본 연구는 강섬유의 인장강도 및 형상비가 고강도 및 보통강도 강섬유보강 콘크리트(Steel fiber-reinforced concrete, SFRC)의 압축 및 휨 거동에 미치는 영향을 평가하기 위하여 실시되었다. 또한 본 연구에서는 가력속도에 따른 SFRC의 압축거동을 평가하였다. 이를 위해 총 4종류의 강섬유가 설계기준 압축강도 35 및 60 MPa급 SFRC에 각각 사용되었다. 압축거동 평가를 위해 지름 150 mm 및 높이 300 mm의 원주형 공시체를 사용하였으며, 단면 150×150 mm 및 지간 450 mm의 각주형 공시체를 사용하여 휨 거동 평가를 실시하였다. 실험결과 강섬유의 혼입은 콘크리트의 인성을 크게 향상시키는 것으로 나타났으며, 고강도 강섬유의 사용은 고강도 SFRC의 성능개선에 효과적인 것으로 나타났다. 아울러 본 연구에서는 SFRC의 휨 인성지수에 근거한 압축인성지수 산정기법을 제안하였다.

This paper describes the flexural characteristic of high strength steel fiber reinforced concrete (SFRC) prisms with different fiber tensile strength. All mixtures have specified compressive strength of 80 MPa and fiber volume fraction of 0.5% and 1.0%. In accordance with EN-14651, SFRC prisms were made and tested under bending loading. Test results indicated that steel fiber has no significant effects on compressive behavior of SFRC. However, flexural behavior of high strength SFRC was improved considerably with increase of fiber tensile strength.

본 연구에서는 프라이머 도포 여·부 및 압축강도수준 그리고 바닥 마감재 시공재령에 따른 주차장용 바닥 마감재 부착성능을 평가 하였다. 또한 현행 KS 기준에서는 바닥 마감재 부착성능을 모르타르 공시체를 활용하여 평가하도록 제안하고 있지만, 실제 현장에서 바닥 마 감재는 콘크리트 상부면에 시공되기 때문에 바탕면 변화에 따른 부착성능을 추가변수로 계획하여 평가를 진행하였다. 모르타르는 현행기준에 서 제안하고 있는 배합표에 준하여 제작하였으며, 콘크리트 설계기준강도는 18, 30, 50 MPa로 계획하였다. 프라이머는 모르타르 및 콘크리트 재령 28일 변수에 따라 바닥 마감재와 함께 도포되었으며, KS 기준에 준하여 바닥 마감재 재령 일에 따라 부착성능을 평가하였다. 변수에 따른 부착성능 평가결과 바닥 마감재 재령이 경과함에 따라 바닥 마감재 부착성능은 향상되는 것으로 나타났으며, 압축강도가 높아짐에 따라 바닥 마감재 부착성능 또한 향상되는 것으로 나타났다. 이는 파괴양상을 고려하였을 때 콘크리트 쪼갬 인장강도의 영향을 받은 것으로 판단된다. 프 라이머 도포에 따른 부착성능은 유사한 것으로 나타났으며, 프라이머의 사용은 부착강도에 문제없이 콘크리트 표면의 내구성을 향상시킬 수 있을 것으로 판단된다. 또한 콘크리트 및 모르타르 바탕면의 부착강도 특성을 비교한 결과 바닥재의 부착강도는 구성재료 보다 압축강도에 큰 영향을 받는 것으로 나타났다. 따라서 현행 KS 기준의 모르타르 바탕면 실험체의 부착강도를 근거로 실제현장의 부착강도를 예측할 수 있을 것으로 판단된다.

This paper provides the flexural test results of steel fiber reinforced concrete (SFRC) prisms with different aspect ratios of steel fibers (60 and 67). All mixtures have specific compressive strength of 40 MPa and steel fiber volume fraction of 0.75%. According to ASTM C 1609 and EN-14651, SFRC prisms with 150×150×550 mm were made and tested under bending loading. Test results indicated that the aspect ratio of hooked-end steel fibers has insignificant effect on the first-cracking strength and flexural behavior of SFRC prisms.

This paper presents the flexural test results of steel fiber reinforced concrete (SFRC) prisms with different lengths of steel fibers. The specified compressive strength of SFRC is 40 MPa. Two types of steel fiber used in this study have lengths (0.5 and 0.9mm). Test results indicated that steel fibers with longer length is more effective to improve the flexural performance of concrete prisms than steel fibers with shorter length.

This paper examines the effect of steel fiber volume fraction on compressive and flexural properties of high-strength concrete with compressive strength of 40 MPa. The fiber volume fractions used in this study consist of 0.5, 0.75 and 1.0%. The prisms with 150x150x550 mm were made and tested in accordance with EN-14651.

This paper describes the experimental results for the structural performance of full-scale coupling beams with different reinforcement layout (diagonal and horizontal). For the reinforcements of the coupling beams, high-strength steel bars(SD500 and SD600) were used in order to improve workability and economic feasibility. The rigid steel frames and linked joints were used to maintain the clear span length (distance between both shear walls) of the coupling beam during the cyclic loading. Experimental results indicated that the diagonally reinforced coupling beam specimen could exhibit more ductile behavior compared to horizontally reinforced specimen. ACI318-14 code is applicable to design of coupling beam with diagonally reinforcement, however, that is overestimating the strength of horizontally reinforced coupling beam. It is remarkable that effective elastic stiffness values of both reinforcement details coupling beam significantly lees than ASCE 41-13.

This paper provides the flexural test results of steel fiber reinforced concrete (SFRC) prisms with different aspect ratios of steel fibers (60 and 67). All mixtures have specific compressive strength of 40 MPa and steel fiber volume fraction of 0.75%. According to ASTM C 1609 and EN-14651, SFRC prisms with 150×150×550 mm were made and tested under bending loading. Test results indicated that the aspect ratio of hooked-end steel fibers has insignificant effect on the first-cracking strength and flexural behavior of SFRC prisms.

This paper presents the flexural test results of steel fiber reinforced concrete (SFRC) prisms with different lengths of steel fibers. The specified compressive strength of SFRC is 40 MPa. Two types of steel fiber used in this study have lengths (0.5 and 0.9mm). Test results indicated that steel fibers with longer length is more effective to improve the flexural performance of concrete prisms than steel fibers with shorter length.

This paper describes the effects of tensile strength and aspect ratio of steel fiber on flexural behavior of high-strength SFRC notched beam. Test results indicated that flexural properties of SFRC improved with increasing in aspect ratio and tensile strength of steel fiber.

This paper describes adhesive performance of between concrete and surface-material with different compressive strength and HPP (High Performance Polymer). To measure adhesive strength between concrete and surface-material flexural specimen(100×100×400 mm) with HPP were made and tested. The test result indicated that HPP was effective on low compressive strength than high compressive strength.

This paper describes the structural performance of coupling beam with diagonal steel tube for reinforcement detail simplification of RC coupling beam. Two coupling beams were made and tested to compare the structural performance of coupling beam with diagonal steel bar and that with diagonal steel tube.