급속한 도시화, 마이카 시대의 도래 등으로 증가하는 주차 수요에 대응하기 위하여 공동주택에서도 지하주차장이 도입되었으며, 초고층 공동주택의 보급 확대, 보행자 안전 확보 및 쾌적한 단지 환경 조 성을 위하여 단지내 차량 동선이 지하화 되는 등 지하주차장의 규모가 점차 증가하고 있다. 현재 공동 주택의 지하주차장은 지하 2층 이상으로 심도가 점차 깊어지고 있으며 이에 따라 일상적으로 지하 수 위 이하에 위치하게 되어 상시 수압에 노출될 수 있으므로 누수 방지를 위한 방수공법은 중요한 설계 요소가 되었다. 지하주차장에 적용되고 있는 방수 공법을 살펴보면 초기 지하 1층 정도의 저심도의 지 하주차장에서는 액체방수와 유도배수 등이 적용되어 왔고 이러한 내방수 공법들은 지하주차장 골조 내부에 시공하여 시공이 쉽고 보수 등의 유지관리가 쉬운 장점이 있지만 유입되는 물을 내부에서 배 수처리시킴으로 구조체 내부로 물의 유입을 허용한다는 측면에서 지하수위가 높아 수압이 많이 작용 하는 지반에 적합하지 않다. 반면 외방수 공법은 지하구조물 외부에 연속적인 막을 형성하는 공법으로 골조 외부에 시공하기 때문에 물의 침투를 원천적으로 방지할 수 있어 방수성능이나 내구성 등의 측 면에서 유리하지만 시공을 위한 작업공간의 확보가 필요해 도심지와 같이 협소한 현장에서는 적용이 어렵고 또한 되메우기 이후에 방수재가 파손되는 등 문제가 발견된 경우 보수가 불가능하다는 단점이 있다. 현재 외방수 공법은 주로 시트형태의 방수재료를 구체면에 부착하고 후속 공정에서 발생할 수 있는 시트의 파손을 방지하기 위한 보호층을 설치하는 방법으로 시공되는 것이 일반적인 형태이다. 외 방수 공법과 관련된 표준시방서(KCS) 및 한국산업규격(KS) 등을 보면, 각종 방수재의 시험항목은 유 사하나 제시하고 있는 품질기준 값이 서로 큰 차이를 보이고 있다는 점에서 지하주차장에서 요구되는 방수성능이 명확하게 제시되었다고는 보기에는 한계가 있다. 따라서 본 연구에서는 지하주차장의 방수 성능을 확보하기 위하여 누수 원인이 될 수 있는 시공적 요인, 환경적 요인 및 지하주차장의 구조적 거동 등을 종합적으로 분석하여 지하주차장에서 요구되는 방수재료의 성능기준 및 시공측면에서의 개 선 사항 등을 도출하고자 한다.

호산구성 장염에 의한 급성 췌장염은 매우 드문 질환으로 증상 및 검사실 소견이 특별하지 않아 진단이 어렵다. 급성 췌장염의 원인이 명확하지 않은 경우, 가능한 원인으로 매우 드물지만 호산구성 위장염이 있을 수 있으며, 본 저자들은 호산구성 위십이지장염에 의해 발생한 재발성 급성 췌장염을 진단하고 류코트리엔 수용체 길항제로 치료하였던 증례를 문헌고찰과 함께 보고한다.

Recently, interest in OSC(Off Site Construction) is increasing due to the trend of a decrease in skilled workers and an increase in labor costs. In this regard, PC(Precast Concrete) is being reviewed for apartments, the most common type of housing in Korea. As the biggest concern for PC apartment houses, civil complaints such as inter-floor noise and leakage were presented. In this study, the details of the joints were reviewed based on the past cases of PC apartments, and the details of the recently constructed or planned PC apartments were investigated. Through this, the leakage path in the past was analyzed through the existing research literature and data. And wall type RC and PC apartment joint leakage test was performed and we found the needs for a detail of waterproof steps, sealant. Also, joint details were investigated for a rahmen type apartment housing under construction. At last, A discussion was conducted on the direction for a detailed proposal of an improved joint in the future.

This study was conducted to evaluate the performance of the octopus pot according to mesh sizes. Entering behavior of Octopus minor and bait (Macrophthalmus japonicus) escape rate on the mesh sizes of the pots were investigated for six times in indoor tank. The sea trials for evaluating the performance of Octopus minor pot to different mesh sizes (22, 20 and 18 mm) were conducted for six times from 2017 to 2018 in the coastal sea of Deukyang Bay, the Republic of Korea. Behavior patterns of contact pot to leaved pot were more frequent than contact pot to bait search. When the octopus contacted to the pot, there was no clear search behavior to distinguish the mesh sizes. Total catch of 46% was accounted for 18 mm pots, followed by 34% at 20 mm and 20% at 22 mm (P < 0.05). Catch per unit effort was calculated as 30 g/pot at 22 mm, 44 g/pot at 20 mm and 59 g/pot at 18 mm. As a result of evaluating 50% selection of mantle length and weight on the mesh sizes, mantle length (mm) and weight (g) were 84.6 and 147.8 in 22 mm, followed by 20 and 18 mm.

