This study aimed to develop the in vitro method using domestic commercial diets to estimate nutrient digestibility in dogs. The existing in vitro method were tested and compared with literature data to develop new in vitro method. The development of in vitro method progressed as follows: modification of pepsin solution to an activated form and supplementation with 1% lipase. All the in vitro method progressed to 4 hours of stomach simulation and 2 hours of small intestine simulation. In vivo digestibility was measured using the same diets as beagle dogs. The supplementation of lipase methods showed significantly improved (p < 0.05) DM, OM, and EE than the existing and modified pepsin solution methods. The correlation between in vitro and in vivo data in DM, OM, and EE digestibility was high (r2 = 0.889, 0.907, and 0.721, respectively), and the correlation between in vitro and in vivo data in CP and GE digestibility was medium (r2 = 0.681 and 0.536, respectively). The current in vitro method is similar to in vivo digestibility and helps potentially predict digestibility for dogs. In conclusion, this developed in vitro method suggests that it can help estimate the nutrient digestibility of dogs' diets without in vivo experiments.

국내 원예작물에서 화분매개곤충의 의존도는 해마다 증가하고 있다. 우리는 사과, 딸기 등 화분매개곤충의 의존도가 높은 주요 과수와 시설작물에 대하여 화분매개곤충의 사용기술을 개발하고 이를 현장에 적용하는 연구를 수행하고 있다. 2021년부터 2022년까지 딸기, 키위 등 5가지 주요 농작물에서 화분매개벌을 적용한 결과, 딸기에서 뒤영벌의 적용결과 기존 꿀벌과 통계적으로 같은 수준의 화분매개효과를 나타내었으며, 하우스에서 농약적용시 하우스 밖으로 벌통을 위치시키는 것이 방치보다 벌의 소실을 20% 더 감소시킬 수 있었다. 인공수분 에 의존하고 있는 씨없는 수박에서 수분수 식재와 꿀벌을 이용함으로 기존 벌 방사보다 16% 착과율을 향상시킬 수 있었다. 시설고추에서 꿀벌과 뒤영벌의 혼합사용시 기존 꿀벌 방사보다 고추 수량이 10% 향상되었고, 토마토 에서 660㎡당 뒤영벌의 봉군량을 1.5배 증가시 토마토 수량은 4.4% 향상되었다. 키위는 꿀벌로 기존의 인공수분 을 충분히 대체할 수 있었고, 인건비가 60%이상 절감되었다. 또한 현재 시판중인 30종의 살충제와 27종의 살균제 에 대하여 24시간내 반수치사를 보인 농약은 각각 살충제 6종와 살균제 4종 이었다. 이어서 2023년부터 참외, 멜론, 사과, 단감에 대한 현장적용연구가 진행되고 있다.

Bee traffic at the hive entrance can be used as an important indicator of foraging activity. We investigated patterns of honeybees and bumblebees near their hives as a basis for calculating bee traffic using the image deep learning. The flight pattern near the hive differed significantly according to bee at entering and leaving the hive. Honeybees mainly showed flight that changed flight direction more than once (69.5%), whereas bumblebees mainly performed straight flight (48.7%) or had a single turn (36.5%) in flight. When bees entered the hive, honeybees primarily showed one-turn or two-turn flight patterns(88.5%), and bumblebees showed a one-turn flight pattern (48.0%). In contrast, when leaving the hive, honeybees primarily showed a straight flight pattern (63.0%), and bumblebees primarily showed a straight or one-turn pattern (90.5%). There was a significant difference in flight speed according to the flight pattern. The speed of straight flight (0.89±0.47 m/s) was 1.5 to 2.1 times faster than flight where direction changed. Therefore, our results can help determine the capturing and recognizing the flying image of bees when calculating bee traffic by image deep learning.

