본 연구는 국내에서 실내 관상용으로 많이 활용되는 스킨답 서스의 실내재배 시 적정 인공광원, 수경재배 전기전도도 농 도 및 용토를 선발하기 위하여 수행하였다. 실내재배 시 인공 광원은 형광등, 적청 LED, 백색 LED로 처리하였다. 수경재배 시 양액 농도는 EC 1.2, 1.6, 2.0ds·m-1 수준으로 하였고, 재 배용토는 제올라이트, 코코피트, 펄라이트, 황토볼 4가지로 달리하였다. 스킨답서스의 실내 재배 시 줄기 길이는 형광등 과 적청 LED 처리보다 백색 LED 처리에서 길어졌다. 잎의 크기는 적청 LED 처리에서 형광등과 백색 LED 처리보다 커 지는 경향이었다. 엽록소 지수값은 백색 LED>적청 LED>형광 등 순으로 높았다. 수경재배 시 스킨답서스의 줄기길이는 EC 농도가 높아질수록 길어지는 경향이었고, 용토별로 비교하면 제올라이트와 코코피트에서 높은 경향이었다. 엽록소 지수값 도 EC 농도와 비례하여 높아졌고, 용토별로는 제올라이트와 코코피트에서 높았다. 스킨답서스의 생체중도 EC 농도가 높 을수록 높았고, 제올라이트와 코코피트에 높은 경향이었다. 상기 결과들을 종합할 때, 스킨답서스의 NFT를 이용한 실내 재배 시 적정 인공광원으로는 백색 LED를, 수경재배 양액의 농도는 EC 1.6∼2.0ds·m-1를, 그리고 NFT 용토는 제올라이 트나 코코피트가 적합하다는 것을 알 수 있었다.

Methyl bromide (MB) has been still routinely used in quarantine fumigation on imported citrus, although there had been issuing chronic inhalation toxicity to fumigators and related workers as well as phytotoxic damages after fumigation. Ethyl formate (EF), is the only option to replace MB in terms of its safety for consumers (food additive and naturally occurred) and worker with higher threshold level limit (TLV = 100 ppm). Its application technology also provide cost effectiveness, good commercial practice in terms of application time (< 10 min) for 40 ft container. The replacement of MB with EF is recommended not to fumigate with hazardous and phasing-out MB on imported oranges.

농업용 무인멀티콥터를 활용한 방제면적은 수도작은 물론 밭작물에서도 방제 범위가 확대되고 있다. 밭작물은 작물의 형태가 다양하여 비행속도, 살포높이 등을 최적화하는 연구가 필요하다. 본 연구에서는 배추, 대파, 고추에서 발생하는 나방류에 대하여 무인멀티콥터의 살포 높이에 따른 방제효과를 확인하였다. 살포된 약제가 작물에 부착되는 정도를 조사한 결과, 배추는 2m, 대파는 3~4m, 고추는 모든 높이에서 비슷한 부착정도를 보였지만, 전체적으로 부착량이 적고 불균일 하였다. 살포 높이별 방제효과는 작물별로 각각 배추(9~10엽기)는 2m높이, 고추(약 1.2m)는 2~3m, 대파(약 60cm)는 2, 3, 4m 각각 비등한 방제효과를 보였다. 각각의 작물모두 경엽처리 대비 약효가 미흡하였으며, 고추는 4m높이 살포시 방제효과가 현저히 낮았다.

In this study, poly(amic acid) was prepared via a polycondensation reaction of 3,3'-dihydroxybenzidine and pyromellitic dianhydride in an N-methyl-2-pyrrolidone solution; reduced graphene oxide/polybenzoxazole (r-GO/PBO) composite films, which significantly increased the electrical conductivity, were successfully fabricated. GO was prepared from graphite using Brodie's method. The GO was used as nanofillers for the preparation of r-GO/PBO composites through an in situ polymerization. The addition of 50 wt% GO led to a significant increase in the electrical conductivity of the composite films by more than sixteen orders of magnitude compared with that of pure PBO films as a result of the electrical percolation networks in the r-GO during the thermal treatment at various temperatures within the films.

To perform imaging observations of optically red objects such as high redshift quasars and brown dwarfs, the Center for the Exploration of the Origin of the Universe (CEOU) recently developed an optical CCD camera, Camera for QUasars in EArly uNiverse (CQUEAN), which is sensitive at 0.7-1.1 μm. To enable observations with long exposures, we develop an auto-guiding system for CQUEAN. This system consists of an off-axis mirror, a baffle, a CCD camera, a motor and a differential decelerator. To increase the number of available guiding stars, we design a rotating mechanism for the off-axis guiding camera. The guiding field can be scanned along the 10 arcmin ring offset from the optical axis of the telescope. Combined with the auto-guiding software of the McDonald Observatory, we confirm that a stable image can be obtained with an exposure time as long as 1200 seconds.

