This study examined the effectiveness of the slip-resistance bars on the shear strength and slip displacement components of squat heavyweight concrete (HWC) shear walls with construction joints at the base interface. For the slip-resistance bars, X-, W-, and Ω-shaped bars were arranged at the base interface. W-shaped bars were more effective than the other bars in reducing the slip displacement at the base interface, in particular at the high inelastic level of the drift ratio of 2.0%.

This study examined the flexural performance of hybrid steel beam-reinforced concrete beam systems with a relatively simple and ductile connection. Test results showed that the flexural strength of the hybrid beams can be conservatively predicted using the equivalent stress block derived in the ACI 318-14 provisions. The dowel bars arranged within the connection were effective in enhancing the ductility of the hybrid beams.

This study tested two RC columns with 500 mm square section under the constant axial loading and cyclic lateral loadings to examine the effectiveness of supplementary V-ties in enhancing the ductility of columns. The displacement ductility ratio of V-tie column was 1.5 times higher than that of the companion cross-tie columns.

This study was examined to the shear friction applied compressive stress at construction joint and monolithic joint with or without transverse reinforcement. The analysis of test results were compared with ACI 318 code. The reduction ratio of the shear friction strength regardless of construction joint were similar with ACI 318 code. The relative slip amount at the peak of shear stress on the all of the specimens was increased about 33% by the transverse reinforcement.

The purpose of this study was to evaluate the sulfate attack of ternary blended concrete based on low-heat cement for reducing the heat of hydration. The main parameters were water-to-binder ratio and curing temperature on the matching mixtures. Test results revealed that compressive strength ratio at each age was superior to the developed mixtures than control mixtures. Whereas, the mass change ratio was superior to the control mixture at all ages.

This study was to analysis the hydration heat and crack index considering the buttress part of the basic nuclear containment walls. The maximum hydration heat of buttress part was higher about 6% than those conventional containment wall. Also, early crack index of buttress part by hydration heat was decreased about 26% than conventional containment wall. Whereas the crack index by external restraint were similar on the all of specimens.

Preliminary tests confirmed that the addition of nanoscale composites possess significant potential to provide mortars with purification properties.

This study was evaluated of flexure strength and ductility of a V-tie arrangement method in reinforced concrete columns under a variable axial force. The axial load level varied to be 0.25, 0.4, and 0.55 for columns with V-ties or crossties. As compared with displacement ductility ratio and the work damage indicator of the companion crosstie columns, the V-tie columns had higher value as much as 1.5 times, 5.2 times for the axial load level of 0.55, respectively.

This study was experimented direct shear strength of normal-weight and heavyweight concrete considering transverse reinforcement type(Vertical and X Type). The test results showed that the direct shear strength of heavyweight concrete was 20% higher than normal-weight concrete. also, direct shear strength of transverse reinforcement was effective at least 1.47 times regardless of the type of concrete.

The purpose of this study was to evaluate the shrinkage of ternary blended concrete based on low-heat cement for reducing the heat of hydration. The main parameters were water-to-binder ratio and curing temperature(5, 20, 40℃). Test results showed that the shrinkage significantly was influenced by water-to-binder ratio than binder type. The shrinkage strain of all of the mixtures was increased with increasing the curing temperature.

This study analyzed the temperature rise and thermal cracking in the nuclear containment structures owing to the hydration heat of cementitious materials. The main parameters investigated were the one-layer casting height of concrete to examine the shortening of construction time of the structures. The current mixture proportions of concrete needs to be modified to increase the one-layer height of concrete, minimizing the likelihood of the occurrence of thermal cracks.

The objective of this study is to evaluate the location of a failure surface generatrix and the punching shear strength of hollow plat slabs. The main test parameters was the location of a starting position of hollow materials that varied between 1d and 3d, where d is effective depth of slab section. Based on test results, the starting position of hollow materials in plat slabs is recommended to be more than 2d to avoid the reduction of concrete punching shear strength.

To examine the in-place strength development of concrete of nuclear containment structures with the wall thickness of 1200 mm, mock-up wall specimens were prepared. For maturity evaluation, the temperature rise in the wall specimens owing to hydration heat of cementitious materials was also measured. The in-place strength of concrete was measured using core specimens collected at different locations of mock-up walls. Test results showed that in-place compressive strength development was 1.5 times higher than the strength measured from the standard cylinders. This indicates the maturity effect is needed to be considered in predicting the compressive strength development of concrete in mass structures.