시설재배 딸기의 화분매개에 꿀벌 사용이 보편화되어있지만 동양종(A. cerana) 꿀벌의 화분매개효과 연구는 미비한 실정이다. 따라서 본 연구는 딸기에서 동양종 꿀벌의 화분매개자로 가능성을 평가하기 위하여 비닐하우 스 딸기에서 서양종 꿀벌과 화분매개행동 특성을 비교하였다. 향후 봉군 수명과 착과된 딸기의 기형과율품질을 평가 할 예정이다. 서양종과 동양종 꿀벌은 10시 이후부터 활동량이 증가하고, 13시에 방화활동이 가장 활발하였 으며 이후부터 감소하는 일주행동 패턴을 보였다. 서양종과 동양종 꿀벌 활동성은 모두 온도, 조도, 자외선과 정의 상관관계를 나타냈으며 상대습도와는 부의 상관을 보였다. 특히 서양종 꿀벌은 온도, 조도, 자외선이 같은 수준의 상관(r=0.7)을 보이는 것에 반해, 동양종 꿀벌의 경우 온도와 습도보다 광조건(조도, 자외선)에서 더 높은 상관계수(r＞0.9)가 나타났다. 서양종과 동양종 꿀벌의 방화특성을 조사한 결과 꽃에 머무는 시간은 서양종 꿀벌 이 평균 6.9초, 동양종 꿀벌이 7.0초로 같은 수준이었으나(p>0.05), 꽃 간 이동시간은 동양종 꿀벌이 2.4초로 서양 종꿀벌(3.1초)보다 20% 유의미하게 짧은 것으로 나타났다(p=0.011). 따라서 같은 시간에 동양종 꿀벌이 서양종 꿀벌보다 더 많은 꽃을 방문 할 수 있을 것으로 생각된다.

The clearwing moth, Synanthedon bicingulata (Staudinger, 1887), is a pest that infests various species of cherry trees. However, genetic information regarding the genus Synanthedon including S. bicingulata, is limited. In this study, we sequenced a complete mitochondrial genome (mitogenome) of the species. The 16,255 bp of S. bicingulata mitogenome differs from the typical gene arrangement formed in Lepidoptera: trnQ-trnS2-trnM-trnI arrangement between the A+T-rich region and the ND2 junction. Moreover, the genome has untranslated repetitive sequences in the intergenic space between lrRNA and trnV, as well as the CGA start codon in COI and the TTG start codon in ATP8. Similar observations are noted in species belonging to the tribe Synanthedonini within the genus Synanthedon.

The two-spotted spider mite, Tetranychus urticae Koch, is one of the economically important agricultural pests globally, as it attacks a wide range of vegetable and horticultural crops. In this study, we evaluated spatial repellent and oviposition deterrent activities of T.urticae in response to fifteen compounds derived from ester-containing natural products. To evaluate the tests, we used bridge two-choice test and host two-choice test in laboratory conditions. Among the eight compounds showed spatial repellent and oviposition deterrent activities against T. urticae at the 20 mg dose and some compounds had the activities at lower dose. We also conducted two-choice test with a blend and single compounds to determine which showed stronger spatial repellent and oviposition deterrent activities. In host two-choice test, we evaluate repellence between distance of compounds. This study concluded that series compounds from ester-containing natural products have the potential to be used managing T. urticae in the field.

The series compounds from natural products are an effective repellent and deterrent against various kinds of pests. In this study, we evaluated the spatial repellency of fifteen compounds from natural products on the two-spotted spider mite, Tetranychus urticae Koch (Acari: Tetranychidae), in the laboratory and field by using two-choice and no-choice bioassays. In laboratory two-choice tests, six compounds displayed active spatial repellency against female adult mites at a 2mg dose. The repellency of each compound was also as effective as the 6-compound blend. Three of the six compounds showed the predominant repellent activity (over 90%) that lasted for at least 3 days in laboratory no-choice tests. In a field test, we found that the number of T. urticae was fewer in strawberry seeding treated lure with 2mg of these compounds than in strawberry seeding treated lure with solvent control. Given that the findings are efficacious, economical, and natural products, they can be used in the sustainable management of T. urticae in greenhouse.