A new embryonic cell line (OFEC-17FEN) derived from olive flounder Paralichthys olivaceus was developed. OFEC-17FEN cells were subcultured for <30 passages over ~200 days. OFEC-17FEN cells had a doubling time of 114.34 h and modal diploid chromosome number was 48. The pluripotency genes POU5f1 and NANOG were expressed in OFEC-17FEN cells. However, the lack of several pluripotency-related genes expression indicates that OFEC-17FEN cells are not stem cells. OFEC-17FEN cells transfected with plasmid pEGFP-c1 exhibited a strong green fluorescent signal at 48 h after transfection. Accordingly, OFEC-17FEN cells may be useful for both basic research and biotechnological application.

Background : Bai Zhu (Atractylodes macrocephala Koidz.) has been generally harvested in 1-2 years after seedstock planting. Recently, seed is used increasingly for planting in spring and rhizome is harvested in 1 year. In 1 year open field culture, seed harvesting rate is low below 30% and supply and demand of seed is so hard. This study was carried out to improve seed harvesting for stable seed supply and demand in Atractylodes macrocephala Methods and Results : Seed of Atractylodes macrocephala Koidzumi was directly sown in open field, under tunnel and rain shielding condition in mid-April. Tunnel was installed from prebloom, mid-september to seed harvesting time, November using 240 ㎝ wires for 120 ㎝ by interval and 20 ㎝ by height in furrow to assure insect pollination and wind fertilization. In rain shielding condition, plant height was highest as 38.2 ㎝ and number of branches, number of nodes, and content of chlorophyll were higher as 7.8 ea/plant, 8.7 ea/plant, and 65.4 respectively compared to open field and under tunnel. Flowering time was earliest as 23rd September in rain shielding condition and in open field and under tunnel was 26th September. There is no blossom rot in rain shielding condition while blossom rot occurrence was highest in open field by 5 in degree. Seed setting rate was highest as 42.0% in tunnel cultivation and seed weight per plant and 1,000 seed weight were highest as 3.7 g/plant and 22.3 g respectively. Total seed yield was higher as 58% and 65% in tunnel and rain shield condition respectively compared to 29 ㎏/10 a of open field. Tunnel cultivation for seed production of Atractylodes macrocephala is more beneficial for lower installation cost. Conclusion : Tunnel cultivation for seed production of Atractylodes macrocephala is more beneficial due to low blossom rot degree by 1, higher 1,000 seed weight and seed setting rate as 19.0 g and 42%, increased seed yield, and lower installation cost.

Background : In the year 2015, the area under rhizome of Rehmannia glutinosa in Chungnam province increased to 65% (105 ha) of domestic total cutivation area and is recognized as income crop. Since proper strorage method of rhizome has not been established, rhizome decay rate is so high during storage. This experiment was carried out to establish proper strorage method for stable production of rhizome of Rehmannia glutinosa Methods and Results : Korea jiwhang was used for this experiment and rhizome was cured under vinyl house and room temperature for 1, 2, 3 days respectively. Rhizome was stored for 140 days at –2 - 0℃ after curing, and rhizome quality and saprogen were investigated after storage. Trimming loss was 11.3 - 21.9%, higher in longer curig time and rice hull packing. Moisture content was 70.0 - 75.1%, higher in shorter curing time and no rice hull packing. Curing efficacy was better in vinyl house than room temperature, decay rate by weight and number of rhizome was lowest in 48hrs curing and no hull packing as 0.5% and 2.0% respectively. Identified saprogen during storage was Fusarium oxysporum, Fusarium tricinctum, Penicillium verrucosum, Mucor racemosus. Conclusion : Curing efficacy was better in 48hrs treatment under vinyl house with lowest decay rate and rice hull packing increased decay rate considerd due to saprogen existing in rice hull. 4 saprogens including Fusarium oxysporum were identified during storage of rhizome.

