분획물도 감소시키지 못했다. 본 연구의 결과를 통해, CO99EL의 분획물들은 분획에 사용되 는 용매에 따라 항염증 작용기전이 다름을 확인하였다.

세라믹 분리막은 높은 열적, 화학적 안정성을 갖기 때문에 극한의 조건에서 운전되는 다양한 산업 공정에 적용할 수 있다. 그러나 투과도와 기계적 강도의 trade-off 현상에 의한 세라믹 분리막 활용에 제약이 있어, 고투과성-고강도 분리막 의 개발이 필요하다. 본 연구에서는 상전이-압출법으로 알루미나 중공사 분리막을 제조하고, 고분자 바인더의 종류와 그 혼합 비에 따른 분리막의 특성 변화를 관찰하였다. 용매인 DMAc (Dimethylacetamide)와 고분자 바인더의 한센 용해도 인자를 비 교하면, PSf (polysulfone)가 DMAc와 높은 용해도 특성을 갖기 때문에 도프 용액의 점도와 토출압력이 높게 나타나 분리막 내부가 치밀한 구조로 형성되기 때문에 높은 기계적 강도를 갖으나 수투과도가 감소하는 것으로 확인되었다. 그에 반해, PES (polyethersulfone)를 이용하여 분리막을 제조하면 기계적 강도가 다소 감소하고 수투과도가 증가하는 것으로 나타났다. 따라 서 분리막 성능과 물성을 최적화하기 위해 PSf와 PES를 혼합하여 분리막을 제조하였으며, 9:1로 혼합하여 제조된 분리막에 서 최적화된 수투과도와 기계적 강도를 얻을 수 있었다.

Species distribution model (SDM) is used to preserve biodiversity and climate change impact. To evaluate biodiversity, various studies are being conducted to utilize and apply SDM. However, there is insufficient research to provide useful information by identifying the current status and recent trends of SDM research and discussing implications for future research. This study analyzed the trends and flow of academic papers, in the use of SDM, published in academic journals in South Korea and provides basic information that can be used for related research in the future. The current state and trends of SDM research were presented using philological methods and text-mining. The papers on SDM have been published 148 times between 1998 and 2023 with 115 (77.7%) papers published since 2015. MaxEnt model was the most widely used, and plant was the main target species. Most of the publications were related to species distribution and evaluation, and climate change. In text mining, the term ‘Climate change’ emerged as the most frequent keyword and most studies seem to consider biodiversity changes caused by climate change as a topic. In the future, the use of SDM requires several considerations such as selecting the models that are most suitable for various conditions, ensemble models, development of quantitative input variables, and improving the collection system of field survey data. Promoting these methods could help SDM serve as valuable scientific tools for addressing national policy issues like biodiversity conservation and climate change.

우리나라 여러 해양환경 지역으로부터 확보한 370주의 해양세균, 균류, 미세조류로부터 기초생 리활성(항산화, 항염, 항균, 항암, 항바이러스)을 조사하여 채집지, 분리원, 종(種) 수준에서의 활성결과를 비교하였다. 해양세균의 경우, 일반적으로 유용성이 많이 알려진 Streptomyces 속 과 Bacillus 속에 속하는 균주들이 두드러진 강한 효능이 관찰되었고, 주로 해양퇴적물로부터 유용한 자원을 분리할 수 있었다. 해양균류와 미세조류의 경우에도 종 특이적으로 활성이 강 하게 나타나는 결과를 확인할 수 있었고, 효능 특이적으로 활성을 보이는 결과도 얻을 수 있었 다. 이러한 결과를 바탕으로 추후 특정질병에 선택적으로 효능을 보이는 화학물질 연구 또는 자원 기반 연구 수행 시 유용성을 전제로 한 자원 확보 전략 수립과 산업 활성화를 위한 전 략소재로 우선적 접근이 용이할 수 있는 연구결과라 생각된다. 또한, 이들 결과를 해양바이오 뱅크를 통한 분양소재로 활용함으로써 학계, 산업계에서 활용하여 해양바이오산업 활성화에 좀 더 빠른 접근을 도울 수 있다고 생각한다.