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

The chemical composition of 86 species of native plants in Korea, including plants to be afforestation, was analyzed. The chemical composition of the species analyzed was different. The species with the highest extractable content was Viburnum dilatatum (3.91%), and the species with the lowest extractable content was Ligustrum lucidum (0.11%). The lignin content ranged from 12 to 39%, with an average of 25%. The species with the highest lignin content was Chaenomeles lagenaria (39.37%). Hemicellulose content ranged from 18 to 52%, with the highest species being Thuja occidentalis (51.22%) and Eucommia ulmoides (48.84%). Cellulose content ranged from 25 to 58%, and the species with the highest content were Prunus serrulata (57.67%), Diospyros kaki (57.14%), Aesculus turbinata (53.29%), Albizia julibrissin (53.02%), and Zelkova serrata (52.29%). The chemical composition was different for each use taxon of 86 plant species. The lignin content was the highest in the fruit group and the lowest in the group other than recommended species for afforestation. Cellulose content was highest in non-reforestation-recommended tree species and lowest in fruit trees. In classification according to tree height, lignin content was higher in shrubs than in tall trees, and cellulose content was highest in tall trees. Between deciduous and evergreen trees, the lignin content was high in deciduous trees (26.46%), and the cellulose content was also high in deciduous trees (44.01%). As a result of analyzing the correlation between each compound, there was a difference. There tended to be a positive correlation between extractives and lignin content. There was a negative correlation between extractives and holocellulose content, hemicellulose and cellulose. The higher extract content affected the cellulose content much more than hemicellulose. Also, the higher the lignin content, the lower the cellulose content. The species with low lignin content and high cellulose content were Diospyros kaki and Prunus serrulata var. spontanea. This result is expected to be primary data for bioenergy, pulp industry and bioindustry.

경상남도농업기술원 화훼연구소에서 2021년 화색이 연황 색이며 화심이 녹색인 미니 절화용 거베라 품종 ‘크림쿠키’ (Cream Cookie)를 육성하였다. ‘크림쿠키’ 품종은 2014년 황색 미니 ‘Sun City’를 모본으로, 백색 미니 ‘Blandy’를 부 본으로 인공교배를 실시하여 육성된 품종이다. 2021년까지 생육 및 개화 특성검정과 기호도 조사를 실시하였으며 ‘크림 쿠키’의 생육 및 개화특성을 대조품종인 ‘Sun City’와 비교하 였다. ‘크림쿠키’는 연황색(RHS 4C) 꽃잎과 녹색 화심을 가진 반겹꽃 거베라 품종이다. 화폭이 7.1cm인 작은 꽃이며, 화경 장은 58.9cm였다. 화경 직경은 상부 0.4cm, 하부 0.7cm 였 다. 외부설상화의 길이는 2.8cm이며 폭은 0.8cm였다. 개화 소요일수는 65.7일로 ‘Sun City’에 비하여 18.8일 빨랐으며, 첫 개화시 엽수는 22.4매였다. 연간 주당 절화수량은 102.3 본으로 ‘Sun City’의 82.0본에 비하여 20.3본이 많았다. 절 화수명은 17.8일로 ‘Sun City’보다 4.1일 더 길었다. ‘크림쿠 키’는 화폭이 7.1cm의 미니 품종으로 연간 주당 100본 이상 절화 생산이 가능하다. 또한 수확 후 꽃 캡 씌우기, 꽃목 보강 등 추가적인 작업을 생략할 수 있어 생산비 절감이 가능하므 로 농가보급 확대가 기대된다.

