실험에서는 스틸밴드로 외부보강된 철근콘크리트 부재의 부착강도에 관한 연구를 진행하였으며 총 9개의 실험체를 제작하여 인발 실험을 실시하였다.실험결과 스틸밴드의 수와 초기응력의 증가에 따라 부착강도는 증가하는 것으로 나타났다. 이것은 스틸밴드에 의해 가해지는 긴장력으로부터 철근과 콘크리트간 횡방향에 의한 구속력 증가로 판단된다. 변수로한 실험결과들을 통하여 스틸밴드로 외부보강된 철근콘크리트 부재에 관한 부착강도 산정식을 검토하였다.

This study targets the development of technologies of reclaimed noise blocking engineering to improve endurance which may unify noise-blocking construction against noise and vibration and earthquake-preventive construction during rebuilding. This paper is to find the validity of construction methodology with RC beam additional materials to apply to slab and walls.

In this Study, the dynamic movement of concrete bounded by steel-band on reinforced-concrete column the external sides of which were reinforced by steel band has been evaluated as a case of post-tension engineering. Total five different experimental objectives were made and the rate of deformation of each binding concrete depending on different binding power forced to steel-band and locations of primary roots and different interval distances between reinforcing materials been checked.

In this Study, Manufacturing 9 Specimens objects for the experiment, the attaching strength between concrete and each reinforcing rod has been reviewed with variables like the different binding effect depending on the number of primary root, concrete-installing direction, location of primary root, and binding power loaded to steel band. The last destructed phase of experimented objectives and their attaching strengths between concrete and reinforcing rod have been evaluated.

FRP has higher design tensile strength than steel bar and outstanding characteristics such as light-weight, non-corrosion, and lower conductivity. And, current researchers evaluated flexural performances of flexural members using FRP and suggested the development length and splice length by using bonding failure test. This Researchers has the main purpose to examine the quality of bonding failure in the lap spliced FRP and deformed bar. Variables in this test with total 208 specimens planned are re-bar location, embedment length, covering depth, re-bar diameter. And, this study describes the result of our review on the bonding strength of the lap-spliced FRP and the deformed bar located at the bottom.