이 연구의 목적은 다양한 혼화재의 치환과 양생온도를 고려한 콘크리트의 압축강도 발현을 평가할 수 있는 단순모델의 제시이다. 이를위해 ACI 209의 포물선 식을 성숙도 함수를 기반으로 하여 수정하였으며, 압축강도 발현 상수 A, B 그리고 재령 28일 압축강도는 264개의 기존 실험결과들의 회귀분석으로부터 결정하였다. 제시된 모델의 검증을 위하여 혼화재 치환과 양생온도를 변수로 3그룹의 실험을 수행하였다. 콘크리트의 28일 압축강도는 양생온도가 표준양생온도(20도시)보다 높을수록 또는 낮을수록 감소하였다. 초기 재령3일동안 표준온도에서 양생을 한 콘크리트의 압축강도 발현은 그 이후 양생온도 변화에 영향을 거의 받지 않았다. 제안된 모델의 예측값과 실험값의 비의평균과 표준편차는 각각 1.00와 0.08로서 실험결과와 잘 일치하였다.

본 연구의 목적은 경계요소를 갖는 철근콘크리트 전단벽의 잠재소성힌지길이를 합리적으로 평가할 수 있는 단순모델의 제시이다. 전단벽의 높이에 따른 이상화된 곡률분포로부터, 기본방정식은 항복모멘트와 최대모멘트 그리고 사인장균열에 의한 부가모멘트의 함수로 일반화되었다. 전단벽의 항복모멘트와 최대모멘트는 변형률 적합조건과 힘의 평형조건을 기반하여 산정하였다. 사인장균열 발생의 여부는 ACI 318-11에서 제시된 콘크리트의 전단력으로부터 검토되었으며, 부가모멘트는 Park and Paulay에 의해 제시된 트러스기구를 이용하여 산정하였다. 이들 모멘트식들은 다양한 변수범위에서 변수연구를 수행하였다. 결과적으로 등가소성힌지길이는 주철근 및 수직철근지수와 축력지수의 함수로 제시될 수 있었다. 제시된 등가소성힌지길이의 모델은 실험결과의 비교에서 평균 및 표준편차가 각각 1.019와 0.102로 실험결과를 정확하게 예측하였다.

The objective of this study is to evaluate shrinkage of heavy weight concrete. The main parameter was replacement level of fly-ash. Test results showed that shrinkage of heavy weight concrete was higher than ACI 209 and CEB-FIP codes without replacement of fly-ash in early ages. However, in fly ash substitution rate of 20% case, shrinkage of heavey weight concrete was lower than ACI 209 and CEB-FIP codes after 35 days.

This present study proposes a practical strengthening technique for enhancing the in-plane shear strength and ductility of unreinforced masonry walls using the unbonded prestressed wire ropes. Four full-scale masonry walls were tested under constant axial load and cyclic lateral loads. Test results revealed that the developed strengthening procedure was highly effective in enhancing the in-plane shear strength and ductility of masonry walls and controlling crack propagation along head and bed mortar joints

Girder type modular bridge requires using ductile fiber reinforced concrete slab(link slab) structure to connect each girder modules at interior support points. This study presents the results of experimental evaluation on the properties and fracture energy of ductile fiber reinforced concrete for jointless modular bridge.

본 연구에서는 경량 콘크리트에 대한 361개, 보통중량 콘크리트에 대한 1,335개 및 고중량 콘크리트에 대한 221개의 데이터를 이용하여 콘크리트의 인장강도 (직접인장강도, 쪼갬인장강도 및 파괴계수)에 대한 설계기준과 기존 연구자들의 제안모델의 안정성을 평가하였다. 콘크리트 인장강도 예측을 위한 대부분의 제안 식들은 보통중량 콘크리트의 실험결과를 이용하여 압축강도의 함수로서 제시되었다. 하지만 데이터베이스의 분석은 콘크리트 인장강도는 기건 단위질량에 의해서도 중요한 영향을 받음을 보여준다. 이에 따라, 콘크리트 인장강도에 대한 기준 및 제안모델들은 기건 단위질량 2,100 kg/m3 이하, 압축강도 50 MPa 이상에서는 실험결과와의 불일치가 증가하였다. 한편, 본 연구에서 콘크리트 기건 단위질량을 고려하여 제시된 콘크리트 인장강도 예측 모델들은 실험결과와 비교적 잘 일치하였다.

와이어로프와 T형 강판을 이용한 비부착공법의 내진성능을 평가하기 위해 중심 축하중과 반복 횡하중을 받는 5개의 보강된 기둥과 무보강 기둥을 실험하였다. 주요 변수는 T형 강판의 정착방법과 피복 모르터의 유․무이다. 실험결과 T형 강판이 정착된 기둥의 하중분배로 인한 휨 내력 및 연성 증가를 확인할 수 있었다. 그러나 T형 강판이 정착되지 않은 기둥은 연성 증가에는 효과적이지만 T형 강판으로 하중이 분배되지 않았다. 피복 모르터가 있는 보강된 기둥은 효과적인 초기 강성 및 휨 내력 증가를 보였지만 연성증가에는 불리하였다. 단면분할법을 이용해 예측한 보강된 기둥의 최대 휨 내력은 등가응력블럭을 사용하여 예측한 ACI 318-05 기준보다 실험결과를 예측하였다.