This study is in order to the effect of 1-methlycyclopropene (1-MCP) treatment and film package as modified atmosphere packaging (MAP) on the changes in fruit quality factors of 'Daehong' peaches during cold storage. The concentrations of 1-MCP were treated at 1μL·L-1 and 2μL·L-1, and peaches in film package were stored for 28 days in cold storage at 5±1°C and 85±5% RH. The fruits stored carton box were used as a control of MAP, and 1-MCP free fruits were used as the control of both packages. Rate of fresh weight loss during storage was not significantly different between groups with and without 1-MCP treatment, but was higher in the box package than in the MAP. The control group had a higher incidence of both gases with the 1-MCP treatment group showing statistically significantly low. Carbon dioxide in the package was lowered by about 12% compared to the non-treated group, and the ethylene concentration was maintained at 1μL·L-1, showing a significance low compared to other treated groups. As the storage period elapsed, the firmness of 1-MCP and MAP treated fruits remained significant at 5-9% compared to the control group. Regardless of the packaging method Hunter a* values of exocarp and mesocarp were significantly higher in fruit treated with 1-MCP 1μL·L-1 treatment than in the control group, and anthocyanin was significantly higher in the fruit during the storage period, especially high in MAP. In summary, fruits of MAP group with 1-MCP 1μL·L-1 had rate of lower respiration and ethylene production, and little changes in firmness, Hunter a* values of exo-carp and meso-carp, and anthocyanin, which is considered the most suitable method for preserving postharvest quality of the peach cultivar during the storage.

Lithium (Li) is a key resource driving the rapid growth of the electric vehicle industry globally, with demand and prices continually on the rise. To address the limited reserves of major lithium sources such as rock and brine, research is underway on seawater Li extraction using electrodialysis and Li-ion selective membranes. Lithium lanthanum titanate (LLTO), an oxide solid electrolyte for all-solid-state batteries, is a promising Li-ion selective membrane. An important factor in enhancing its performance is employing the powder synthesis process. In this study, the LLTO powder is prepared using two synthesis methods: sol-gel reaction (SGR) and solid-state reaction (SSR). Additionally, the powder size and uniformity are compared, which are indices related to membrane performance. X-ray diffraction and scanning electron microscopy are employed for determining characterization, with crystallite size analysis through the full width at half maximum parameter for the powders prepared using the two synthetic methods. The findings reveal that the powder SGR-synthesized powder exhibits smaller and more uniform characteristics (0.68 times smaller crystal size) than its SSR counterpart. This discovery lays the groundwork for optimizing the powder manufacturing process of LLTO membranes, making them more suitable for various applications, including manufacturing high-performance membranes or mass production of membranes.

The demand for energy is steadily rising because of rapid population growth and improvements in living standards. Consequently, extensive research is being conducted worldwide to enhance the energy supply. Transpiration power generation technology utilizes the vast availability of water, which encompasses more than 70% of the Earth's surface, offering the unique advantage of minimal temporal and spatial constraints over other forms of power generation. Various principles are involved in water-based energy harvesting. In this study, we focused on explaining the generation of energy through the streaming potential within the generator component. The generator was fabricated using sugar cubes, PDMS, carbon black, CTAB, and DI water. In addition, a straightforward and rapid manufacturing method for the generator was proposed. The PDMS generator developed in this study exhibits high performance with a voltage of 29.6 mV and a current of 8.29 μA and can generate power for over 40h. This study contributes to the future development of generators that can achieve high performance and long-term power generation.

PURPOSES : This study investigated the field applicability of pervious concrete to pavement base courses. Pervious concrete was developed at laboratory level, and the compaction methods, field moisture content, and fundamental properties when the material was constructed in the field were studied. METHODS : Field-applied pervious concrete was compacted at different levels using a tandem roller, and cores were taken to investigate the compressive strength, infiltration rate, continued porosity, and freeze-thaw resistance. In addition, the optimum field construction and quality control of the moisture content of a batch plant were measured. RESULTS : The moisture content of pervious concrete has an essential effect on workability and quality control during field test construction. From the test herein, the optimum value at a batch plant was found to be approximately 2.5±0.1%. The compaction level is also a crucial parameter at construction sites because it affects the mechanical and penetration properties. Considering both compressive strength and drainage, the recommended compaction was three times the round trip when a tandem roller was used. The penetration coefficient was 0.88 cm/sec when applying three times the round trip of the tandem roller. The freezing and thawing weight loss rates of the applied pervious concrete satisfied the required condition of 14% or less, regardless the compaction level. CONCLUSIONS : With the suggested mixed proportions of pervious concrete, the recommended compaction was three times the round trip of a tandem roller and a moisture content of approximately 2.5±0.1% from a batch plant. When these conditions were satisfied, the mechanical and drainage properties satisfied the required criteria.

Forest destruction is an inevitable result of the development processes. According to the environmental impact assessment, over 10% of the destroyed trees need to be recycled and transplanted to minimize the impact of forest destruction. However, the rate of successful transplantation is low, leading to a high rate of tree death. This is attributable to a lack of consideration for environmental factors when choosing a temporary site for transplantation and inadequate management. To monitor transplanted trees, a field survey is essential; however, the spatio-temporal aspect is limited. This study evaluated the applicability of remote sensing for the effective monitoring of transplanted trees. Vegetation indices based on satellite remote sensing were derived to detect time-series changes in the status of the transplanted trees at three temporary transplantation sites. The mortality rate and vitality of transplanted trees before and after the transplant have a similar tendency to the changes in the vegetation indicators. The findings of this study showed that vegetation indices increased after transplantation of trees and decreased as the death rate increased and vitality decreased over time. This study presents a method for assessing newly transplanted trees using satellite images. The approach of utilizing satellite photos and the vegetation index is expected to detect changes in trees that have been transplanted across the country and help to manage tree transplantation for the environmental impact assessment.