Background : The effective components of Omija(Schisandra chinensis Bailllon) are lignans (schizandrins and gomisins), and this components were contented mostly in seed part on Omija, which have various physiological functionalities such as anti-cancer, anti-inflammatory, and antioxidant activities. Methods and Results : This study was carried out to determine effective condition(CO2, CO2+ethanol) on extraction using supercritical carbon dioxide extraction (SFE) system and to find interrelation on effective components and antioxidant activity of extracts and residues obtained after extraction. Effective components were analysed lignans and phenolic compounds and antioxidant activirty was determined for DPPH radical scavenging ability on methanol extracts of SFE-extract and SFE-residue. On SFE with ethanol, SFE extract was separated two phase, upper(water phase) and lower(oil phase). SFE-extract showed the highest total lignans content(61.36 mg/g, 72.14 mg/g on lower, 50.58 mg/g on upper) and the lowest total phenolic compounds(6.52 mg/100g) and SFE-residue showed the lowest total lignans content(1.45 mg/g) and the highest total phenolic compounds(16.23 mg/100g) by extracted on CO2+ethanol treatment. SFE-residue methanol extract showed the highest DPPH radical scavenging abilities and SFE-extract upper showed the lowest. Conclusion : Thus, this results showed SFE-extract showed the highest total lignans content, but SFE-residue showed the highest DPPH radical scavenging ability although the lowest total lignans content.

Background : Ginseng berry(GB) is useful not only just in growing source but also in functional food source. The ingredients of crops varies with the maturity. So, GB ingredients need to be analyse for optimal harvesting stage of GB against appropriate use. Methods and Results : This study was carried out to determine optimal harvesting stage of GB. GB was harvested 5 day periods from July 12, started harvesting when pollination was 50 days old, until August 1. GB was analysed color, ginsenosides and fatty acids using colorimeter, LC and GC, respectively. As the majority of GB increase, color of freeeze drying GB powder were changed that lightness and yellowness was increased, redness was decreased. Ginsenoside Re, Rb1 and Rb2, major ginsenoside in GB, were increased and Ginsenoside F1, Rk1 and Rg5, minor ginsenoside, were increased for a time and then decreased. Oleic acid, the main fatty acid in GB, was decreased, and linoleic acid and total fatty acid content was increased to July 27 and then decreased. Conclusion : Total ginsenosides content was the highest on August 1 and total fatty acid content was the highest July 27. As the majority of GB increase, ratio of oleic acid on total fatty acid was decreased and linoleic acid was increased. Thus, GB is that the longer a harvest period and the more useful for food source.

Background : According to medicinal plant standard culture, flower organ should be removed but there is no detail information on flower organ removal in Atractylodes macrocephala Koidzumi. This study was carried out to examine effect of flower organ removal on the increase of roots yield in Atractylodes macrocephala Koidzumi. Methods and Results : ○ Experiment variety : Atractylodes macrocephala Koidzumi. ○ Treatment : ① Flower organ non-cutting ② Flower organ cutting ○ Planting date : April, 2015/ April 25, 2016 ○ Planting distance : 30×20cm/ 30×15cm ○ Experiment place : Ginseng & Medicinal Plant Research Institute(Geumsan-gun, Chungcheongnam-do) Conclusion : The fresh rhizome yield of F. O. C. at a bud treatments were increased 21.0% ∼50.0% compare to F. O. N. C. treatments. The fresh rhizome yield of F. O. C. at a flower treatments were increased 17.4%∼34.6% compare to F. O. N. C. treatments. The fresh weight of above-ground parts of F. O. C. treatments were decreased 77.2%∼65.7% compare to F. O. N. C. treatments. F. O. C.(=Flower organ cutting) / F. O. N. C.(=Flower organ non-cutting).

This study describes results on sexual maturation and characteristics of natural spawned eggs to develop a method for the production of stable, healthy fertilized eggs from captive-reared yellowtail kingfish, Seriola lalandi. A total of 59 yellowtail kingfish were captured off the coast of Jeju Island, after which the broodstock was cultured in indoor culture tank (100 m3) until they were 6.1–14.9 kg in body weight. As part of the rearing management for induced sex maturation, the intensity of illumination was maintained at 130 lux. The photoperiod (light/dark; L/D) was set to a 12 L/12 D from October 2013 to January 2014, and 15 L/9 D from February 2014 to June 2014. Feeds comprised mainly EP (Extruded Pellets), with squid cuttlefish added for improvement of egg quality, and was given from April to June 2014. The first spawning of yellowtail kingfish occurred in May 3, 2014, at a water temperature of 17.0°C. Spawning continued until June 12, 2014, with the water temperature set at 20.5°C. Time of spawning was 26 times at this period. The total number of eggs that spawned during the spawning period was 4,449×103. The buoyant rate of spawning eggs and fertilization rate of buoyant eggs during the spawned period were 76.1% and 100%, respectively. The diameters of the egg and oil globule were 1.388 ± 0.041 mm and 0.378 ± 0.029 mm, respectively, which was higher in early eggs than in those from late during the spawned period.

