기계 중심의 자동차에 전기/전자 부품의 장착이 증가함에 따라 자동차 내 전기/전자(EE) 시스템에 대한 기능 안전 설계 요구가 대두되고 있다. IEC 61508 국제 표준은 모든 종류의 산업에 적용 가능한 기본적인 기능 안전 표준으로 작성되었다. 자동차 분야에서는 ISO 26262가 특화된 기능 안전 표준으 로 적용되고 있다. ISO 26262는 자동차의 기술적 복잡도 증가, 소프트웨어 내용 및 메카트로닉스 증가 추세와 함께 시스템적 고장(systematic failure)과 하드웨어의 우발 고장(random hardware failure)에 의한 리스크를 방지하기 위한 지침을 포함하고 있다. ISO 26262는 자동차 안전 수명 주기(관리, 개념, 시스템 개발, 하드웨어 개발, 소프트웨어 개발, 생산, 운용, 서비스, 폐기)를 제공하고, 각수명 주기 단계 별 필요한 안전 지침을 제공하고 있다. 최근 자율주행 차량(automatic driving) 및 전기자동차모빌 리티(e-mobility) 등에 대한 전 세계적 관심이 증가하고 이에 따른 기능 안전 설계의 중요성이 더욱 증가하는 시점에서 자동차 기능 안전에 대한 올바른 개념 이해는 자동차의 안전 설계를 넘어 자동차의 사용성 및 사용자 경험을 높이기 위한 기반을 마련하는 데 필수적이라 할 수 있다. 본 발표를 통해 자동차 안전 설계 개념을 이해하고, 안전 설계를 지원하고 보장하기 위한 아이디어를 제공하기를 기대한다.

The proportion of software in the automotive industry is steadily increasing due to the rapid technological development of automobile E/E parts. Because the automotive E/E technology is now on the basis of intelligent automobile and advanced safety automobile technology. The purpose of this study is to investigate the effect of organizational capability (organizational resource capability and management capability), process capability (process capability, customer Requirement management capability), performance dimension (motivation, participation level). In this study, we conducted questionnaires and statistical analysis on engineers (members of the Korea Advanced Automotive Technology Association) who perform research and development activities in the R&D organization of the automotive E/E part in South Korea. ANOVA is applied for the verification of the difference in performance measured by organizational capability, process maturity, and motivation participation level according to company characteristics (level of processing : supply chain configuration, annual sales, total SW development ratio). According to the results of this study, in order to improve the performance of ASPICE or ISO 26262-related consulting project, a different consulting approach strategy considering the characteristics of organization and personnel is needed. In summary, the analysis results for the three main treatment levels are as follows. The difference in organizational capacity, process capability and performance was found to be statistically significant according to supply chain configuration and annual sales, but it was found that the difference of response according to the proportion of total SW was not significant.

The purpose of this study is to investigate the effect of the characteristics of the company or the characteristics of the project participants on the process quality of automotive parts development. In this study, an empirical study was conducted on more than 50 researchers who participated in the development of automotive electric/electronic parts. As a result, it was statistically verified that the quality of the consulting project was significantly influenced by the characteristics of company or participants. According to the results of this study, in order to improve the performance of ASPICE or ISO 26262-related consulting project, a different consulting approach strategy considering the characteristics of organization and personnel is needed. In addition, this study suggests characteristics of process quality and its relevant consulting strategy according to supply chain configuration.

When the production run is short and process parameters change frequently, it is difficult to monitor the process using traditional control charts. In such a case, the coefficient of variation (CV) is very useful for monitoring the process variability. Th

When the production run is short and process parameters change frequently, it is difficult to monitor the process using traditional control charts. In such a case, the coefficient of variation (CV) is very useful for monitoring the process variability. The CV control chart is an effective tool to control the mean and variability of process simultaneously. The CV control chart, however, is not sensitive at small shifts in the magnitude of CV. The CV-EWMA(exponentially weighted moving average) control chart which was developed recently is effective in detecting a small shifts of CV. Since the CV-EWMA control chart scheme can be viewed as a weighted average of all past and current CV values, it is very sensitive to small change of mean and variability of the process. In this paper, we propose an FIR(Fast initial response) CV-EWMA control chart to improve the sensitivity of a CV-EWMA scheme at process start-up or out-of-control process. Moreover, we suggest the values of design parameters and show the results of the performance study of FIR CV-EWMA control chart by the use of average run length( ). Also, we compared the performance of FIR CV-EWMA control chart with that of the CV-EWMA control chart and we found that the CV-EWMA control chart gives longer in-control ARL and much shorter out-of-control ARL.

Complex products may present more than one type of defects and these defects are not always of equal severity‘ These defects are class ified according to their seriousness and effect on product quality and performance. So, demerit systems are very effecti

Complex Products may present more than one type of defects and these defects are not always of equal severity. These defects are classified according to their seriousness and effect on product quality and performance. Demerit systems are very effective sy

The control chart is widely used statistical process control(SPC) tool that searches for assignable cause of variation and detects any change of process. Generally, ？맴詠？ control chart and ？맴詠？ are most frequently used. When the production run is short and

  Recently, the control chart is developed for monitoring processes with normal short production runs by the coefficient of variation(CV) characteristic for a normal distribution. This control chart does not work well in non-normal short production runs.

Recently we developed the eZ Six Sigma software for education of Hanyang University in 2004. This eZ Six Sigma software focused on educational parts. In this paper, we present introduction and Contents of this Software. This software will be helpful to improvement of Six Sigma educational environment.

Recently we developed the eZ Six Sigma software for education of Hanyang University in 2004. This eZ Six Sigma software focused on educational parts. In this paper, we present introduction and Contents of this Software. This software will be helpful to improvement of Six Sigma educational environment.

We developed the software named as Management Quality Renovation Software in 2002 as a government project supported by the Korean Standards Association. In this paper, we present our ways to help small and medium sized industries improve quality by Management Quality Renovation software.