In this study, factors analysis is performed for reducing friction in elevation motion of a large television stand over 50-inch. The first is a pipe type cross-section control for accurate position control of the piston rod. Here it was compared with the pipe type and labyrinth type orifice cross-section. The second study is for specification decision and volume compensation experiment as an apparatus for compensating of the volume of the cylinder is compressed as the volume of piston rod. Consequently, in the orifice cross section study between pipe type and labyrinth type through CAE and experimental consideration, cross section of labyrinth type orifice is preferred for reducing of friction. The result of total consideration in stability problem and performance of volume compensation for specification decision and volume compensation experiment is determined the final speculation of hollow rod φ8×φ4 and riveting system.

In this study, factors analysis is performed for reducing friction in elevation motion of a large television stand over 50-inch. The first is a pipe type cross-section control for accurate position control of the piston rod. Here, it was compared with the pipe type and labyrinth type orifice cross-section. The second study attempted to reduce the frictional force the gas seal lip technology. As the result of the first study, in the orifice cross section study between pipe type and labyrinth type through CAE and experimental consideration, cross section of labyrinth type orifice is preferred for reducing of friction. As the result of the second study, in the gas seal lip technology, the outer-inner diameter of φ20×φ8 in the test result of hollow rod is revealed more proper if the weight of 50 inch television assumed as 30kgf.

The measuring equipment capable of thermo measuring of wide range thermo range(0℃ ~ 160 0℃) will be developed in a high temperature and high pressure state. The developed technology is a combination of one measuring two different temperatures measured in the measuring to a high temperature as possible at a low temperature from thermocouple module(thermocouple) to develop an integrated measuring device capable of measuring the broadband. Also, to develop two or more guard module to ensure the water-tightness and durability of the device to develop in a vacuum or high pressure is applied to the one-piece measuring device.

In this paper, the damping force of MRF(Magneto-Rheological Fluid) damper using Bingham-plastic model is studied and the performance of quarter car model using this damper is numerically analyzed. As a control algorithm, the sky-hook control is used for its convenience and effectiveness. The transmissibility of sprung mass and unspung mass is compared to that with the conventional passive damper and the feasibility of MRF damper is evaluated. And the design concept of fail-safe MRF damper is suggested to provide the damping force of conventional passive damper level in the case of controller malfunction. The control current and damping force is analyzed passing over the harmonic bumper.