The objectives of this study were to develop the optimal structures of recirculating aquaculture tank for improving the removal efficiency of solid materials and maintaining water quality conditions. Flow analysis was performed using the CFD (computational fluid dynamics) method to understand the hydrodynamic characteristics of the circular tank according to the angle of inclination in the tank bottom (0°, 1.5° and 3°), circulating water inflow method (underwater, horizontal nozzle, vertical nozzle and combination nozzle) and the number of inlets. As the angle in tank bottom increased, the vortex inside the tank decreased, resulting in a constant flow. In the case of the vertical nozzle type, the eddy flow in the tank was greatly improved. The vertical nozzle type showed excellent flow such as constant flow velocity distribution and uniform streamline. The combination nozzle type also showed an internal spiral flow, but the vortex reduction effect was less than the vertical nozzle type. As the number of inlets in the tank increased, problems such as speed reduction were compensated, resulting in uniform fluid flow.

The objective of this study is to develop education programs for cultivating smart aquaculture experts through a education demand survey of industries, high school students, university (graduate) students and field workers. The industry demand analysis was conducted as an in-depth interview on representives from seven companies. Education demand surveys were conducted on 96 students and field workers in the Jeonnam region. Results on the demand survey were analyzed using frequency analysis and cross-analysis. The company representatives responded that they want to participated in internship and retraining programs to proactively secure manpowers with convergence capabilities about smart aquaculture. Seven companies preferred manpowers with basic competencies on ICT (Information and Communications Technologies) or aquaculture. The most respondents in the demand survey want to participate in the education program for experience on advanced technology, self-development and enhancement of work capability. On the other hand, some respondents said that the education is time-consuming and that the education program does not fit their level. Thus, the education program should be developed in a way to minimize the spatial and temporal limitations of education targets and to improve understanding of non-majors by reflecting the demands of human resources in the industrial field.

Background: Backward walking exercise may offer some unique and potentially beneficial differences compared with forward walking exercise. There is still a lack of research on backward walking exercises and forward head posture. Objects: The purpose of this study was to determine the effect of backward walking exercise on college students forward head posture in their 20s. Methods: Twenty-one subjects participated in the experiment. The subjects were those with a craniovertebral angle (CVA) of 55 degrees or less who understood the purpose and method of this study and voluntarily agreed. A camera capable of taking pictures of the lateral plane was installed at a distance of 1.5 meters before exercising. Pictures were taken before walking backward, and after walking for 15 minutes on the treadmill, the images were taken in the same way. The composition of the backward walking exercise was walking at a rate of 1.0 for 5 minutes, and the remaining 10 minutes were walking at a rate of 1.5. Wilcoxon signed rank test was used to compare CVA and craniorotational angle (CRA) before and after exercise. Results: As a result of this study, there was a significant difference in CVA before and after exercise (p < 0.05). There was a significant difference in CRA before and after exercise (p < 0.05). Conclusion: The backward walking exercise and verbal command seems to have positively influenced the changes in CVA and CRA among college students in their 20s. It seems that studies to confirm balance or muscle activity as well as changes in forward head posture through the long-term intervention of the backward walking exercise should be conducted.

Background: Posterior shoulder tightness, which is a problem mainly seen in patients with shoulder impingement syndrome, disrupts the scapulohumeral rhythm between the humerus and scapulae. Objects: The aim of this study was to compare the effects of joint mobilization and stretching on shoulder muscle activity and internal rotation range of motion (ROM) of the glenohumeral joint in patients with impingement syndrome with posterior shoulder tightness. Methods: The research subjects included 22 in-patients with impingement syndrome with posterior shoulder tightness. They were randomly divided into two groups: one group (12 patients) was treated with joint mobilization and the other group (10 patients) was treated with stretching for the posterior shoulder tightness. Each treatment was performed five times a week for two weeks, and there were 15 sessions for each treatment. The ROM of the internal rotation and muscle activities of shoulder joint were evaluated pretest and posttest in each group. Electromyography data were collected from the upper, middle, and lower trapezius and serratus anterior during shoulder abduction of 90°, 120°, and 150°. Results: Both the joint mobilization and stretching groups showed significant decreases in muscle activity in the upper, middle, and lower trapezius on the posttest (p < 0.05). There was a significant difference in serratus anterior at 150° (p < 0.05), but there was no significant difference between group in post-hoc analysis (p > 0.025). The internal rotation ROM was significantly increased in the stretching group compared to that in the joint mobilization group (p < 0.025). Conclusion: This study found that both joint mobilization and stretching for posterior shoulder tightness were effective in muscle activity during arm abduction, also in order to increase internal rotation ROM of shoulder joint, stretching was effective in patients with impingement syndrome with posterior tightness.