This study aimed to investigate the need for dietary education and programs for young Koreans belonging to singleperson households in the metropolitan area. A total of 500 young adults aged 19-34 participated in the study through an online survey. Participants responded to questions on general characteristics, dietary problems, and the need for dietary education and programs. The subjects were divided into three groups as follows: Undergraduate students, employed workers, and others. Among the subjects from single-person households, 20.2, 67, and 12.8% were undergraduate students, employed workers, and others, respectively. When asked for their estimation of an appropriate self-pay when participating in a cooking class, 39.8% of total subjects responded ‘5,000-10,000 won’. The most preferred program for young adults in single-person households was the ‘support food package’. For the preferred method of dietary education, undergraduate students showed a greater preference for classes ‘at campuses’. However, employed workers and others had a higher preference for ‘non-face-to-face online classes’. Undergraduate students tended to generally have a higher preference for dietary education and support programs compared to employed workers and others. This study provides data that will be useful for establishing healthy dietary policies and education programs for young single-person households in Korea.

Known for its effectiveness in weight loss and diabetes prevention, Gymnema sylvestre products can be found in the US, Japanese, and Indian markets. However, the recommended dosage or safety of these products has not yet been proven. Therefore, development of an analytical method for detecting the content of Gymnema sylvestre in food products is required. Accordingly, this study proposes an analysis method that can examine Gymnema sylvestre in food using LC-ESI-MS/MS and KASP (Kompetitive Allele-Specific PCR) markers. In LC-ESI-MS/MS, a simultaneous analysis method for gymnemic acid and deacylgymnemic acid was optimized using negative ionization mode, and its validation test was completed for solid and liquid samples. In addition, KASP markers were prepared by finding the specific SNP of G. sylvestre in ITS2 and matK through DNA barcodes. The two KASP markers returned positive FAM fluorescence result when combined with G. sylvestre, and this aspect was confirmed in raw G. sylvestre as well. The applicability of the method was tested on 21 different food and healthy functional products containing G. sylvestre purchased on the internet. As a result, although there was a difference in the ratios of gymnemic acid and deacylgymnemic acid in LC-ESI-MS/MS, the index component was detected in all 21 products samples. In the KASP analysis, 9 products returned positive FAM result, and the rest of the products were found to be containing G. sylvestre extract. This study is the first study to use the dual system of LC-ESI-MS/MS and KASP for the analysis of G. sylvestre. The study has confirmed that these two methods are applicable to the examine G. sylvestre content in food products.

Aluminum nitride having a dense hexagonal structure is used as a high-temperature material because of its excellent heat resistance and high mechanical strength; its excellent piezoelectric properties are also attracting attention. The structure and residual stress of AlN thin films formed on glass substrate using TFT sputtering system are examined by XRD. The deposition conditions are nitrogen gas pressures of 1 × 102, 6 × 103, and 3 × 103, substrate temperature of 523 K, and sputtering time of 120 min. The structure of the AlN thin film is columnar, having a c-axis, i.e., a <00·1> orientation, which is the normal direction of the glass substrate. An X-ray stress measurement method for crystalline thin films with orientation properties such as columnar structure is proposed and applied to the residual stress measurement of AlN thin films with orientation <00·1>. Strength of diffraction lines other than 00·2 diffraction is very weak. As a result of stress measurement using AlN powder sample as a comparative standard sample, tensile residual stress is obtained when the nitrogen gas pressure is low, but the gas pressure increases as the residual stress is shifts toward compression. At low gas pressure, the unit cell expands due to the incorporation of excess nitrogen atoms.

This study sought to investigate the association between the food literacy (FL) of children and mothers, and the maternal feeding style. Study subjects were mothers (n=400) with children in the 4th to 6th grades of elementary school and who were the primary caregivers for their children (n=400). The responses to the Caregiver’s Feeding Styles Questionnaire (CFSQ) were obtained from mothers. Both mothers and children completed the questionnaire for socio-demographics, dietary habits, health status, and food literacy. The high demanding/high responsive feeding style was associated with increased meal frequency for both mothers and children. The low demanding/low responsive feeding style was significantly associated with a lower mother’s FL after accounting for confounding factors. The low demanding feeding styles were associated with the child’s lower FL after adjustments for the age, sex, weight status of the child and the age, household income, and education of the mother. However, this association was not seen after making an additional adjustment for the mother’s FL. These results suggest that the caregiver’s feeding style may affect the dietary habits and FL of both mother and child.