Nasopharyngeal stenosis is defined as a morphological transition of narrowing at the nasopharyngeal region. A 2-yearold, castrated male, Korean short hair cat was referred to the animal medical center, Gyeongsang National University. According to clinical signs, diagnostic imaging, and physical examination, nasopharyngeal stenosis was diagnosed. The staphylectomy was performed using a CO2 laser, and there were not any post-operative complications. The patient was discharged in two days. This report describes the case of nasopharyngeal stenosis in cat and represents that laser ablation could be a good option for surgical management of the nasopharyngeal region with a low complication rate.

Foot-and-mouth disease (FMD), which affects cloven-hoofed animals, is economically important because of its highly contagious nature. FMD virus (FMDV), the causative agent of FMD, involves seven serotypes (O, A, Asia1, C, and SAT 1-3). Serotype Asia1 is unique to the Asian territory and is subdivided into nine genetic groups (G-I-IX) based on nucleotide variations in the VP1 sequence. Asia1 Shamir, the most representative Asia1 vaccine, is not highly protective against the Asia1/MOG/05 (G-V) lineage found in North Korea in 2007. Therefore, we investigated whether a chimeric virus strain (Asia1/MOG/Shamir), in which the VP4, VP2, and VP3 sequences of Asia1/MOG/05 were combined with the VP1 sequence of Asia1 Shamir, can simultaneously protect against both viruses. We determined the optimal viral growth conditions for the commercial utilization of this chimeric virus strain. Of the three types of cell culture media, the Cellvento medium resulted in the highest amount of antigen in the samples. The chimeric strain was proliferated in a small bioreactor to produce a test vaccine, and its immunogenicity was evaluated in pigs. The virus neutralization (VN) titer against the Asia1 Shamir virus was > 1/100 after the second immunization with the chimeric vaccine in pigs. In addition, a single dose of the test vaccine resulted in a VN titer of > 1/100 against the Asia1/MOG/05 strain. Taken together, our chimeric vaccine strain provided sufficient protection against the Asia1/MOG/05 and Asia1 Shamir viruses, suggesting its potential as a novel vaccine for both these strains.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

The development of existing radioactive waste (RI waste) management technologies has been limited to processing techniques for volume reduction. However, this approach has limitations as it does not address issues that compromise the safety of RI waste management, such as the leakage of radioactive liquid, radiation exposure, fire hazards, and off-gas generation. RI waste comes in various forms of radioactive contamination levels, and the sources of waste generation are not fixed, making it challenging to apply conventional decommissioning and disposal techniques from nuclear power plants. This necessitates the development of new disposal facilities suitable for domestic use. Various methods have been considered for the solidification of RI waste, including cement solidification, paraffin solidification, and polymer solidification. Among these, the polymer solidification method is currently regarded as the most suitable material for RI waste immobilization, aiming to overcome the limitations of cement and paraffin solidification methods. Therefore, in this study, a conceptual design for a solidification system using polymer solidification was developed. Taking into account industrial applicability and process costs, a solidification system using epoxy resin was designed. The developed solidification system consists of a pre-treatment system (fine crush), solidification system, cladding system, and packing system. Each process is automated to enhance safety by minimizing user exposure to radioactive waste. The cladding system was designed to minimize defects in the solidified material. Based on the proposed conceptual design in this paper, we plan to proceed with the specific design phase and manufacture performance testing equipment based on the basic design.

The two-spotted spider mite, Tetranychus urticae Koch, is one of the most important agricultural pests. Therefore, we screened fifteen compounds from natural products for their spatial repellent and oviposition deterrent activities against T. urticae in the laboratory by using two-choice and no-choice tests. In the bridge two-choice test, nine compounds showed the spatial repellent effects on T. urticae at 20 mg dose, resulting in reduced numbers of eggs. Among the nine compounds, at 2 mg dose, two compounds were selected as having more spatial repellent activity than the others. The two compounds also showed spatial repellent and oviposition deterrent effects in the two-choice test from hosts. In the no-choice test from a host, the spatial repellent effects of the two compounds to T. urticae were significantly stronger than that of controls. These results suggest that the findings can be used as potential agents for the prevention and population control of T. urticae in the field.