This study monitored the morphological development of embryo, larvae and juvenile yellowtail kingfish, Seriola lalandi, for their aquaculture. The fertilized eggs obtained by natural spawning were spherical shape and buoyant. Fertilized eggs were transparent and had one oil globule in the yolk, with an egg diameter of 1.35 ± 0.04 mm and an oil globule diameter of 0.32 ± 0.02 mm. The fertilized eggs hatched 67–75 h after fertilization in water at 20 ± 0.5°C. The total length (TL) of the hatched larvae was 3.62 ± 0.16 mm. During hatching, the larvae, with their mouth and anus not yet opened. The yolk was completely absorbed 3 days after hatching (DAH), while the TL of post-larvae was 4.72 ± 0.07 mm. At 40 DAH, the juveniles had grown to 30.44 ± 4.07 mm in TL, body depth increased, the body color changed to a black, yellow, and light gray-blue color, and 3–4 vertical stripes appeared. At 45 DAH, the juveniles were 38.67 ± 5.65 mm in TL and 10.10 ± 0.94 mm in body depth. The fish were green with a light orange color, with 7 faint green-brown stripes on the sides of their body. At 87 DAH, the juveniles had grown to 236.11 mm in TL, 217.68 mm in fork length, and 136.5 g in weight. The fish resembled their adult form, with a light yellow-green body color, loss of the pattern on the sides of their body, and a yellow coloration at the tip of the caudal fin.

Background : Jiwhang (Rehmannia glutinosa L.) cultivation area of chungnam province was 62ha(219 farms, 53.9% of domestic cultivation area, M.A.F.R.A. 20142)). Recently, jiwhang is rapidly spread to 150ha ( Geumsan administration statistics, 2015) as taking place of income crop in Chungnam. High quality jiwhang GAP production and improvement of the distribution system including magnus customers, producer association fosterage and conventional market Vitalization were the reason of rapid cultivation area increase of Rehmannia glutinosa L. in Geumsan. This study was performed to set up the standard Rhizome size for planting in Rehmannia glutinosa L. Materials and Methods ○ Experiment variety : Togang ○ Treatment(rhizome length) : ① 1cm ② 2cm ③ 3cm ④ 4cm ⑤ 6cm(control) ○ Planting date : May 6, 2015 ○ Planting distance : 30×15cm ○ Experiment place : Ginseng and Medicinal Plant Research Institute (Geumsan-gun, Chungcheongnam-do) Conclusion : In the aboveground growth was no significant difference among treatments. In the root characteristics, there was no significant difference among treatments. Take a 1∼2cm rhizome planting saved rhizome amount and planting time to 73.8%∼64.3% and 68.4%∼ 57.8% respectively than 6cm(control).

Background : Generally, price of Jiwhang(Rehmannia glutinosa L.) is highest in August. In this study, Economic Evaluation and Productivity of 9 Jiwhang varieties w ere analyzed according to harvesting tim es of August and October. Materials and Methods ○ Experiment variety : Jiwhang 1, Korea jiwhang, Daegyung, Gogang, Togang, Dagang, Wongang, Hwanggang and Yeongang ○ Treatment : ①Initial-August harvest ②Mid-August harvest ③Ended-August harvest ④Ended-October harvest ○ Planting date : April 17, 2015 ○ Planting distance : 30×15cm ○ Experiment place : Ginseng and Medicinal Plant Research Institute (Geumsan-gun, Chungcheongnam-do) Conclusion : The higher roots yield at August harvest was in Gogang, Dagang and Togang. The lower roots yield at August harvest was in Korea jiwhang and Hwanggang. The higher economic feasibility at August harvest was in Gogang, Togang, Dagang and Wongang. The higher economic feasibility at ended-October harvest was in Gogang, Yeongang, Togang, Dagang and Wongang.

Background : According to medicinal plant standard culture, flower stalk should be removed at the stage of 4-5 main leaves appearance but there is no detail information on stalk removal in jiwhang (Rehmannia glutinosa L.). This study was carried out to examine effect of flower stalk removal on the increase of total yield in Rehmannia glutinosa L. Materials and Methods ○ Experiment variety : Korea jiwhang, Wongang ○ Treatment : ① Peduncle non-cutting ② Peduncle cutting ○ Planting date : April 18, 2015 ○ Planting distance : 30×15cm ○ Experiment place : Ginseng and Medicinal Plant Research Institute (Geumsan-gun, Chungcheongnam-do) Conclusion : Aerial part growth was no significant difference according to treatments in Wongang and aerial weight was havier in Peduncle cutting than in Peduncle non-cutting. Aerial part growth was no significant difference according to treatments in Korea jiwhang. The roots yield in Korea jiwhang was increased about 5.2% in Peduncle cutting. The roots yield in Wongang was increased about 24.9% in Peduncle cutting.